Crivit 3D Sensor Pedometer Instruction Manual

Introducció

This manual provides essential information for the proper use and maintenance of your Crivit 3D Sensor Pedometer, Model 307012. This device is designed to track your physical activity, including steps, distance, and calories burned, using advanced 3D sensor technology. Please read these instructions carefully before using the pedometer to ensure optimal performance and longevity.

Característiques

• 3D Sensor Technology: Allows for accurate step counting regardless of placement (e.g., pocket, keychain).
• Pantalla multifunció: Shows number of steps, distance, duration, speed, calorie consumption, fat burn, temperature, and current time.
• Memòria de 7 dies: Stores activity data for the past seven days.
• Configuració personalitzada: Individual adjustment for body height, weight, and stride length for improved accuracy.
• Pantalla LCD retroil·luminada: Proporciona una visibilitat clara en diverses condicions d'il·luminació.
• Attachment Clip: Per a un transport segur i còmode.
• Bateria inclosa: Operates with one CR2032 3V battery.

Producte acabatview

Image: The Crivit 3D Sensor Pedometer, featuring a red casing, an LCD screen, and an integrated clip for attachment. The display shows numerical data.

Configuració

1. Instal·lació de la bateria

1. Localitza el compartiment de la bateria a la part posterior del podòmetre.
2. Use a small coin or screwdriver to open the battery cover.
3. Insert one CR2032 3V battery with the positive (+) side facing up.
4. Torneu a col·locar la tapa de la bateria i assegureu-la.

2. Configuració inicial

Upon first use or after battery replacement, you will need to set your personal data for accurate tracking.

1. Configuració de l'hora: Follow the on-screen prompts to set the current time (12-hour or 24-hour format).
2. Selecció d'unitats: Choose between metric (cm/kg) or imperial (inches/lbs) units.
3. Alçada: Introduïu la vostra alçada.
4. Pes: Enter your body weight.
5. Longitud del pas: Measure and enter your average stride length. This can be estimated by walking 10 steps, measuring the total distance, and dividing by 10.
6. Confirm all settings to save.

Instruccions de funcionament

1. Encendre/apagar

• The pedometer typically powers on automatically when activity is detected or a button is pressed.
• To conserve battery, the device may enter a sleep mode after a period of inactivity. Press any button to wake it up.

2. Navigating Display Modes

Use the mode button (usually labeled 'MODE' or similar) to cycle through different display screens:

• Passos: Displays the total number of steps taken for the current day.
• Distància: Shows the total distance covered.
• Calories: Indica les calories cremades estimades.
• Durada: Displays the active time.
• Velocitat: Shows your average speed.
• Crema de greixos: Displays an estimate of fat burned.
• Temperatura: Mostra la temperatura ambient.
• Hora: Mostra l'hora actual.

3. Resetting Daily Data

To reset the daily activity data (steps, distance, calories) to zero, typically press and hold the 'RESET' button for a few seconds while on the main display screen. Refer to the specific button layout on your device.

4. Accessing 7-Day Memory

The pedometer stores data for the past seven days. Use the 'MEMORY' or 'HISTORY' button (if available) to review previous days' activity. The display will typically show the date and the corresponding activity data.

Manteniment

Neteja

Wipe the pedometer with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Avoid submerging the pedometer in water.

Canvi de bateria

When the battery indicator appears low or the display becomes dim, replace the CR2032 3V battery following the installation steps in the 'Setup' section. Dispose of used batteries responsibly according to local regulations.

Emmagatzematge

Store the pedometer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Resolució de problemes

• Pedometer not counting steps:
  - Ensure the battery is correctly installed and charged.
  - Check if the device is securely attached or placed in a pocket where movement can be detected.
  - Verify that personal settings (stride length, height) are correctly entered.
• La pantalla està en blanc o té poca llum:
  - Replace the battery.
  - Ensure the battery is inserted with correct polarity.
• Lectures inexactes:
  - Re-enter your personal settings (height, weight, stride length).
  - Ensure the pedometer is not subjected to excessive shaking or vibrations that are not related to walking.
• Botons que no responen:
  - Try removing and reinserting the battery to perform a soft reset.
  - Ensure the buttons are not obstructed.

Especificacions

Garantia i Suport

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Crivit weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.