Introducció
Welcome to your new FLEXISPOT EN1 standing desk. This manual provides essential information for the safe assembly, operation, and maintenance of your height-adjustable desk. Please read these instructions thoroughly before use to ensure proper functionality and longevity of your product.
Image: A visual comparison highlighting the enhanced stability of a single-piece desktop design, as featured on the FLEXISPOT EN1 desk, versus a two-piece desktop.
Informació de seguretat
This desk has a maximum weight recommendation of 154 lbs. Improper use may result in injury. Always ensure the desk is stable and does not wobble during height adjustments. Transitioning between sitting and standing positions should be done carefully to avoid injury. Prolonged sitting can lead to health issues, so consider taking regular breaks to stand or walk.
Contingut del paquet
Before assembly, verify that all components are present. Refer to the packing list provided with your product. Ensure all parts are undamaged before proceeding with assembly.
Imatge: Un cop mésview of the FLEXISPOT EN1 standing desk, showcasing the desktop, legs, and control panel as main components.
Instruccions de muntatge
Assembly typically requires two people. Follow the step-by-step guide included in your product packaging for detailed instructions. Ensure all screws are tightened securely to maintain stability.
- Attach the lifting columns to the desktop using the provided hardware.
- Secure the foot supports to the base of the lifting columns.
- Install the control panel and connect all necessary cables to the motor and power supply.
- Perform initial calibration as per the control panel instructions to ensure proper height adjustment range.
Image: The FLEXISPOT EN1 standing desk fully assembled in a home office environment, ready for use.
Instruccions de funcionament
Tauler de control acabatview
The desk features a programmable control panel for precise height adjustment and convenient memory presets.
Imatge: Un primer pla view of the programmable control panel, indicating buttons for up/down adjustment, an LED display, and four memory preset buttons.
Ajust d'alçada
- Manteniu premut el botó Up arrow button to raise the desk.
- Manteniu premut el botó Avall arrow button to lower the desk.
- Deixeu anar el botó per aturar l'escriptori a l'alçada desitjada.
Configuració de preajustos de memòria
- Adjust the desk to your preferred height for a specific position (e.g., sitting or standing).
- Premeu el botó M. button (or the designated memory set button).
- En 3 segons, premeu un dels botons numèrics (1, 2, 3 o 4) per desar l'alçada actual a aquesta configuració predefinida.
- To recall a saved height, simply press the corresponding number button. The desk will automatically move to the stored position.
Initializing/Resetting the System
If the desk does not respond, displays an error code, or operates abnormally, a system reset may be required. Consult the full user manual for specific reset procedures. Typically, this involves holding down certain buttons (often the 'Down' button or 'M' button) until the desk moves to its lowest position and resets its calibration.
Manteniment
- Regularly check all screws and bolts to ensure they are tight. Loose connections can affect stability and performance.
- Netegeu la superfície de l'escriptori amb un drap suau iamp drap. Eviteu utilitzar netejadors abrasius o productes químics agressius que puguin danyar l'acabat.
- Keep the motor and electrical components free from dust and moisture. Do not spray liquids directly onto the desk's electrical parts.
- Do not exceed the maximum weight capacity of 154 lbs to prevent damage to the lifting mechanism.
Image: A clean and organized FLEXISPOT EN1 desk setup, illustrating proper care and maintenance of the workspace.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'escriptori no es mou. | Power cable disconnected; desk overloaded; system error. | Check all power connections. Reduce weight on the desk. Perform a system reset as described in the operating instructions. |
| Desk moves unevenly or wobbles. | Loose assembly connections; uneven floor surface; unbalanced weight distribution. | Tighten all assembly screws. Adjust the foot levelers to stabilize the desk on uneven floors. Redistribute items on the desktop evenly. |
| Codi d'error que es mostra al tauler de control. | Indicates a specific system malfunction. | Refer to the complete user manual for a list of error codes and their corresponding solutions. Often, a system reset can resolve minor errors. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | FLEXISPOT |
| Número de model | 156E |
| Dimensions del producte (P x A x A) | 24 "P x 40" W x 46.3" H |
| Mida d'escriptori | 40x24" WholePiece |
| Color | Blanc |
| Altura mínima | 28 polzades |
| Altura màxima | 47.6 polzades |
| Recomanació de pes màxim | 154 lliures |
| Material base | Steel, Reclaimed Wood |
| Tipus de material superior | Fusta d'enginyeria |
| Mecanisme d'elevació | Standard Two Button Controller |
| Presets de memòria | 4 |
| Pes de l'article | 56 lliures |
| Muntatge requerit | Sí (es recomana 2 persones) |
| Llistat UL | Sí |
Image: A diagram illustrating the key dimensions of the FLEXISPOT EN1 standing desk, including desktop width (40"), depth (24"), and the adjustable height range.
Garantia i Suport
The FLEXISPOT EN1 standing desk comes with a 1-year manufacturer's warranty covering parts. For warranty claims, technical support, or assistance with any issues, please contact FLEXISPOT customer service directly.
You can find more information and support resources on the official FLEXISPOT weblloc: www.flexispot.com