Introducció
Thank you for choosing the KING PB1000 Antenna Power Injector Switch. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.
The KING PB1000 is a 12-volt DC power supply designed for amplified antennas. It features a flush wall mount plate, inputs for both TV antenna and cable, a built-in selector switch, and F-type connectors for two TV outputs.
Producte acabatview
The KING PB1000 combines an antenna power injector with a signal selector switch, allowing you to easily switch between an amplified antenna and a cable TV input. It provides power to your amplified antenna and distributes the signal to up to two televisions.
- Provides 12-volt DC power for ampantenes lificades.
- Includes inputs for both TV antenna and cable signals.
- Features a built-in selector switch for easy source selection.
- Equipped with F-type connectors for two TV outputs.
- Designed for flush wall mounting.
Contingut del paquet
Verifiqueu que hi hagi tots els elements abans de continuar amb la instal·lació:
- 12VDC TV Antenna Power Switch/Wall Plate (White)
- Cargols de muntatge (normalment inclosos)
Informació de seguretat
Si us plau, observeu les següents precaucions de seguretat durant la instal·lació i el funcionament:
- Ensure the 12V DC power source is disconnected before installation to prevent electrical shock.
- No exposeu el dispositiu a la humitat ni a temperatures extremes.
- Utilitzeu les eines adequades per a la instal·lació.
- Verify all connections are secure to prevent signal loss or electrical issues.
- This device is designed for 12V DC systems only. Do not connect to other voltage fonts.
Configuració i instal·lació
The KING PB1000 is designed for flush wall mounting. Follow these steps for proper installation:
- Preparació de la ubicació de muntatge: Select a suitable location for the wall plate, typically near your television(s) and where existing wiring can be accessed. Ensure adequate space behind the wall for connections.
- Desconnecteu l'alimentació: Before making any electrical connections, ensure the 12V DC power supply to the installation area is completely disconnected to prevent electrical shock.
- Connexions de cable:
- Alimentació de 12 V CC: Connect the 12V DC positive (+) wire to the designated power input terminal on the back of the switch. Connect the negative (-) wire (ground) to the corresponding terminal.
- Entrada d'antena: Connect the coaxial cable from your amplified TV antenna to the "ANTENNA" input F-connector on the back of the switch.
- Cable TV Input: If utilizing, connect the coaxial cable from your cable TV source to the "CABLE" input F-connector on the back of the switch.
- TV Outputs: Connect coaxial cables from the two "TV OUTPUT" F-connectors (one visible on the front plate, others typically on the back) to the antenna/cable input ports on your televisions.
- Muntar l'interruptor: Carefully position the switch into the wall opening. Secure it using appropriate mounting screws. Avoid overtightening.
- Restaura l'alimentació: Once all connections are secure and the switch is mounted, restore the 12V DC power supply.
Important: Ensure all coaxial connections are finger-tight to prevent signal loss and ensure optimal performance.
Instruccions de funcionament
The KING PB1000 features a simple push-button selector switch on the front plate to manage your signal source and antenna power.
- Alimentació de l'antena: Press the push-button switch on the front plate. When the indicator light (typically an LED) illuminates, the amplified antenna is receiving 12V DC power, and its signal is being routed to the TV outputs.
- Selecting Cable TV: Press the push-button switch again. When the indicator light is off, the antenna power is disengaged, and the cable TV signal (if connected) is routed to the TV outputs.
- Television Tuning: After selecting your desired source (Antenna or Cable), use your television's remote control to scan for channels or select the appropriate input.
Nota: For optimal antenna performance, ensure the indicator light is on when using the ampantena llificada.
Manteniment
The KING PB1000 requires minimal maintenance to ensure continued performance.
- Neteja: Periodically wipe the front plate with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Connexions: Occasionally check all coaxial and power connections to ensure they remain secure. Loose connections can lead to signal degradation.
- Inspecció: Inspect the device for any signs of physical damage. If damage is observed, discontinue use and consult a qualified technician.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No TV signal or poor picture quality. |
|
|
| Antenna indicator light does not illuminate. |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Marca | REI |
| Número de model | PB1000 |
| Entrada de potència | 12V DC |
| Antenna Type Supported | AmpAntena de TV de qualitat |
| Entrades | TV Antenna, Cable TV |
| Sortides | 2 x F-type TV Outputs |
| Muntatge | Muntatge encastat a la paret |
| Color | Blanc |
| Pes de l'article | 2.82 unces |
| Dimensions del producte | 7 x 4 x 3 polzades |
| UPC | 660045124408 |
Garantia i Suport
Specific warranty information for the KING PB1000 Antenna Power Injector Switch is not detailed in the provided product data. For warranty claims or detailed support, please refer to the official KING weblloc web o contacteu directament amb el seu servei d'atenció al client.
Per a assistència tècnica o més consultes, visiteu el KING Store on Amazon o el responsable del fabricant weblloc.