Autopilot APCET2 Advanced Day & Night Cooling or Heating Thermostat User Manual

1. Introducció

The Autopilot APCET2 is a versatile temperature controller designed for both cooling and heating applications. It features automatic day and night set points, detected by a built-in photocell, allowing for precise temperature management. Easy-to-use knobs facilitate setting adjustments, and a Memory-lock feature ensures consistent performance by preventing accidental changes to set points.

Característiques principals:

• Controls heating or cooling equipment with both day/night set points.
• Includes a 20-foot remote precision temperature sensor.
• Temperature control differential of +/- 3°F.
• Built-in photocell for automatic day/night detection.
• Temperature control range: 50°F–100°F (10°C–38°C).
• Electric power source.

2. Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans de fer servir aquest dispositiu. Si no segueix aquestes instruccions, es poden produir descàrregues elèctriques, incendis o lesions greus.

• Només per a ús interior: This device is intended for indoor use in dry locations. Do not expose to water or high humidity.
• Valoració elèctrica: Ensure the connected device's electrical rating does not exceed the thermostat's maximum load (1800 watts, 15 amps at 120V AC).
• Connexió a terra adequada: Always plug the thermostat into a properly grounded 3-prong outlet.
• Eviteu la sobrecàrrega: Do not plug multiple high-power devices into the thermostat using a power strip or adapter.
• Col·locació del sensor: Position the temperature sensor away from direct heat sources, cold drafts, or direct sunlight to ensure accurate readings.
• Neteja: Disconnect power before cleaning. Use a dry cloth; do not use liquid cleaners.
• Nens i animals de companyia: Mantingueu el dispositiu fora de l'abast dels nens i les mascotes.

3. Producte acabatview

The Autopilot APCET2 thermostat features a user-friendly design with clearly labeled controls and indicators.

Davant View:

Figura 3.1: Davant view of the Autopilot APCET2 thermostat. This image displays the main control panel, including the two temperature setting knobs, the day/night mode switch, the heating/cooling mode switch, and the integrated power outlet for connecting your device. The "ON" and "POWER" indicator lights are also visible.

• Day/Night Temperature Knobs: Two separate knobs for setting desired temperatures for day and night cycles.
• Day/Night Mode Switch: Toggles between 24-hour operation or automatic day/night detection via photocell.
• Heating/Cooling Mode Switch: Selects whether the thermostat controls a heating or cooling device.
• Presa de corrent integrada: Where the controlled device is plugged in.
• Llum indicador d'alimentació: Illuminates when the unit is receiving power.
• Llum indicadora de sortida: Illuminates when power is being supplied to the connected device.

Enrere View:

Figura 3.2: Enrere view of the Autopilot APCET2 thermostat. This image shows the standard 3-prong power plug for connecting the thermostat to a wall outlet, along with the screws for potential wall mounting.

• Endoll d'alimentació: Standard 3-prong plug for connecting to a 120V AC wall outlet.
• Forats de muntatge: Per a muntatge opcional a la paret.

Dimensions:

Figura 3.3: Dimensions of the Autopilot APCET2 thermostat. The image indicates the device measures approximately 3 inches deep, 2.25 inches wide, and 5 inches high.

4. Instruccions de configuració

1. Desempaquetar el dispositiu: Carefully remove the Autopilot APCET2 thermostat and its components from the packaging.
2. Connect the Temperature Sensor: Plug the 20-foot remote precision temperature sensor into the designated port on the side of the thermostat. Ensure a secure connection.
3. Col·loca el sensor: Place the temperature sensor in the area where you want to monitor and control the temperature. Avoid placing it in direct sunlight, near heat sources, or in drafts, as this can affect accuracy.
4. Plug in the Thermostat: Insert the 3-prong plug of the Autopilot APCET2 thermostat into a standard 120V AC grounded wall outlet. The Power indicator light should illuminate.
5. Connecteu el vostre dispositiu: Plug the heating or cooling device you wish to control into the integrated power outlet on the front of the thermostat.
6. Comprovació inicial: Ensure all connections are secure before proceeding to operation.

5. Instruccions de funcionament

The Autopilot APCET2 offers flexible temperature control with day and night settings and heating/cooling modes.

5.1 Selecting Operating Mode (Heating or Cooling)

• Localitza el Heating/Cooling Mode Switch on the front panel (typically marked with flame and snowflake icons).
• Feu lliscar l'interruptor cap a icona de flama per Mode de calefacció. In this mode, the connected device will turn ON when the temperature drops below the set point and turn OFF when it rises above the set point (considering the +/- 3°F differential).
• Feu lliscar l'interruptor cap a icona de floc de neu per Mode de refrigeració. In this mode, the connected device will turn ON when the temperature rises above the set point and turn OFF when it drops below the set point (considering the +/- 3°F differential).

5.2 Setting Day and Night Temperatures

The thermostat allows for distinct day and night temperature settings.

1. Day Temperature Setting: Utilitza el upper knob (associated with the sun icon) to set your desired daytime temperature. Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The range is 50°F–100°F (10°C–38°C).
2. Night Temperature Setting: Utilitza el lower knob (associated with the moon icon) to set your desired nighttime temperature. Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it. The range is 50°F–100°F (10°C–38°C).

5.3 Day/Night Detection Mode

The thermostat can automatically switch between day and night settings using its built-in photocell.

• Localitza el Day/Night Mode Switch (typically marked with a 24h icon and sun/moon icons).
• Feu lliscar l'interruptor cap a sun/moon icon per Detecció automàtica dia/nit. The built-in photocell will detect ambient light levels and automatically switch between your set day and night temperatures.
• Feu lliscar l'interruptor cap a 24h icon per 24-Hour Operation. In this mode, the thermostat will continuously use the Configuració de la temperatura diürna, regardless of light conditions.

5.4 Memory-Lock Feature

The Memory-lock feature prevents accidental changes to your set points.

• A pany the settings, slide the small switch next to the padlock icon to the posició bloquejada. This will prevent the temperature knobs from being accidentally adjusted.
• A desbloquejar the settings, slide the switch to the posició desbloquejada.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your Autopilot APCET2 thermostat.

• Neteja: Disconnect the thermostat from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Cura del sensor: Keep the temperature sensor clean and free from dust or debris. Ensure the sensor cable is not pinched or damaged.
• Emmagatzematge: If storing the device for an extended period, disconnect it from power, clean it, and store it in a cool, dry place.

7. Solució De Problemes

If you encounter issues with your Autopilot APCET2 thermostat, refer to the following common problems and solutions:

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.

8. Especificacions

9. Garantia i atenció al client

For warranty information or technical assistance, please contact Autopilot customer support. Refer to the product packaging or the official Autopilot weblloc web per obtenir les dades de contacte més actualitzades.

When contacting support, please have your product model number (APCET2) and purchase information readily available.