Manual d'instruccions de la llum de taller Maxlite SL-48231-50

Producte acabatview

The Maxlite Shop Light SL-48231-50 is a 48-inch, 23W, 120V LED shop light designed for various indoor applications such as garages, workshops, and basements. It provides instant full brightness with a 5000K daylight color temperature and is ENERGY STAR certified for energy efficiency. This fixture features a built-in on/off pull chain, a 5ft power cord with a 120V plug, and is linkable with up to 4 units for extended lighting coverage.

Image: Maxlite Shop Light SL-48231-50, a white 48-inch LED fixture with a pull chain and power outlet on one end.

Informació de seguretat

Always read and follow all safety instructions before installation and operation. Disconnect power before servicing. This product is intended for indoor use only. Do not modify the fixture or use it for purposes other than its intended use.

• Ensure the power supply is turned off at the circuit breaker before installation.
• Do not install near heat sources or in wet locations.
• Use appropriate mounting hardware for your installation surface.
• Do not exceed the maximum linkable units (4 units).

Configuració i instal·lació

The Maxlite Shop Light SL-48231-50 is designed for semi-flush ceiling mount installation. No assembly is required for the light fixture itself.

Contingut del paquet:

• 1 x Maxlite Shop Light SL-48231-50
• Ferramenteria de muntatge (ganxos, cadenes, cargols)
• 5ft power cord with 120V plug

Passos d'instal·lació:

1. Prepareu l'àrea d'instal·lació: Choose a suitable location for mounting, such as a garage, workshop, or basement. Ensure the surface can support the weight of the fixture (approximately 15.5 ounces).
2. Apagueu l'alimentació: Before beginning any electrical work, turn off the power to the installation area at the main circuit breaker.
3. Muntar l'aparell:
   • Mark the desired mounting points on the ceiling or wall.
   • Install the provided mounting hardware (e.g., ceiling hooks or screws) securely into the marked points.
   • Hang the shop light using the installed hardware. The fixture has screw holes for flush mounting.
4. Connectar l'alimentació: Plug the 5ft power cord into a standard 120V electrical outlet.
5. Link Multiple Units (Optional): If linking multiple units, connect the linking cable from the output end of one fixture to the input end of the next. Do not exceed 4 linked units.
6. Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions estiguin ben connectades, torneu a engegar l'alimentació a l'interruptor.

Instruccions de funcionament

The Maxlite Shop Light SL-48231-50 is simple to operate using its integrated pull chain.

• Encesa: Gently pull the chain extending from the fixture once to turn the light on.
• Apagat: Gently pull the chain again to turn the light off.

The light provides instant full brightness upon activation.

Manteniment

The Maxlite Shop Light SL-448231-50 requires minimal maintenance due to its LED technology.

• Neteja: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
• Substitució de bombetes: This fixture uses integrated LED lighting and does not require bulb replacement. If the LEDs fail, the entire fixture typically needs to be replaced.
• Inspecció: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

Resolució de problemes

Especificacions

Garantia i Suport

Informació de la garantia:

This Maxlite product comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or visit the official Maxlite website. The provided data states "Warranty Description: N/a.", indicating general warranty information is not detailed here, but a limited warranty is offered.

Atenció al client:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Maxlite customer support. Visit the official Maxlite weblloc web per obtenir la informació de contacte més actualitzada.

You can also visit the Maxlite store on Amazon for more information: Maxlite Amazon Store