FLOMEC TM10NQ9GMA

FLOMEC TM Series Water Meter (TM10NQ9GMA) User Manual

Model: TM10NQ9GMA | 1 inch FNPT

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your FLOMEC TM Series Water Meter, model TM10NQ9GMA. This meter is designed for accurate measurement of liquid flow in various applications, including water processing and irrigation. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Informació de seguretat

  • Utilitzeu sempre equips de protecció individual (EPI) adequats durant la instal·lació i el manteniment.
  • Ensure the system is depressurized and drained before attempting any installation or service.
  • Do not exceed the specified pressure and temperature ratings of the meter.
  • Verify proper sealing of all connections to prevent leaks.
  • Keep batteries out of reach of children. Dispose of batteries according to local regulations.

Producte acabatview

The FLOMEC TM Series Water Meter is an economical and robust solution for liquid flow measurement. It features a durable schedule 80 PVC housing and a local display that provides real-time flow rate, accumulated total, and a resettable total. The meter supports three engineering units: Gallons, Liters, and Cubic Feet. It is factory-calibrated and battery-operated for ease of use.

Diagram of FLOMEC TM Series Water Meter display with labeled components
Figura 1: Labeled diagram of the FLOMEC TM Series Water Meter display, indicating the Rate button, Total button, Flow indicator, Units, Batch indicator, Batch Total, Cumulative Total, Flowrate, Floating Decimal Point (3 places), Factory Calibration Indicator, Total Spillover Indicator (X10 / X100), and Total Indicator.

Configuració i instal·lació

The TM10NQ9GMA model features 1-inch Female NPT fittings for straightforward integration into your piping system. Proper installation is crucial for accurate readings and long-term performance.

Passos d'instal·lació:

  1. Prepare the Piping: Ensure the pipe section where the meter will be installed is clean and free of debris. The meter requires a straight run of pipe before and after for optimal accuracy.
  2. Orient the Meter: Observe the flow direction arrow on the meter body. Install the meter so that the arrow aligns with the direction of liquid flow in your system.
  3. Connectar accessoris: Apply appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 1-inch Male NPT threads of your piping. Carefully thread the meter onto the pipe fittings. Do not overtighten, as this can damage the PVC housing.
  4. Comproveu si hi ha fuites: Slowly pressurize the system and inspect all connections for leaks. Tighten as necessary.
  5. Instal·lació de la bateria: The meter comes with two AAA alkaline batteries pre-installed. If replacement is needed, refer to the Maintenance section.
FLOMEC TM Series Water Meter with 1 inch FNPT fittings
Figura 2: The FLOMEC TM Series Water Meter, showing its compact design and 1-inch FNPT connections.
FLOMEC TM Series Water Meter installed in a pipe
Figura 3: Un example of the FLOMEC TM Series Water Meter properly installed in a pipeline, demonstrating correct orientation with the flow.

Instruccions de funcionament

The FLOMEC TM Series Water Meter is designed for simple operation with its intuitive display and two-button interface.

Funcions de visualització:

  • Caudal: Shows the instantaneous flow rate of the liquid.
  • Total general: Displays the cumulative total volume of liquid that has passed through the meter since its initial installation. This total is non-resettable.
  • Total reiniciable: Displays a total volume that can be reset for batching or specific measurement periods.

Funcions del botó:

  • RATE Button: Press to cycle through display modes, typically showing flow rate.
  • TOTAL Button: Press to cycle through totalizer modes (Grand Total, Resettable Total). Hold to reset the Resettable Total.

Canvi d'unitats:

The meter supports Gallons, Liters, and Cubic Feet. Refer to the detailed programming instructions in the full product manual (if available) for specific steps on how to change the displayed units. Typically, this involves a combination of button presses during power-up or a specific menu sequence.

Manteniment

Regular maintenance ensures the longevity and accuracy of your FLOMEC TM Series Water Meter.

Substitució de la bateria:

The meter operates on two AAA alkaline batteries. When the battery indicator appears on the display, it is time to replace them.

  1. Ensure the system is depressurized and the meter is accessible.
  2. Locate the battery compartment on the top of the display unit.
  3. Carefully remove the screws securing the battery cover.
  4. Remove the old AAA batteries and insert two new AAA alkaline batteries, observing correct polarity.
  5. Replace the battery cover and tighten the screws to ensure a watertight seal.
FLOMEC TM Series Water Meter with two AAA batteries shown
Figura 4: The FLOMEC TM Series Water Meter, illustrating the location of the battery compartment and the two AAA alkaline batteries required.

Neteja:

Periodically clean the exterior of the meter with a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the housing or display.

Resolució de problemes

If you encounter issues with your FLOMEC TM Series Water Meter, refer to the following common troubleshooting steps:

ProblemaCausa possibleSolució
Sense pantalla o pantalla tènuePiles gastades o baixesReplace batteries with new AAA alkaline batteries.
Lectures inexactesIncorrect installation (e.g., wrong flow direction, insufficient straight pipe run)Verify meter orientation and ensure adequate straight pipe sections before and after the meter.
No flow reading despite liquid flowObstruction in the meter or sensor issueDepressurize and inspect the meter for any blockages. If the issue persists, contact technical support.
Fuites a les connexionsImproperly sealed threads or damaged fittingsDepressurize, reapply thread sealant, and retighten connections. Inspect fittings for damage.

For issues not covered here, please contact FLOMEC customer support.

Especificacions

Detailed technical specifications for the FLOMEC TM Series Water Meter (TM10NQ9GMA).

CaracterísticaEspecificació
Número de modelTM10NQ9GMA
Tipus d'ajust1 inch Female NPT
Interval de cabal5 to 50 Gallons Per Minute (19 to 190 Liters Per Minute)
Precisió±3.0% de la lectura
Classificació de la pressió225 PSI at 73°F (pressure rating reduces with higher temperature)
Interval de temperatura de funcionamentDe 32 °F a 140 °F (de 0 °C a 60 °C)
Unitats de visualitzacióGallons, Liters, Cubic Feet
Font d'alimentació2 x piles alcalines AAA
Dimensions del paquet8.98 x 4.17 x 3.94 polzades
Pes de l'article1 lliures
FabricantGreat Plains Industries
Diagram showing dimensions and key specifications of the FLOMEC TM Series Water Meter
Figura 5: Visual representation of the FLOMEC TM Series Water Meter's dimensions and key specifications, including fitting type, flow range, accuracy, and operating temperature range.

Garantia i Suport

The FLOMEC TM Series Water Meter is manufactured by Great Plains Industries. For specific warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official FLOMEC weblloc web. Es recomana conservar el comprovant de compra per a reclamacions de garantia.

© 2025 FLOMEC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.