Introducció
This manual provides essential information for the safe and efficient use of your EGLO G80 E26 LED Filament Bulb, Model 204663J. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: EGLO G80 E26 LED Filament Bulb, front view.
Configuració i instal·lació
Follow these steps to install your LED filament bulb:
- La seguretat primer: Before attempting any installation, ensure the power supply to the light fixture is turned OFF at the circuit breaker or wall switch.
- Permetre la refrigeració: If replacing an existing bulb, allow the old bulb to cool completely before removal to prevent burns.
- Traieu la bombeta antiga: Carefully unscrew the old bulb from the E26 socket by turning it counter-clockwise.
- Instal·lar una bombeta nova: Gently screw the EGLO G80 LED Filament Bulb into the E26 socket by turning it clockwise until it is snug. Do not overtighten.
- Restaura l'alimentació: Un cop instal·lada la bombeta de manera segura, restableix l'alimentació del llum.
Important: This bulb is designed for E26 base sockets only. Ensure your fixture is compatible before installation.
Figure 2: EGLO G80 E26 LED Filament Bulb with dimensions (Diameter 80mm x Height 120mm).
Instruccions de funcionament
The EGLO G80 LED Filament Bulb operates like a standard light bulb. Once installed in a compatible fixture with power restored, simply use the fixture's switch to turn the light ON or OFF.
- Encès/apagat: Use the wall switch or fixture switch to control the bulb's illumination.
- No regulable: This bulb is not designed for use with dimmer switches. Using it with a dimmer may cause damage to the bulb or fixture, and will void the warranty.
Figure 3: EGLO G80 E26 LED Filament Bulb illuminated in a light fixture.
Video 1: General demonstration of EGLO lighting applications. While the video title mentions 'smart bulb,' the principles of installation and light output are applicable to this EGLO LED filament bulb.
Manteniment
The EGLO LED Filament Bulb requires minimal maintenance.
- Neteja: To clean the bulb, ensure the power is OFF and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Substitució: When the bulb reaches the end of its rated life, replace it with a new EGLO G80 E26 LED Filament Bulb or a compatible E26 LED bulb.
Resolució de problemes
If your EGLO LED Filament Bulb is not functioning correctly, consider the following:
- La bombeta no s'encén:
- Check if the power switch for the fixture is ON.
- Ensure the bulb is screwed in securely into the E26 socket.
- Verifiqueu que l'interruptor automàtic de l'aparell no s'hagi disparat.
- Test the bulb in another working E26 fixture, or test another known working bulb in the original fixture to determine if the issue is with the bulb or the fixture.
- Parpelleig:
- Ensure the bulb is not used with a dimmer switch, as this bulb is not dimmable.
- Check for loose connections in the fixture or wall switch.
If problems persist after performing these checks, consult a qualified electrician or contact customer support.
Especificacions
| Marca | EGLO |
| Número de model | 204663J |
| Tipus de llum | LED |
| Base del bulb | E26 |
| Wattage | 3.5 W |
| Equivalent incandescent | 40 W |
| Flux lluminós | 400 lm |
| Temperatura de color | 2700 K (blanc càlid) |
| Índex de reproducció del color (CRI) | Ra> 80 |
| Angle del feix | 320 graus |
| Vida valorada | 15,000 hores |
| Voltage | 100 V |
| Font d'alimentació | AC |
| Material | Vidre (transparent) |
| Mida del cos | Diàmetre 80 mm x alçada 120 mm |
| Pes | 51 g |
| País d'origen | Xina |
Informació de la garantia
This product comes with a warranty of up to 1 year. Please refer to the specific warranty terms and conditions provided at the time of purchase for full details regarding coverage and claims.
Atenció al client
For further assistance, technical support, or warranty claims, please contact the retailer from whom you purchased the product or refer to the EGLO official weblloc per obtenir informació de contacte.
