ExBrite 30x36 inch Backlit LED Lighted Bathroom Mirror Instruction Manual

1. Informació important de seguretat

Please read this entire manual carefully before installation and use. Keep these instructions for future reference.

• Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
• Installation must be performed by a qualified electrician in accordance with all local codes and regulations.
• No intenteu modificar el mirall ni els seus components elèctrics.
• Eviteu utilitzar productes de neteja abrasius o objectes punxeguts a la superfície del mirall.
• This mirror is rated IP44 for water resistance, suitable for bathroom environments. However, avoid direct water spray onto electrical components.

2. Configuració i instal·lació

2.1 Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• ExBrite LED Lighted Bathroom Mirror (30x36 inch)
• Maquinari de muntatge (cargols, ancoratges)
• Manual d'instruccions

2.2 Selecció d'una ubicació

Select a suitable wall location in your bathroom. Ensure the wall can support the mirror's weight (approximately 33.8 pounds). The mirror can be mounted vertically or horizontally.

2.3 Instruccions de muntatge

1. Measure and mark the desired mounting height and width on the wall. Refer to the mirror's dimensions (30 inches wide by 36 inches long).
2. Perforeu forats pilot als llocs marcats. Inseriu ancoratges de paret si cal.
3. Secure the mounting brackets to the wall using the provided screws. Ensure they are level and firmly attached.
4. Carefully lift the mirror and hang it onto the installed mounting brackets. Ensure it is securely seated.

Image: ExBrite 30x36 inch LED Bathroom Mirror installed above a vanity, showcasing its backlit illumination.

Image: Diagram illustrating the 30-inch width and 36-inch length of the mirror.

2.4 Connexió elèctrica

The mirror can be connected via a standard plug or hardwired. For hardwiring, consult a qualified electrician.

• Instal·lació del connector: Plug the mirror's power cord into a standard electrical outlet.
• Instal·lació per cable: Disconnect power at the circuit breaker. Connect the mirror's wiring to the appropriate household wiring (Live, Neutral, Ground) according to local electrical codes. Ensure all connections are secure and insulated.

Imatge: Part posterior view of the mirror, highlighting the fully sealed construction and power cord connection point.

3. Instruccions de funcionament

The ExBrite LED mirror features intuitive touch controls for lighting and anti-fog functions.

3.1 Engegada/Apagada i Ajust de la Brillantor

• Potència: Touch the power button icon on the mirror surface to turn the LED lights on or off.
• Ajust de brillantor (atenuació): With the lights on, press and hold the power button icon for approximately 3 seconds to adjust the brightness level. The brightness will cycle through its range; release the button when the desired brightness is reached. The mirror will memorize your last brightness setting when turned off.

Image: Visual representation of the dimmable feature, showing brightness adjustment by pressing and holding the switch button.

3.2 Ajust de temperatura de color

• Temperatura de color: With the lights on, touch the color temperature button icon (often represented by a sun or color spectrum) to cycle through different color temperatures: Warm (3000K), Warm White, and Cold White (6400K).

Image: Three mirrors displaying the adjustable color temperatures: Warm (3000K), Warm White, and Cold White (6400K).

3.3 Funció antiboira

• Activate Defogger: Touch the defogger button icon (often represented by steam or wavy lines) to activate the anti-fog function. This will clear condensation from the mirror surface.
• Apagat automàtic: The anti-fog function is designed to automatically switch off after 1 hour to conserve energy.

Image: Diagram illustrating the anti-fog function, showing how it clears condensation from the mirror surface from inside to outside.

3.4 Operational Overview Vídeo

4. Manteniment i cura

4.1 Neteja del mirall

• Apagueu sempre el mirall i desconnecteu-lo de l'alimentació abans de netejar-lo.
• Utilitzeu un suau, damp cloth with a mild glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror surface, especially near electrical components.
• Wipe the mirror surface gently to avoid scratches.
• Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the mirror's finish or electrical components.

4.2 LED Light Longevity

The integrated LED lights are designed for long-term use, with an estimated lifespan of 50,000 hours and 90% energy saving compared to traditional lighting. They also feature a Color Rendering Index (CRI) of over 90 for accurate color representation.

Image: Features of the LED lighting, including 50,000 hour lifespan, 90% energy saving, and a Color Rendering Index greater than 90.

5. Solució De Problemes

If you encounter issues with your ExBrite LED mirror, please refer to the following common solutions:

• Els llums no s'encenen:
  • Check if the power cord is securely plugged into the outlet or if the hardwired connection is properly made.
  • Verify that the circuit breaker for the bathroom is not tripped.
  • Ensure the touch power button is being pressed correctly.
• Dimming or color temperature not changing:
  • Ensure you are pressing and holding the power button for dimming, or tapping the color temperature button for color changes.
  • Clean the touch sensor area to ensure no obstructions.
• Anti-fog not working:
  • Ensure the anti-fog button is activated.
  • Deixeu uns minuts perquè el desbaixador s'escalfi i netegi la superfície del mirall.

If these steps do not resolve the issue, please contact ExBrite customer support for further assistance.

6. Especificacions del producte

7. Informació de la garantia

ExBrite provides a 5 any de garantia for this product, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For detailed warranty terms and conditions, please refer to the official ExBrite weblloc o contacteu amb el servei d'atenció al client.

8. Atenció al client

Should you require assistance, have questions, or need to report an issue, please contact ExBrite customer service.

• Suport per correu electrònic: Expect a reply by email within 24 hours.
• Recursos en línia: Visit the official ExBrite website for FAQs and additional product information.

We are committed to providing excellent service and support for your ExBrite product.