Reebok RDVNEG9P2S2B2N Digital Watch User Manual

1. Introducció

Thank you for choosing the Reebok RDVNEG9P2S2B2N Digital Watch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read this manual thoroughly before using the watch to ensure optimal performance and longevity.

2. Informació de seguretat

• Resistència a l'aigua: This watch is water resistant up to 100 meters. It is suitable for swimming and snorkeling but not for diving. Do not operate buttons underwater.
• Temperatura: Avoid exposing the watch to extreme temperatures (hot or cold) for extended periods, as this may affect its accuracy and battery life.
• Productes químics: Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the strap, case, or seals.
• Impacte: Protect the watch from strong impacts or drops, which can damage internal components or the crystal.
• Bateria: Do not attempt to open the watch case or replace the battery yourself, as this may void the warranty and damage the watch. Refer to qualified service personnel.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Reebok RDVNEG9P2S2B2N Digital Watch (with Stainless Steel Strap)
• Extra Silicone Strap
• Spring Bar Tool for strap replacement
• Manual d'usuari (aquest document)

4. Producte acabatview

Familiarize yourself with the main components of your Reebok digital watch.

Imatge 1: Davant view of the Reebok RDVNEG9P2S2B2N Digital Watch with its gold stainless steel strap. The digital display shows time and date, and control buttons are visible on the sides.

• Visualització: Digital screen showing time, date, and other functions.
• Botó SET: S'utilitza per introduir i confirmar la configuració.
• Botó MODE: Cycles through different watch modes (Time, Alarm, Stopwatch, etc.).
• Botó ADJ: Adjusts values during setting.
• Botó LLUM: Activa la retroiluminació per a la visibilitat en condicions de poca llum.
• Cas: Gold-colored stainless steel case.
• Corretja: Interchangeable straps (Stainless Steel and Silicone).

Imatge 2: The Reebok RDVNEG9P2S2B2N Digital Watch worn on a wrist, showcasing its size and fit with the gold stainless steel strap.

5. Configuració

5.1 Configuració inicial de la data i l'hora

1. In normal timekeeping mode, press and hold the SET fins que els segons comencin a parpellejar. Això indica que esteu en mode de configuració.
2. Premeu el botó MODE per anar canviant per la configuració: Segons → Hora → Minut → Any → Mes → Dia.
3. Utilitza el ADJ button to increase the flashing value. Hold the ADJ button to rapidly advance the value.
4. Un cop ajustats tots els paràmetres, premeu el botó SET de nou el botó per sortir del mode de configuració i desar els canvis.

5.2 Format de 12/24 hores

While in time setting mode (seconds flashing), press the ADJ quan l'hora parpelleja per alternar entre els formats de 12 hores (amb indicador AM/PM) i 24 hores.

6. Funcionament del rellotge

6.1 Selecció del mode

Premeu el botó MODE premeu el botó repetidament per anar ciclant entre les funcions disponibles:

• Timekeeping Mode (displays current time and date)
• Mode d'alarma
• Mode de cronòmetre

6.2 Ús de la retroiluminació

Premeu el botó LLUM button to illuminate the display for a few seconds. This is useful in dark environments.

6.3 Funció d'alarma

1. Des del mode de mesura del temps, premeu MODE until "AL" or "Alarm" appears on the display.
2. Manteniu premut el botó SET button until the alarm hour flashes.
3. Utilitza el ADJ botó per configurar l'hora desitjada. Premeu MODE passar als minuts.
4. Utilitza el ADJ botó per configurar els minuts desitjats.
5. Premeu SET per confirmar i sortir de la configuració de l'alarma.
6. Per activar/desactivar l'alarma, premeu el botó ADJ button while in Alarm Mode (without holding SET). An alarm icon will appear/disappear.

6.4 Funció de cronòmetre

1. Des del mode de mesura del temps, premeu MODE until "ST" or "Stopwatch" appears on the display.
2. Premeu el botó ADJ botó per iniciar el cronòmetre.
3. Premeu el botó ADJ de nou per posar en pausa el cronòmetre.
4. Premeu el botó SET botó per reiniciar el cronòmetre a zero.
5. Per sortir del mode de cronòmetre, premeu la tecla MODE botó.

7. Substitució de la corretja

Your Reebok watch comes with an extra silicone strap and a spring bar tool for easy strap changes. Follow these steps carefully to avoid scratching your watch or damaging the spring bars.

7.1 Removing the Current Strap

1. Place the watch face down on a soft, clean cloth to prevent scratches.
2. Locate the spring bar tool. It typically has a forked end.
3. Insert the forked end of the tool between the strap and the watch lug (the part of the watch case where the strap attaches).
4. Gently push the spring bar inwards (towards the center of the strap) to compress it.
5. Once one end of the spring bar is disengaged from the lug hole, carefully pull the strap away from the watch.
6. Repeat for the other side of the strap and for the second strap piece.
7. Keep the spring bars in a safe place if you intend to reuse the strap.

7.2 Attaching a New Strap

1. Insert one end of a spring bar into one of the lug holes on the watch case.
2. With the spring bar tool, compress the other end of the spring bar.
3. Guide the compressed end into the opposite lug hole.
4. Release the spring bar tool, ensuring both ends of the spring bar are securely seated in the lug holes. Gently tug on the strap to confirm it is firmly attached.
5. Repeat for the second strap piece.

8. Manteniment

8.1 Neteja

• Watch Case and Stainless Steel Strap: Wipe regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp drap i sabó suau, després assecar-lo bé.
• Corretja de silicona: Wash with mild soap and water, then rinse and dry completely.
• Avoid using abrasive cleaners or chemical solvents.

8.2 Cura de la resistència a l'aigua

• Ensure the watch crown (if applicable, though this is a digital watch with buttons) and buttons are fully pressed in before any contact with water.
• Do not operate buttons while the watch is submerged in water.
• Després de l'exposició a l'aigua salada, esbandiu el rellotge amb aigua fresca i eixugueu-lo bé.
• Water resistance is not a permanent condition and may decrease over time. Have the seals checked periodically by a qualified technician.

8.3 Substitució de la bateria

When the display becomes dim or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a professional watch technician to ensure proper sealing and water resistance integrity.

9. Solució De Problemes

10. Especificacions

• Número de model: RDVNEG9P2S2B2N
• Tipus de visualització: Digital
• Moviment: Quars
• Material de la caixa: Acer inoxidable
• Diàmetre de la caixa: 42 mm
• Gruix de la caixa: 5 mm
• Material de la corretja: Stainless Steel (Gold), Silicone (Extra)
• Amplada de la corretja: 4 cm
• Cristall: Mineral
• Resistència a l'aigua: 100 metres (330 peus)
• Font d'alimentació: Bateria
• Tipus de tancament: Buckle (for silicone), Elegant Clasp (for stainless steel)

11. Garantia i Suport

11.1 Garantia del fabricant

This Reebok watch is covered by a manufacturer's warranty. Please refer to the warranty card included in your original packaging for specific terms, conditions, and duration. The warranty typically covers manufacturing defects but does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

11.2 Atenció al client

For technical assistance, warranty claims, or service inquiries, please contact Reebok customer support through their official website or the contact information provided with your purchase documentation. When contacting support, please have your watch model number (RDVNEG9P2S2B2N) and proof of purchase readily available.