1. Introducció
This manual provides essential information for the safe and efficient operation of your EPEVER MPPT Tracer2210AN G3 Solar Charge Controller. The Tracer-AN G3 series represents a new generation of MPPT solar charge controllers designed to maximize photovoltaic power utilization and extend battery life. It features independent voltage control, allowing loads to be powered even without a connected battery. This controller offers broad compatibility with both lithium and lead-acid batteries (AGM, GEL, Flooded, User types).
Si us plau, llegiu aquest manual detingudament abans de la instal·lació i l'ús per garantir-ne el funcionament i la seguretat adequats.
2. Instruccions de seguretat
- Ensure all wiring is performed by qualified personnel in accordance with local electrical codes.
- Always disconnect the solar panel and battery power before installing or adjusting the controller.
- Do not disassemble or attempt to repair the controller yourself. Contact authorized service personnel.
- Instal·leu el controlador en una zona ben ventilada, allunyada de materials inflamables i de la llum solar directa.
- Ensure correct polarity for all connections (PV, battery, load) to prevent damage to the controller and other components.
- Use appropriate circuit breakers or fuses for PV, battery, and load circuits.
- Wear protective eyewear when working with batteries.
3. Producte acabatview
3.1 Característiques clau
- Advanced MPPT technology for maximum power point tracking efficiency.
- High tracking efficiency over 99.5% and conversion efficiency up to 98%.
- Supports 12V/24VDC system voltage auto-recognition.
- Compatible with lead-acid (AGM, GEL, Flooded, User) and lithium batteries.
- Independent voltage control for loads, enabling power supply without a connected battery.
- Low power consumption and silent operation.
- Comprehensive electronic protection functions.
- LCD display for system status and parameter settings.
3.2 Components and Interface
The EPEVER Tracer2210AN G3 controller features a clear interface for easy operation and monitoring.
Figure 1: EPEVER Tracer2210AN G3 Solar Charge Controller with labeled components.
| No. | Component |
|---|---|
| 1 | Botó SELECT |
| 2 | RTS Interface (Remote Temperature Sensor) |
| 3 | Terminals fotovoltaics |
| 4 | Terminals de la bateria |
| 5 | Terminals de càrrega |
| 6 | RS485 Interface (non-isolated) |
| 7 | Mounting Hole (Φ 5mm) |
| 8 | Botó ENTER |
| 9 | Pantalla LCD |
4. Configuració i instal·lació
4.1 Ubicació de muntatge
Trieu una ubicació de muntatge que sigui:
- Well-ventilated to dissipate heat.
- Protected from direct sunlight, high temperatures, and moisture.
- Accessible for maintenance and wiring.
- Close to the battery, but in a separate, well-ventilated compartment if possible, to avoid battery gas corrosion.
4.2 Wiring Sequence
Follow the wiring sequence carefully to prevent damage. Always connect the battery first, then the PV array, and finally the load.
- Connecteu la bateria: Connect the battery to the controller's battery terminals. Ensure correct polarity.
- Connect the PV Array: Connect the solar panels to the controller's PV terminals. Ensure correct polarity.
- Connect the Load: Connect the DC load to the controller's load terminals. Ensure correct polarity.
Figura 2: Example connection sequence for the solar charge controller.
Figure 3: Detailed step-by-step connection guide.
4.3 Battery Type Configuration
The controller supports various battery types. For optimal charging and discharge protection, select the correct battery type in the controller settings.
Figure 4: Supported battery types including Lead-Acid (Gel, AGM, Flooded, User) and Lithium (LiFePO4, Li(NiCoMn)O2).
- Bateries de plom-àcid: AGM, GEL, Flooded, and User-defined types are supported.
- Bateries de liti: Supported. For detailed configuration of lithium battery parameters, optional EPEVER accessories such as a WiFi/Bluetooth adapter or a USB-RS485 cable are required.
