Màxima 755183179899

Maxxima 8-inch Recessed Commercial LED Downlight User Manual

Model: 755183179899

Introducció

This manual provides instructions for the installation, operation, and maintenance of the Maxxima 8-inch Recessed Commercial LED Downlight. This fixture features selectable color temperature (CCT) and wattage, offering versatility for various lighting needs. It is designed for commercial applications and is 0-10V dimmable, Energy Star certified, and UL listed.

Informació de seguretat

ADVERTIMENT: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

  • Llegiu totes les instruccions abans de la instal·lació.
  • Do not install in locations where the operating temperature exceeds -20°C to 40°C (-4°F to 104°F).
  • Apte per a damp ubicacions.
  • IC Rated: Suitable for direct contact with insulation.
  • Assegureu-vos que totes les connexions elèctriques siguin segures i que compleixin els codis i les ordenances locals.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

  • 1x Maxxima 8-inch Recessed Commercial LED Downlight
  • Pre-wired flexible metal conduit (whip)
  • Ceiling tension spring clips (pre-attached)
  • Femelles de filferro
  • Safety cable (pre-attached)

Especificacions

CaracterísticaEspecificació
Número de model755183179899
Entrada Voltage110-277 VAC, 50 / 60 Hz
WattageSelectable: 12W / 20W / 30W
BrillantorUp to 2400 Lumens (depending on wattage selecció)
Temperatura de color (CCT)Selectable: 2700K / 3000K / 3500K / 4000K / 5000K
Atenuació0-10V Dimming (20% to 100% range)
Dimensions10.2" Diameter x 4.6" Depth
Longitud del fuet18.5"
Safety Cable Length19.5"
Temperatura de funcionament-20 °C a 40 °C
CertificacionsEnergy Star, UL, IC Rated
MaterialMetall
Pes1.83 lliures

Configuració i instal·lació

Abans de començar: Ensure power is disconnected at the circuit breaker. This fixture is designed for flush mount installation into standard ceilings.

  1. Preparació de l'obertura del sostre: Create an appropriate size opening in the ceiling for the 8-inch downlight. Refer to local building codes for exact requirements.
  2. Connexions de cablejat:
    • Connect the black wire from the fixture's pre-wired whip to the live (hot) wire from the power supply using a wire nut.
    • Connect the white wire from the fixture's pre-wired whip to the neutral wire from the power supply using a wire nut.
    • Connect the green (ground) wire from the fixture's pre-wired whip to the ground wire from the power supply using a wire nut.
    • For 0-10V dimming, connect the purple wire to the dimmer's positive (+) dimming control wire and the gray wire to the dimmer's negative (-) dimming control wire. If not using dimming, cap these wires individually.

    Image: Maxxima 8-inch Recessed Commercial LED Downlight with flexible conduit and wiring.

    Maxxima 8-inch Recessed Commercial LED Downlight with flexible metal conduit and wiring connections

    This image displays the downlight with its pre-wired flexible metal conduit, showing the individual wires for power and dimming connections. The tension spring clips are visible on the sides.

  3. Fixació segura: Gently push the fixture into the ceiling opening. The pre-attached tension spring clips will automatically engage and secure the downlight firmly against the ceiling surface. Ensure the safety cable is also properly secured to a structural element if required by local codes.

Imatge: Enrere view of the Maxxima 8-inch Recessed Commercial LED Downlight showing tension clips.

Enrere view of Maxxima 8-inch Recessed Commercial LED Downlight with tension spring clips

This image shows the rear of the downlight, highlighting the robust tension spring clips that facilitate secure installation into the ceiling.

Instruccions de funcionament

The Maxxima 8-inch Recessed Commercial LED Downlight features selectable color temperature and wattage settings, allowing customization of light output.

  1. Selecciona la temperatura de color (CCT): Before installation, or by carefully removing the fixture, locate the 'KELVIN SETTING' switch on the back of the downlight. Slide the switch to select your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
  2. Seleccioneu Wattage: Locate the 'WATTAGE SETTING' switch on the back of the downlight. Slide the switch to select your desired wattage: Low (12W), Med (20W), or High (30W). This will adjust the lumen output accordingly.
  3. Funció d'atenuació: If connected to a compatible 0-10V dimmer, the light output can be adjusted from 20% to 100% brightness using the dimmer control.

Image: Maxxima 8-inch Recessed Commercial LED Downlight with CCT and Wattage interruptors selectores.

Close-up of Maxxima 8-inch Recessed Commercial LED Downlight showing Kelvin and Wattage interruptors selectores

Aquesta imatge ofereix un detall view of the back of the downlight, clearly showing the two slider switches for adjusting Kelvin (color temperature) and Wattage configuració.

Image: Commercial LED Downlight illustrating 5 CCT options.

Maxxima 8-inch Commercial LED Downlight with visual representation of 5 selectable color temperatures

This image visually demonstrates the different color temperature options (2700K, 3000K, 3500K, 4000K, 5000K) available with the 8-inch commercial LED downlight.

Manteniment

The Maxxima LED Downlight requires minimal maintenance. Ensure power is off before cleaning.

  • Neteja: Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp drap. No utilitzeu productes químics agressius, netejadors abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
  • Inspecció: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

Resolució de problemes

ProblemaCausa possibleSolució
La llum no s'encénNo power to the fixture; Loose wiring connection; Faulty switch/breakerCheck power supply at the circuit breaker. Verify all wire connections are secure. Test the switch or replace if faulty.
La llum parpelleja o s'atenua de manera inesperadaIncompatible dimmer; Loose wiring; Voltage fluctuacionsEnsure a compatible 0-10V dimmer is used. Check all wiring connections. Consult an electrician for voltage qüestions.
Temperatura de color o brillantor incorrectesCCT/Wattage selector switches set incorrectlyAdjust the CCT and Wattage selector switches on the back of the fixture to the desired settings.

Garantia

This Maxxima LED Downlight is backed by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

Suport

For technical assistance, troubleshooting, or product information, please contact Maxxima customer support. You can find contact details and additional resources on the official Maxxima weblloc web o visitant el Botiga Maxxima a Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.