Infinity Reference 6001A Mono AmpManual d'usuari més viu

1. Introducció

Thank you for choosing the Infinity Reference 6001A Mono Amplificador. Això amplifier is designed to deliver powerful and clear bass to your car audio system. Featuring a Class D design for efficiency, speaker-level inputs for versatile integration, and adjustable controls like a low-pass filter, variable bass boost, and phase switch, the Reference 6001A provides excellent performance and flexibility. This manual provides essential information for proper installation, operation, and maintenance of your ampmés viu.

2. Informació de seguretat

Please read all instructions carefully before attempting installation or operation. Failure to do so may result in personal injury or damage to the amplificador o vehicle.

• Always disconnect the vehicle's negative battery terminal before beginning any installation.
• Ensure proper wiring and connections to prevent short circuits and electrical hazards.
• Muntar el ampl'extintor de forma segura en un lloc que permeti una ventilació adequada i que estigui protegit de la humitat i de la calor excessiva.
• No opereu el amplificador si ha estat danyat o exposat a l'aigua.
• Consulteu un instal·lador professional d'àudio per a cotxes si no teniu cap dubte sobre alguna part del procés d'instal·lació.
• Utilitzeu un cablejat del calibre adequat per a les connexions d'alimentació i de terra, tal com s'especifica a la secció d'instal·lació.

3. Què hi ha a la caixa

Desembaleu amb cura el contingut i assegureu-vos que hi hagi tots els elements:

• One Reference 6001A mono subwoofer car ampmés viu
• Quatre fusibles ATO 30A (2 instal·lats, 2 de recanvi)
• Two Bare wire-to-RCA adapters
• Mòdul de control de greus remot
• 16.5' Remote control cable (RJ-25 plugs on both ends)
• Two Self-tapping screws for remote (M3 x 15mm)
• Four Mounting screws (M4 x 53mm)
• Manual del propietari (aquest document)
• Two Infinity decals
• One Infinity logo badge

4. Configuració i instal·lació

Proper installation is crucial for optimal performance and safety. Follow these guidelines for setting up your Infinity Reference 6001A ampmés viu.

4.1 Muntatge del Ampmés viu

Trieu una ubicació de muntatge que sigui seca, ben ventilada i segura. Eviteu muntar el amplifier directly on carpet or in enclosed spaces without airflow. Ensure the mounting surface is strong enough to support the amppes del vidador.

Figura 1: Part superior frontal view of the Infinity Reference 6001A Mono Amplifier, showing its compact design and Infinity logo.

Figura 2: A dalt view of the Infinity Reference 6001A Mono Amplifier, highlighting its sleek, black casing.

4.2 Connexions de cablejat

Refer to the rear panel diagram for all input and output connections. Ensure all connections are tight and secure to prevent signal loss or electrical issues.

Figura 3: Rear panel of the Infinity Reference 6001A Mono Amplifier, showing power, ground, remote, speaker, RCA input, and remote control ports.

• Potència (B+): Connect to the vehicle's positive battery terminal using an appropriate gauge power cable. Install a fuse holder with a fuse (not included) within 18 inches of the battery.
• Terra (GND): Connect to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid electrical connection.
• Remot (REM): Connect to the remote turn-on output of your head unit. This turns the ampencén i apaga l'activador amb el teu estèreo.
• Speaker Output (SUB): Connect your subwoofer(s) to these terminals. Observe correct polarity (+ to + and - to -).
• RCA Input (IN L/R): Connect to the RCA pre-out outputs of your head unit. If your head unit does not have RCA outputs, use the supplied bare wire-to-RCA adapters with speaker-level inputs.
• Port de control remot: Connect the remote bass control module here using the provided RJ-25 cable.

5. Instruccions de funcionament

Un cop instal·lat, ajusteu el amplifier settings to optimize sound performance for your vehicle and subwoofer.

5.1 Ajust de guany

El control de guany coincideix amb el amplifier's input sensitivity to the output of your head unit. Start with the gain at minimum, then slowly increase it until you hear distortion, then back it off slightly. This is not a volume control.

5.2 Low-Pass Filter (LPF)

The LPF allows only frequencies below a set point to pass through to the subwoofer. Adjust this to blend the subwoofer's output seamlessly with your main speakers. A common starting point is 80-100 Hz.

5.3 Augment de baix

This control allows you to increase the bass output at a specific frequency. Use sparingly to avoid distortion and potential damage to your subwoofer.

5.4 Interrupció de fase

The phase switch (0°/180°) helps ensure that the subwoofer's output is in phase with your main speakers. Listen from the driver's seat and select the setting that provides the most impactful and cohesive bass response.

Control remot de greus 5.5

The included remote bass control module allows for convenient adjustment of the subwoofer's output level from the driver's seat. Connect it to the amplifier's remote control port and mount it in an accessible location.

6. Manteniment

La referència infinita 6001A ampEl lificador requereix un manteniment mínim per garantir un rendiment a llarg termini.

• Neteja: Netegeu periòdicament el ampl'exterior del purificador amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
• Ventilació: Assegureu-vos que el ampLes aletes de refrigeració del refrigerador no tenen obstruccions per permetre una correcta dissipació de la calor.
• Fusibles: El amplifier uses 30A ATO fuses. If a fuse blows, replace it only with a fuse of the same type and rating. Using an incorrect fuse can cause damage or fire.
• Connexions: Comproveu periòdicament totes les connexions del cablejat per verificar si estan ben ajustades i si hi ha corrosió.

7. Solució De Problemes

Si teniu problemes amb el vostre amplifier, consult this section before contacting support.

• Sense energia:
  • Check the main fuse near the battery and the fuses on the ampmés viu.
  • Verify power, ground, and remote turn-on connections are secure and have proper voltage.
• Sense so:
  • Check RCA or speaker-level input connections from the head unit.
  • Verify subwoofer connections and ensure the subwoofer is functioning correctly.
  • Comproveu ampConfiguració de guany del lifier.
• So distorsionat:
  • Redueix l'ajust de guany a la ampmés viu.
  • Check for proper LPF and bass boost settings.
  • Ensure speaker wires are not shorted or damaged.
• Ampsobreescalfament del lificador:
  • Assegureu-vos una ventilació adequada al voltant ampmés viu.
  • Check for proper impedance matching with the subwoofer(s).
  • Reduce gain or bass boost settings.

8. Especificacions

9. Garantia i Suport

Infinity products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Infinity weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

9.1 Atenció al client

If you require technical assistance or have questions not covered in this manual, please contact Infinity customer support through their official weblloc web o la informació de contacte proporcionada amb la compra.

Per a més informació, visiteu el Botiga Infinity a Amazon.