Eoxsmile HOLA-CR1001E Digital Alarm Clock User Manual

Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your Eoxsmile HOLA-CR1001E Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Què hi ha a la caixa

• 1 x Digital Alarm Clock with White Digits
• 1 x Power Adapter and USB Cable
• 1 x Manual d'usuari
• 2 x Desk Standers

Producte acabatview

The Eoxsmile HOLA-CR1001E is a 7.5-inch digital alarm clock designed for clear visibility and ease of use. It features a large LED display with 1.8-inch white digits, dual alarms, a 5-level dimmer, and a USB charging port.

Configuració

1. Connexió d'alimentació

1. Connect the provided USB cable to the DC jack on the back of the alarm clock.
2. Plug the power adapter into a standard AC 100-240V wall outlet. The clock display will illuminate.

Nota: The clock requires continuous AC power for all functions, including the display and USB charging. The power adapter is 5V/2A.

2. Instal·lació de bateria de seguretat

1. Obriu la tapa del compartiment de les piles a la part posterior del rellotge.
2. Insert two (2) 1.5V 'AAA' batteries (not included), ensuring correct polarity (+/-).
3. Tanqueu la tapa del compartiment de la bateria.

Nota: The batteries serve as a backup for time and alarm settings during a power outage. The display will go blank, and other functions will not operate when running on battery backup alone, but the alarm will still sound at the scheduled time.

3. Configuració inicial de l'hora

Upon first power-up or after a prolonged power loss without battery backup, the time may need to be set. Refer to the 'Operating Instructions' section for detailed steps on setting the time.

Instruccions de funcionament

1. Setting Time (12/24H & DST)

• Locate the 'TIME SET' button (or similar) on the top or back of the clock.
• Press and hold the 'TIME SET' button to enter time setting mode. The hour digits will flash.
• Feu servir els botons '+' o '-' per ajustar l'hora.
• Press 'TIME SET' again to confirm the hour and move to minute setting. Adjust minutes with '+' or '-' buttons.
• Press 'TIME SET' a third time to exit time setting.
• To switch between 12-hour and 24-hour format, short press the '12/24H' button.
• To activate/deactivate Daylight Saving Time (DST), long press the 'DST' button.

2. Setting Dual Alarms

El rellotge admet dues alarmes independents (Alarma 1 i Alarma 2).

• Press the 'ALARM 1' button (or 'ALARM 2' for the second alarm). The alarm hour digits will flash.
• Use the '+' or '-' buttons to adjust the alarm hour.
• Press 'ALARM 1' (or 'ALARM 2') again to confirm the hour and move to minute setting. Adjust minutes with '+' or '-' buttons.
• Press 'ALARM 1' (or 'ALARM 2') a third time to activate the alarm and exit setting mode. An alarm icon will appear on the display.
• To turn off a sounding alarm for the day, press 'ALARM PAUSE'. The alarm will sound again the next day.
• To completely deactivate an alarm, press and hold 'ALARM OFF' until the alarm icon disappears from the display.

3. Ajust del volum de l'alarma

The alarm volume can be adjusted to 4 levels (70dB, 75dB, 80dB, 85dB).

• Locate the 'Vol+' and 'Vol-' buttons on the side of the clock.
• Press 'Vol+' to increase the alarm volume or 'Vol-' to decrease it.

4. Funció de posposició

When an alarm sounds, press the large 'SNOOZE' button on the top of the clock to pause the alarm for an additional 9 minutes of sleep. The snooze function can be repeated.

5. Regulador d'intensitat de la pantalla

La brillantor de la pantalla es pot ajustar a 5 nivells.

• Locate the 'DIMMER' button (often represented by a sun icon) on the top of the clock.
• Press the 'DIMMER' button repeatedly to cycle through the 5 brightness levels.

6. Port de càrrega USB

The clock includes a USB output charging port on the back for charging external devices.

• Connect your smartphone, tablet, or other USB-powered device to the USB charging port using its charging cable.
• El dispositiu començarà a carregar-se.

Nota: The USB charging port requires the alarm clock to be connected to AC power to function.

Manteniment

• Netegeu el rellotge amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Eviteu exposar el rellotge a temperatures extremes, llum solar directa o humitat elevada.
• Ensure the clock is placed on a stable, flat surface to prevent accidental falls.

Resolució de problemes

Problem: Display is blank.

Solució: Ensure the power adapter is securely plugged into both the clock and a working wall outlet. If using battery backup, the display is designed to be blank to conserve power; it will only show time when AC power is restored.

Problem: Alarm does not sound.

Solució: Verify that the alarm is activated (alarm icon visible on display). Check the alarm volume setting and ensure it is not set to the lowest level or muted. If running on battery backup, ensure batteries are fresh and correctly installed.

Problem: USB charging port is not working.

Solució: Confirm that the alarm clock is connected to AC power. The USB charging function is not supported when the clock is running on battery backup only.

Problem: Time is incorrect after a power outage.

Solució: Ensure fresh AAA batteries are installed for backup. If no batteries or depleted batteries were present, reset the time manually as per the 'Setting Time' instructions.

Especificacions

Garantia i Suport

Eoxsmile provides an 18-month warranty for this product, which includes a 12-month replacement policy and a 3-month refund option. For any questions or support needs, please contact Eoxsmile customer service.