MOUNTUP Monitor Mount Instruction Manual

1. Introducció

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. Informació de seguretat

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• No supereu la capacitat màxima de pes de 17.6 lliures (8 kg).
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• Mantingueu els nens i les mascotes allunyats durant la instal·lació.

3. Llista d'embalatge

Verifiqueu que tots els components siguin presents i no estiguin danyats abans de començar la instal·lació.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

El paquet ha d'incloure:

• Conjunt del braç del monitor (braços superior i inferior)
• Pal d'escriptori
• C-Clamp Base
• Components de la base del grommet
• Placa VESA
• All necessary screws, washers, and Allen keys
• Manual d'instruccions

4. Configuració i instal·lació

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp i opcions de muntatge amb ulleres.

4.1 C-Clamp Instal·lació

1. Enganxeu el C-clamp base to the desk pole using the provided screws and Allen key.
2. Position the assembled clamp and pole on the edge of your desk.
3. Apretar el C-clamp cargoleu fins que el suport estigui ben fixat a l'escriptori. Assegureu-vos que sigui estable i que no trontolli.

4.2 Instal·lació de l'olla de seguretat

1. Desmunteu el C-clamp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Fixació de la placa VESA al monitor

1. Col·loqueu amb cura el monitor cara avall sobre una superfície suau i neta.
2. Alineeu la placa VESA amb els forats de muntatge de la part posterior del monitor (75 x 75 mm o 100 x 100 mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Fixació del monitor al braç

1. Feu lliscar la placa VESA amb el monitor connectat al capçal de muntatge del braç del monitor.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 Gestió de cables

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 Guia de vídeo d'instal·lació

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. Funcionament i ajustos

The MOUNTUP monitor arm offers full motion capabilities for optimal viewcomoditat.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Ajust de la tensió de la molla de gas

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 Ajust d'inclinació

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewangles d'ajust.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 Gir i rotació

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim del suport del monitor.

• Neteja: Netegeu la muntura amb un drap suauamp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
• Inspecció: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
• Molla de gas: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.

7. Solució De Problemes

Si teniu algun problema, consulteu els següents problemes i solucions habituals:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• La muntura sembla inestable o inestable: Assegureu-vos que el C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Dificultat per moure el braç: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

Si els problemes persisteixen, poseu-vos en contacte amb l'atenció al client.

8. Especificacions

9. Garantia i Suport

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.