1. Introducció
Thank you for choosing the Memphis Audio VIV1100.1 SixFive Series Mono Subwoofer Amplificador. Això amplifier is designed to deliver powerful and clear bass performance for your car audio system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your ampmés viu.
2. Informació de seguretat
WARNING: Improper installation or use of this product can result in serious injury or death. Read and understand all instructions before installing or using this product.
- Desconnecteu sempre el terminal negatiu de la bateria del vehicle abans de començar qualsevol instal·lació.
- Assegureu-vos que tot el cablejat estigui correctament encaminat i fixat per evitar danys causats per peces mòbils o vores afilades.
- Feu servir un cablejat del calibre adequat per a les connexions d'alimentació, terra i altaveus, tal com s'especifica en aquest manual.
- No muntis el amplificador en llocs exposats a la llum solar directa, a la calor excessiva, a la humitat o a la pols.
- No feu servir mai el amplifier with damaged wiring or if it emits smoke or unusual odors. Immediately disconnect power and consult a qualified technician.
- Es recomana una instal·lació professional per a un rendiment i una seguretat òptims.
3. Contingut del paquet
Comproveu que el vostre paquet contingui els elements següents:
- Memphis Audio VIV1100.1 Mono Subwoofer Ampmés viu
- Maquinari de muntatge (cargols)
- Manual del propietari (aquest document)
- Remote Bass Knob (if included with your model)
4. Configuració i instal·lació
4.1 Muntatge del Ampmés viu
Trieu una ubicació de muntatge seca, ben ventilada i allunyada de fonts de calor directes. Assegureu-vos que hi hagi prou flux d'aire al voltant amplifier for cooling. Secure the amplifier firmly using the provided mounting hardware.
4.2 Connexions de cablejat
All wiring connections must be secure and properly insulated. Refer to the diagrams below for correct wiring procedures.
Figura 1: Connexions del panell posterior. This image displays the rear panel of the VIV1100.1 amplifier, highlighting the power input terminals (B+, GND, REM), RCA input/output jacks, and speaker output terminals. Also visible are the 'AUTO TURN ON' switch, 'INPUT LEVEL' switch, and 'PROTECT' indicator.
4.2.1 Connexions d'alimentació
- B+ (alimentació de 12 V): Connect a heavy-gauge power cable (e.g., 4 AWG or larger, depending on installation) directly from the positive terminal of the vehicle's battery. Install an appropriate fuse (not supplied) within 18 inches of the battery.
- GND (terra): Connect a heavy-gauge ground cable of the same size as the power cable to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical connection.
- REM (encesa remota): Connect a 18-gauge wire from the remote turn-on output of your head unit to this terminal. This wire turns the ampengegueu i apagueu l'activador amb la unitat principal.
4.2.2 Connexions d'entrada
Connecteu les sortides RCA de la unitat principal a amplifier's RCA INPUT jacks. If your head unit does not have RCA outputs, use the high-level input option if available (refer to the 'INPUT LEVEL' switch).
4.2.3 Connexions d'altaveus
Connecteu el(s) subwoofer(s) al amplifier's SPEAKER terminals. Ensure correct polarity (+ to + and - to -). This is a mono amplifier, designed for a single subwoofer or multiple subwoofers wired to a single channel. Refer to your subwoofer's specifications for impedance matching.
4.3 Amplifier Controls and Adjustments
The VIV1100.1 amplifier features various controls for fine-tuning your audio system. Adjust these settings carefully to achieve optimal sound quality.
Figure 2: Top Panel Controls. This image illustrates the top control panel of the VIV1100.1 amplifier, detailing the adjustable knobs for GAIN, SUB-SONIC filter, X-OVER (low-pass crossover), CENTER FREQ, Q, BASS BOOST, and the LED COLOR selector.
- GUANY: Ajusta la sensibilitat d'entrada del amplifier to match the output of your head unit. Start with the gain at minimum and slowly increase until desired volume is reached without distortion.
- SUB-SONIC Filter (24dB Per Octave): Filters out extremely low frequencies that are inaudible and can damage subwoofers. Set this just below the lowest frequency your subwoofer can reproduce effectively.
