1. Introducció
This instruction manual provides detailed information for the proper installation, operation, and maintenance of your maXpeedingrods 19-Row AN10 Universal Oil Cooler Kit. Please read this manual thoroughly before installation and use to ensure safe and efficient performance. Keep this manual for future reference.
Figura 1.1: Mésview of the maXpeedingrods 19-Row AN10 Universal Oil Cooler Kit, highlighting its compact design and AN10 fittings.
2. Producte acabatview
2.1. Components inclosos
The maXpeedingrods 19-Row AN10 Universal Oil Cooler Kit includes the following components:
- 1 x 19-Row Oil Cooler
- 2 x Flexible Steel Braided Hoses (1 meter each)
- 1 x Adapter Flange (color may vary, blue or silver)
- 1 x Mounting Adapter / Threaded Adapter (¾" 16 UNF)
- O-Rings (quantity as supplied)
Figure 2.1: Flexible steel braided hoses and O-rings. The kit includes two hoses, each 1 meter long, and O-rings for sealing connections. Note: Image shows hoses of 1.4m and 1.6m, but product description specifies 2x1m.
Figure 2.2: AN10 Oil Filter Sandwich Adapter (blue) and two threaded adapters (silver) for installation.
2.2. Especificacions del producte
- Número de model: RD65
- Files: 19
- Mida d'entrada/sortida: AN-10
- Threaded Adapter: M20 x 1.5 & 3/4 x 16 UNF
- Oil Filter Screw Diameter: 75 mm
- Oil Cooler Dimensions (L x H x D, external with bracket): Aproximadament 33 cm x 14.5 cm x 5 cm
- Pressió de prova: 35 MPa
- Burst Pression: 35 MPa
- Capacitat d'oli: 0.7 l/min
- Engine Oil Temperature Reduction: Up to approximately 30 °C
- Pes de l'article: 3.75 quilos
- País d'origen: Xina
Figure 2.3: Oil cooler dimensions. The cooler measures 32.7 cm in length, 16 cm in height, and 5 cm in depth, with AN10 fittings.
Figure 2.4: Summary of technical data, including the number of rows, test and burst pressures, oil capacity, and body size.
3. Informació de seguretat
Always prioritize safety during installation and operation. Improper installation can lead to oil leaks, engine damage, or personal injury. If you are unsure about any step, consult a qualified mechanic.
- Assegureu-vos que el motor estigui fred abans de començar la instal·lació.
- Disconnect the vehicle's battery to prevent accidental starting.
- Utilitzeu l'equip de protecció individual (EPI) adequat, incloent-hi guants i protecció ocular.
- Assegureu-vos que totes les connexions estiguin ben ajustades i segures per evitar fuites.
- Check for oil leaks after installation and before driving.
- Do not modify the components of this kit.
4. Configuració i instal·lació
This section outlines the general steps for installing the maXpeedingrods 19-Row AN10 Universal Oil Cooler Kit. Specific vehicle applications may vary. A thermostat is not included with this kit.
- Preparar el vehicle: Aparqueu el vehicle en una superfície plana i activeu el fre d'estacionament. Deixeu que el motor es refredi completament. Desconnecteu el terminal negatiu de la bateria.
- Drenar l'oli del motor: Escorreu l'oli del motor en un recipient adequat.
- Remove Oil Filter: Carefully remove the existing oil filter.
- Install Sandwich Plate Adapter:
- Thread the appropriate threaded adapter (M20 x 1.5 or 3/4 x 16 UNF) into the engine block where the oil filter was located.
- Place an O-ring onto the AN10 oil filter sandwich adapter.
- Mount the sandwich adapter onto the threaded adapter, ensuring it is flush and securely tightened. The oil filter screw diameter is 75 mm.
- Install a new oil filter onto the sandwich adapter.
- Mount Oil Cooler:
- Select a suitable location for the oil cooler, ensuring adequate airflow and clearance from moving parts or hot components.
- Securely mount the oil cooler using the provided bracket or a custom mounting solution. The cooler dimensions are approximately 33 cm x 14.5 cm x 5 cm.
- Connecteu les mànegues:
- Attach the flexible steel braided hoses to the AN-10 fittings on the sandwich plate adapter and the oil cooler.
- Ensure all AN-10 connections are tightened properly to prevent leaks. Do not overtighten.
- Route the hoses away from hot exhaust components, sharp edges, and moving parts. Use hose clamps or ties if necessary to secure them.
- Reomplir d'oli de motor: Refill the engine with the recommended amount and type of engine oil.
- Initial Start-up and Leak Check:
- Torneu a connectar la bateria.
- Start the engine and let it idle. Immediately check for any oil leaks around the oil cooler, hoses, and sandwich plate adapter.
- If leaks are detected, shut off the engine and rectify the connections.
- Allow the engine to reach operating temperature and re-check for leaks.
- Comprovar el nivell d'oli: After the engine has cooled, re-check the engine oil level and top up if necessary.
Figura 4.1: Primer pla views of the oil cooler's AN10 fittings and hose connection points, illustrating the components involved in the installation.
5. Instruccions de funcionament
Once installed, the oil cooler operates automatically to reduce engine oil temperature. No specific user interaction is required during normal operation.
- The oil cooler is designed to maintain optimal engine oil temperatures, especially under high-stress conditions like track driving or heavy towing.
- Regularly monitor your engine oil temperature gauge (if equipped) to ensure proper cooling performance.
- The kit is designed to reduce engine oil temperature by up to approximately 30 °C.
6. Manteniment
Proper maintenance ensures the longevity and effectiveness of your oil cooler kit.
- Inspecció periòdica: Periodically inspect all hoses, fittings, and the oil cooler for signs of wear, damage, or leaks. Check for any loose connections.
- Neteja: Keep the oil cooler fins clean from debris, dirt, and insects to ensure maximum cooling efficiency. Use compressed air or a soft brush to gently clean the fins.
- Estat de la mànega: Check the flexible steel braided hoses for any fraying, kinks, or hardening. Replace them if any damage is observed.
- Canvis d'oli: Follow your vehicle manufacturer's recommended oil change intervals. The oil cooler does not alter these requirements.
7. Solució De Problemes
This section addresses common issues you might encounter with your oil cooler kit.
| Problema | Causa possible | Solució |
|---|---|---|
| Fuga d’oli | Loose AN-10 fittings, damaged O-rings, improperly seated sandwich plate or oil filter. | Tighten all AN-10 fittings. Inspect and replace O-rings if damaged. Ensure sandwich plate and oil filter are correctly installed and tightened. |
| Refrigeració insuficient | Blocked oil cooler fins, improper mounting location (lack of airflow), air in the system. | Clean oil cooler fins. Relocate cooler to an area with better airflow if possible. Ensure proper bleeding of the oil system after installation. |
| Hose Damage/Wear | Friction against other components, excessive heat exposure, improper routing. | Inspect hose routing and secure away from abrasive surfaces or heat sources. Replace damaged hoses immediately. |
Si trobeu problemes que no figuren aquí o si les solucions suggerides no resolen el problema, poseu-vos en contacte amb l'atenció al client.
8. Garantia i Suport
maXpeedingrods products are designed for quality and performance. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official maXpeedingrods weblloc.
For technical assistance, parts inquiries, or warranty claims, please contact maXpeedingrods customer support through their official channels. When contacting support, please have your product model number (RD65) and purchase information readily available.
Fabricant: maXpeedingrods
Weblloc: www.maxpeedingrods.com (Please verify the actual support weblloc)