Sentinel Formula 538

Sentinel Formula 538 Smoke & Odor Primer/Sealer Odor Encapsulant User Manual

Model: Formula 538

1. Introducció

This manual provides instructions for the proper use and application of Sentinel Formula 538 Smoke & Odor Primer/Sealer Odor Encapsulant. Sentinel Formula 538 is a professional-grade, low-odor, fast-drying sealer designed to encapsulate and trap odors commonly found in restoration projects, such as smoke and other persistent smells. It is intended for use after affected areas have been thoroughly cleaned and treated with appropriate odor counteractants like Sentinel 531 or Sentinel 522.

Sentinel Formula 538 Clear 5 Gallon and 1 Gallon containers

Figura 1: Sentinel Formula 538 Clear Odor Encapsulant in 5-gallon and 1-gallon containers. This product is designed to seal and trap odors on various surfaces.

2. Informació de seguretat

Always read and understand the Safety Data Sheet (SDS) before using this product. Adhere to all local, state, and federal regulations.

  • Ventilació: Ensure adequate ventilation during application and drying. Use respiratory protection if ventilation is insufficient.
  • Equips de protecció individual (EPI): Wear appropriate PPE, including safety glasses, chemical-resistant gloves, and protective clothing, to prevent skin and eye contact.
  • Inflamabilitat: This product is oil-based. Keep away from open flames, sparks, and other ignition sources. Do not smoke while using.
  • Ingestió: No ingerir. En cas d'ingestió, demani atenció mèdica immediata.
  • Skin/Eye Contact: In case of contact, flush thoroughly with water for at least 15 minutes. If irritation persists, seek medical attention.
  • Nens i animals de companyia: Mantenir fora de l'abast dels nens i mascotes.

3. Preparació

3.1 Preparació de la superfície

For optimal performance, surfaces must be clean, dry, and free of loose debris, dirt, grease, oil, and other contaminants. It is highly recommended to clean and treat affected areas with Sentinel 531 Smoke & Odor Counteractant or Sentinel 522 Smoke & Odor Cleaner & Destroyer prior to applying Formula 538.

  • Remove any loose or peeling paint.
  • Repair any structural damage to the surface.
  • Ensure the surface is completely dry before application.

3.2 Condicions ambientals

Apply in temperatures between 50°F (10°C) and 90°F (32°C). Relative humidity should be below 85%.

3.3 Preparació del producte

Stir the product thoroughly before use and periodically during application to ensure uniform consistency.

4. Aplicació

4.1 Application Methods

Sentinel Formula 538 can be applied using a brush, roller, or airless sprayer.

  • Raspall: Use a high-quality synthetic or natural bristle brush.
  • Corró: Use a short-nap roller cover (3/8" to 1/2") for smooth to semi-smooth surfaces.
  • Polvoritzador sense aire: Consult sprayer manufacturer's recommendations for tip size and pressure settings. Typically, a 0.015-0.019 inch tip with 2000-2500 PSI is suitable.

4.2 Cobertura

Expected coverage is approximately 1750-2000 square feet per gallon, depending on surface porosity and application method.

4.3 Number of Coats

A single coat is often sufficient for odor encapsulation. For heavily stained or severely odorous surfaces, a second coat may be applied after the first coat has dried to the touch.

5. Drying and Curing

  • Touch Dry: Approximately 30-60 minutes under normal conditions (70°F / 21°C, 50% relative humidity).
  • Temps de repintat: If a second coat is needed, allow 2-4 hours before recoating.
  • Curació completa: Full cure and maximum odor encapsulation properties are achieved within 24-48 hours.

Drying times may vary based on temperature, humidity, and film thickness.

6. Cleanup

Clean tools and equipment immediately after use with mineral spirits or paint thinner. Dispose of waste materials in accordance with local regulations.

7. Emmagatzematge

Store Sentinel Formula 538 in its original, tightly sealed container in a cool, dry, well-ventilated area. Protect from freezing and extreme heat. Keep away from ignition sources.

8. Solució De Problemes

ProblemaCausa possibleSolució
Odor persists after applicationInadequate surface cleaning; insufficient product application; severe odor source.Ensure thorough cleaning and pre-treatment with Sentinel 531/522. Apply a second coat of Formula 538. Identify and remove the primary odor source if possible.
Mala adherènciaSurface not clean or dry; incompatible previous coating.Ensure proper surface preparation. Test a small area for compatibility before full application.
Slow drying timeHigh humidity; low temperature; excessive film thickness.Improve ventilation. Increase room temperature. Apply thinner coats.

9. Especificacions

  • Marca: Sentinella
  • Nom del model: Fórmula 538
  • Color: Clar
  • Tipus d'acabat: Mat
  • Volum de l'article: 5 Gallons (640.0 Fluid Ounces)
  • Característica especial: Fast-Drying, Low Odor
  • Tipus de pintura: Oli
  • Usos específics per al producte: Interior/Exterior
  • Recomanació de superfície: General Surfaces
  • Cobertura: 1750-2000 sq ft/gallon
  • Nivell de resistència a l'aigua: Resistent a l'aigua

10. Garantia i Suport

Sentinel products are manufactured to high-quality standards. For specific warranty information or technical support, please contact Sentinel customer service directly. Contact details can typically be found on the product label or the manufacturer's official weblloc.

Per obtenir més ajuda, visiteu el Sentinel Brand Store on Amazon.

© 2023 Sentinel. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.