- X-OVER (Low Pass Crossover - 48dB Per Octave): Controls the upper frequency limit of the amplifier's output. Set this to allow only bass frequencies to pass to the subwoofer.
- CENTER FREQ & Q: These controls are part of the M-Equalization™ system, allowing for precise tuning of a specific frequency band. Adjust the CENTER FREQ to select the frequency and Q to adjust the bandwidth of the boost/cut.
- INTENSIFICACIÓ DELS SONS MÉS GREUS: Provides an adjustable boost to bass frequencies. Use sparingly to avoid distortion and potential speaker damage.
- COLOR DEL LED: Selects the color of the amplifier's LED panel. This amplifier features 7 selectable colors.
5. Instruccions de funcionament
Un cop instal·lat i configurat correctament, el amplifier will turn on automatically when your head unit is powered on (via the remote turn-on wire or DC offset sensing if 'AUTO TURN ON' is enabled). The LED indicator will illuminate to show operational status.
- Encès: El amplifier will power on when the remote turn-on signal is received.
- Indicador LED: The LED panel will display the selected color during normal operation. If the amplifier enters protection mode, the LED may change color or turn off (refer to Troubleshooting).
- Control de volum: Adjust the overall system volume using your head unit. The amplifier's gain control should be set once and not used as a volume control.
6. Manteniment
The Memphis Audio VIV1100.1 amplifier requires minimal maintenance. Follow these guidelines to ensure continued performance:
- Neteja: Netegeu periòdicament el ampl'exterior del purificador amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
- Inspecció: Regularly check all wiring connections for tightness and signs of corrosion or damage. Ensure adequate ventilation around the ampmés viu.
- Evitar obstruccions: No col·loqueu objectes a sobre amplifier that could block airflow to the heat sinks.
7. Solució De Problemes
Si tens problemes amb el teu amplifier, consult the following troubleshooting guide before contacting support.
| Problema | Causa possible | Solució |
|---|---|---|
| No Power / No LED | Blown fuse, poor power/ground connection, no remote turn-on signal. | Check inline fuse near battery. Verify power, ground, and remote wire connections. Ensure head unit is on. |
| Protection Mode (LED changes/off) | Sobreescalfament, curtcircuit d'altaveu, impedància massa baixa, desplaçament de CC. | Permetre amplifier to cool. Check speaker wiring for shorts. Verify speaker impedance is within amplifier's limits. Disconnect inputs to check for DC offset. |
| Sense sortida de so | No hi ha senyal d'entrada, configuració de guany incorrecta, cables d'altaveu desconnectats. | Check RCA input cables. Adjust gain. Verify speaker connections. Ensure head unit is playing audio. |
| So distorsionat | Gain set too high, improper crossover settings, damaged speaker. | Reduce gain. Adjust crossover and bass boost settings. Test with a different speaker if possible. |
| Engine Noise / Whine | Poor ground connection, RCA cables routed near power wires, ground loop. | Assegureu-vos amplifier and head unit have solid, separate ground points. Reroute RCA cables away from power wires. Use a ground loop isolator if necessary. |
8. Especificacions
The following are key specifications for the Memphis Audio VIV1100.1 SixFive Series Mono Subwoofer Ampmés viu:
- Número de model: VIV1101 0 (VIV1100.1)
- Potència de sortida: 1,100 watts RMS x 1 at 1 ohm (typical)
- Filtre subsònic: 24dB Per Octave
- Crossover de pas baix: 48dB Per Octave
- Processament del senyal digital: Sí
- Acabat: Angel Hair Anodized
- Panell LED: 7 Color Selectable Color Changing LED Panel
- Tipus de muntatge: Door mount (refer to installation guidelines for secure mounting)
- UPC: 841992149113
- Data de primera disponibilitat: 23 de juliol de 2020
9. Garantia i assistència
9.1 Informació de la garantia
This Memphis Audio VIV1100.1 amplifier ve amb a Garantia limitada de 90 dies. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
9.2 Atenció al client
For technical assistance, warranty service, or questions regarding your Memphis Audio VIV1100.1 amplifier, please contact your authorized Memphis Audio dealer or visit the official Memphis Audio website for support resources. When contacting support, please have your product model number and purchase information readily available.