DUMEE 634

DUMEE Twin Bed Frame Instruction Manual

Model: 634, Textured White

Informació important de seguretat

Si us plau, llegiu i enteneu totes les instruccions abans del muntatge i l'ús. Si no seguiu aquestes instruccions, podeu patir lesions o danys al producte.

  • Always follow assembly instructions carefully to prevent instability.
  • Be cautious of sharp edges when handling metal frame components.
  • No supereu el límit màxim de pes de 226.8 kg (500 lliures).
  • Ensure all bolts are securely tightened before use. Periodically check and re-tighten all connections.
  • Mantingueu les peces petites allunyades dels nens durant el muntatge.

Contingut del paquet

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact DUMEE customer support.

  • Seccions de capçal i peu de llit
  • Carrils laterals
  • Llistons d'acer
  • Cames de suport
  • Paquet de ferramenta (cargols, volanderes, femelles, clau Allen)
  • Manual d'instruccions de muntatge

Muntatge i muntatge

Assembly typically requires two people and approximately 1-2 hours. Follow the numbered steps provided in the included instruction leaflet. Ensure all parts are correctly oriented before tightening.

  1. Desempaquetar i identificar les peces: Lay out all components on a clean, soft surface to prevent scratches. Match each part to the corresponding label in the instruction manual.
  2. Assemblea inicial: Begin by attaching the side rails to the headboard and footboard. Insert bolts loosely at this stage.
  3. Instal·leu les potes de suport: Attach any central support legs to the frame. Ensure they are aligned vertically.
  4. Col·locar llistons: Position the steel slats across the frame. Secure them according to the instructions.
  5. Ajustament final: Once all parts are assembled and aligned, systematically tighten all bolts using the provided Allen wrench. Do not overtighten.
Diagram showing the dimensions of the DUMEE Twin Bed Frame.
Figure 1: DUMEE Twin Bed Frame Dimensions. Width: 39.37 inches, Length: 77.56 inches, Headboard Height: 40.43 inches, Footboard Height: 22.43 inches, Under-bed Clearance: 10.63 inches.
Assembled DUMEE Twin Bed Frame in a bedroom setting.
Figure 2: Fully assembled DUMEE Twin Bed Frame in a bedroom.

Instruccions de funcionament

The DUMEE Twin Bed Frame is designed to support a twin-sized mattress directly on its steel slats, eliminating the need for a box spring.

  • Col·locació del matalàs: Place your twin-sized mattress directly onto the steel slat support system. Ensure the mattress is centered and fully supported.
  • Capacitat de pes: The bed frame has a maximum weight recommendation of 226.8 kg (500 lbs), including the mattress and occupants. Do not exceed this limit.
  • Under-bed Storage: The frame provides approximately 10.63 inches of clearance for under-bed storage. Utilize this space for storage boxes or other items to maximize room efficiency.
DUMEE Twin Bed Frame showing under-bed storage space with baskets.
Figure 3: Under-bed storage space with baskets, demonstrating practical use.

Manteniment

Regular maintenance ensures the longevity and stability of your bed frame.

  • Neteja: Wipe the metal frame with a dry cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals that may damage the powder-coated finish.
  • Estanquitat del cargol: Periodically (e.g., every 3-6 months) check all assembly bolts and re-tighten them as necessary. Loose bolts can lead to instability and noise.
  • Anti-Noise Plugs: The frame is designed with anti-noise plastic plugs. Ensure these remain securely in place to minimize squeaking.
Close-up of the anti-noise plastic plug design on the bed frame.
Figure 4: Detail of the anti-noise plastic plug design, which helps prevent squeaking.

Resolució de problemes

ProblemaCausa possibleSolució
El marc del llit grinyolaLoose bolts; metal-on-metal friction; missing anti-noise plugs.Re-tighten all bolts. Ensure anti-noise plastic plugs are correctly installed.
Les peces no s'alineen durant el muntatgeIncorrect part orientation; bolts tightened too early.Loosen all bolts, re-check part labels and orientation, then reassemble. Ensure bolts are only finger-tight until final step.
Peces faltes o danyadesError d'embalatge; danys durant l'enviament.Do not proceed with assembly. Contact DUMEE customer support immediately for replacement parts.
El marc sembla inestableLoose connections; improper assembly.Ensure all bolts are fully tightened. Verify that all components are assembled according to the instructions.

Especificacions

CaracterísticaDetall
Número de model634
MidaBessona
MaterialAcer metàl·lic
ColorBlanc amb textura
Tipus d'acabatRecobert de pols
EstilVintage
Dimensions del producte (aprox.)Width: 39.37 inches, Length: 77.56 inches, Headboard Height: 40.43 inches, Footboard Height: 22.43 inches
Liquidació sota el llit10.63 polzades
Recomanació de pes màxim226.8 kg (500 lliures)
Característica especialSqueak Resistant, No Box Spring Needed
Components inclososLlistó

Garantia i Suport

DUMEE provides a 12 mesos de garantia for this product from the date of purchase. This warranty covers manufacturing defects under normal use.

For any questions regarding product assembly, missing parts, or warranty claims, please contact DUMEE customer service. Refer to your purchase documentation or the DUMEE official weblloc web per obtenir la informació de contacte més actualitzada.

Manufacturer Contact Information: shenzhen, guangdong 518110, CN

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.