5. Instruccions de funcionament
5.1 Pantalla LCD
The integrated LCD displays real-time system information, including battery voltage, PV voltage, charging current, and load status. Use the SELECT and ENTER buttons to navigate through the display menus.
5.2 Funcions dels botons
- Botó SELECCIÓ: Used to switch between different display screens or menu options.
- Botó ENTER: Used to confirm a selection or enter a menu for parameter modification.
5.3 Configuració dels paràmetres
Basic parameters can be viewed and adjusted directly via the LCD and buttons. For advanced settings, such as precise battery parameters or load control, external communication accessories are recommended.
Figure 5: The charge current is adjustable via a mobile application, with a minimum setting of 1A.
Optional accessories for advanced monitoring and configuration:
Figure 6: Accessory connection options (accessories not included).
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre controlador de càrrega solar.
- Comproveu les connexions: Periodically inspect all wiring connections for tightness and corrosion. Tighten any loose connections.
- Netegeu el controlador: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Do not use liquids.
- Inspeccionar per danys: Check for any physical damage to the casing, wires, or terminals.
- Ventilació: Ensure that the ventilation openings are not blocked to allow for proper heat dissipation.
- Salut de la bateria: Monitor de vol de la bateriatage and health. Ensure batteries are properly ventilated.
7. Solució De Problemes
Si teniu problemes amb el controlador, consulteu els problemes i solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla/Sense alimentació | Bateria no connectada o polaritat invertida; Volum de la bateriatage massa baix. | Comproveu les connexions i la polaritat de la bateria. Assegureu-vos del volum de la bateria.tage està per sobre del volum mínim de funcionamenttage. |
| Sense càrrega | PV array not connected or reverse polarity; PV voltage too low; PV array shaded. | Check PV connections and polarity. Ensure PV voltage is within operating range. Clear any shading. |
| La càrrega no funciona | Load not connected or reverse polarity; Load overcurrent/short circuit; Battery voltage massa baix. | Check load connections and polarity. Reduce load or check for short circuits. Charge battery. |
| Sobreescalfament del controlador | Poor ventilation; Excessive ambient temperature; Overload. | Ensure adequate ventilation. Relocate controller if ambient temperature is too high. Reduce load. |
If the problem persists after attempting these solutions, please contact EPEVER customer support or your local dealer.
8. Especificacions
8.1 Dades tècniques
| Paràmetre | Valor |
|---|---|
| Sistema nominal Voltage | 12/24 VDC Auto |
| Corrent de càrrega nominal | 20A |
| Corrent nominal de descàrrega | 20A |
| Rated Charge Power (12V/24V) | 260W/12V; 520 W/24 V |
| Màx. Circuit obert PV Voltage | 100 V |
| Temperatura de funcionament | -25 °C ~ +45 °C |
| Grau de Protecció | IP30 |
| Dimensions (L x A x A) | 220 x 154 x 52mm (8.66 x 6.06 x 2.05 polzades) |
| Pes | 0.94 kg (2.07 lliures) |
| Tipus de visualització | LCD |
| Material | Plàstic |
8.2 Funcions de protecció
- Protecció de polaritat inversa PV
- PV Overcurrent and Short Circuit Protection
- Sobrecàrrega d’entradatage i Undervoltage Protecció
- Protecció de polaritat inversa de la bateria
- Battery Overcharge and Over-discharge Protection
- Load Short Circuit and Overload Protection
- Controller Overheating Protection
- Battery Side Overcurrent Protection
9. Garantia i Suport
9.1 Informació de la garantia
The EPEVER MPPT Tracer2210AN G3 Solar Charge Controller comes with a Garantia del fabricant de 2 anysAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús i servei normals. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.
9.2 Certificacions
This product is certified with CE, FCC, IEC, ETL, and RoHS standards, ensuring compliance with international safety and environmental regulations.
9.3 Atenció al client
For technical assistance, warranty service, or any questions regarding your EPEVER product, please contact your authorized dealer or visit the official EPEVER weblloc de recursos de suport.
