Manual d'usuari de l'interruptor tàctil de vidre de 4 relés MCO Home Z-Wave MH-S314

1. Introducció

The MCO Home MH-S314 is a sophisticated Z-Wave enabled 4-relay glass touch switch designed to control up to four connected loads. It combines the functionality of a traditional wall switch with advanced remote control capabilities via the Z-Wave wireless protocol. Its elegant glass surface and modern design seamlessly integrate into any contemporary interior.

This switch can be integrated into a Z-Wave network, allowing control through your Z-Wave gateway or remote controller. It is capable of controlling various types of loads, including lighting and other electrical equipment. The MH-S314 also supports direct association (Group 1), enabling it to control up to five other associated Z-Wave devices manually or via your Z-Wave controller. Each touch button is equipped with an LED indicator to display the ON/OFF status of the corresponding load.

Nota important:

This switch requires a neutral wire connection and an integrated square junction box (70 x 70 mm) for proper installation.

2. Característiques clau

• 4-Channel Control: Remote control capability for up to four independent devices.
• Substitució fàcil: Designed to replace existing wall switches.
• Funcionalitat On/Off: Simple and reliable switching for connected loads.
• Disseny modern: Elegant glass surface with touch-sensitive buttons.
• Z-Wave Compatibility: Seamless integration into Z-Wave smart home networks.
• Indicadors LED: Visual feedback for the ON/OFF status of each channel.
• Direct Association: Ability to control up to 5 other Z-Wave devices directly.

3. Configuració i instal·lació

3.1 Precaucions de seguretat

• Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
• La instal·lació l'ha de dur a terme un electricista qualificat d'acord amb les normes elèctriques locals.
• Ensure the switch is rated for the connected load.
• No exposeu el dispositiu a la humitat ni a temperatures extremes.

3.2 Esquema de cablejat

The MH-S314 requires a neutral wire for operation. Below is a general wiring guide. Refer to the specific diagram provided with your product packaging for detailed instructions.

Figure 1: MCO Home MH-S314 4-Relay Glass Touch Switch. This image shows the sleek black glass panel with four illuminated touch circles, indicating its four-channel control capability.

• L (en directe): Connect to the live wire from your electrical supply.
• N (neutre): Connect to the neutral wire from your electrical supply.
• L1, L2, L3, L4 (Load): Connect to the live wires of the devices you wish to control (e.g., lights, fans).
• Terra: Assegureu-vos una correcta connexió a terra per seguretat.

Ensure all connections are secure and insulated before restoring power.

3.3 Inclusió de Z-Wave (emparellament)

1. Place your Z-Wave gateway/controller into inclusion (pairing) mode. Refer to your gateway's manual for specific instructions.
2. With the MH-S314 powered on, quickly press any of the touch buttons three times within 1.5 seconds.
3. The LED indicator on the switch will flash to confirm successful inclusion.
4. If inclusion fails, repeat the process. You may need to exclude the device first (see 3.4 Exclusion).

3.4 Z-Wave Exclusion (Unpairing)

1. Place your Z-Wave gateway/controller into exclusion (unpairing) mode.
2. With the MH-S314 powered on, quickly press any of the touch buttons three times within 1.5 seconds.
3. The LED indicator on the switch will flash to confirm successful exclusion.
4. The switch will reset to factory defaults after successful exclusion.

4. Instruccions de funcionament

4.1 Funcionament manual

Each of the four touch circles on the glass panel corresponds to a specific relay. To manually control a connected load:

• Activar: Lightly touch the desired circle on the glass panel. The corresponding LED will illuminate.
• DESACTIVAR: Lightly touch the same circle again. The corresponding LED will turn off.

4.2 Z-Wave Remote Control

Once successfully included in your Z-Wave network, you can control the MH-S314 remotely using your Z-Wave gateway's interface or a compatible Z-Wave remote controller. The switch will appear as a multi-channel switch, allowing individual control of each of the four relays.

Refer to your Z-Wave gateway's user manual for instructions on how to control connected devices.

4.3 Grups d'associació

The MH-S314 supports Z-Wave Association Groups, allowing it to directly control other Z-Wave devices without needing to route commands through the central controller. This can be useful for creating direct relationships between devices.

• Grup 1 (línia de vida): Reports status changes to the Z-Wave controller.
• Group 2, 3, 4, 5 (Control Groups): Each button can be associated with other Z-Wave devices (up to 5 nodes per group) to control them directly.

Configuration of association groups is typically done through your Z-Wave gateway's advanced settings.

5. Manteniment i resolució de problemes

5.1 Neteja

To clean the glass surface of the switch, gently wipe it with a soft, damp drap. No utilitzeu netejadors abrasius ni dissolvents, ja que poden danyar l'acabat.

Resolució de problemes 5.2

If you encounter persistent issues not covered here, please contact MCO Home customer support.

6. Especificacions tècniques

Nota: Les especificacions estan subjectes a canvis sense previ avís.

7. Garantia i Suport

MCO Home products are designed for reliability and performance. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official MCO Home weblloc.

For technical support, troubleshooting assistance, or inquiries about product functionality, please contact MCO Home customer service through their official channels. Keep your purchase receipt and product model number handy when contacting support.

Recursos en línia: For the latest manuals, firmware updates, and FAQs, please visit the MCO Home support page.