1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of the LTS LTDHIP3662W-28ISM IP Eyeball Camera. This 6-megapixel camera features a built-in microphone, 2.8mm fixed lens, True WDR 120dB, H.265+ compression, and an IR range of up to 164 feet (50 meters). It is designed for both indoor and outdoor surveillance with an IP67 weatherproof rating. Please read this manual thoroughly before using the product to ensure proper setup and functionality.
2. Contingut del paquet
Verifiqueu que tots els articles siguin presents i en bon estat en obrir el paquet. Si falta algun article o està malmès, poseu-vos en contacte amb el vostre venedor immediatament.
- LTS LTDHIP3662W-28ISM IP Eyeball Camera
- Cargols de muntatge i tacs de paret
- Connector impermeable per a cable Ethernet
- Guia d'inici ràpid (si escau)
- Plantilla de perforació (si escau)
3. Producte acabatview
The LTDHIP3662W-28ISM is a high-performance IP camera designed for reliable surveillance. It features a robust housing, advanced imaging capabilities, and flexible connectivity options.
Figura 3.1: Frontal View of the LTDHIP3662W-28ISM IP Eyeball Camera. This image displays the camera's main lens, IR illuminators, and built-in microphone, housed within its white eyeball-style casing.
Característiques principals:
- 6 Megapixel Resolution (3072x2048@20fps)
- 2.8mm Fixed Lens with 98° Horizontal FOV
- Micròfon incorporat
- True WDR 120dB for clear images in challenging lighting
- H.265+/H.265/H.264 Video Compression
- Infrared (IR) Night Vision up to 164ft (50m)
- MicroSD Card Slot (up to 128GB) for local storage
- IP67 Weatherproof Rating for outdoor use
- Power over Ethernet (PoE/ePoE) and DC 12V power options
4. Configuració i instal·lació
4.1 Precaucions de seguretat
- Assegureu-vos que l'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
- Use only approved power adapters (DC 12V) or PoE switches.
- Avoid pointing the camera directly at strong light sources.
- Do not disassemble the camera. Refer servicing to qualified personnel.
4.2 Instal·lació física
- Trieu una ubicació de muntatge: Select a location that provides the desired field of view and is within range of your network and power source. The camera is IP67 rated for outdoor use.
- Prepara la superfície: Use the provided drill template (if included) to mark the screw holes on the wall or ceiling. Drill pilot holes.
- Muntar la càmera: Secure the camera base to the mounting surface using the provided screws and wall plugs.
- Ajust de l'angle de la càmera: Loosen the adjustment screws on the camera body to position the lens for optimal coverage. Tighten the screws once the desired angle is achieved. The camera features 3-axis adjustment.
4.3 Connexió de xarxa i alimentació
The camera supports Power over Ethernet (PoE/ePoE) or a 12V DC power supply.
- Connexió Ethernet:
Figure 4.1: Standard Ethernet Cable. This image shows a blue Ethernet cable with RJ45 connectors, used for network and Power over Ethernet (PoE) connectivity.
- Connect one end of an Ethernet cable to the camera's RJ45 port.
- If using PoE, connect the other end of the Ethernet cable to a PoE-enabled switch or NVR.
- If not using PoE, connect the other end to a standard network switch/router and proceed to connect a 12V DC power adapter to the camera's power input.
- Use the provided waterproof connector for outdoor installations to protect the Ethernet connection.
- Connexió d'alimentació (si no s'utilitza PoE):
- Connect a 12V DC power adapter (not included) to the camera's power input port.
- Ensure the power source meets the camera's specifications.
4.4 Configuració inicial de la xarxa
After connecting the camera to your network, you will need to discover and activate it.
- Install SADP Tool: Download and install the SADP (Search Active Device Protocol) tool from the manufacturer's website on a computer connected to the same network as the camera.
- Descobreix la càmera: Run the SADP tool. It will automatically detect all active LTS IP devices on your local network.
- Activa la càmera: New cameras are inactive by default. Select the camera from the SADP list and set a strong password for it. This activates the camera.
- Modify IP Address (Optional): If your network requires a static IP address, you can modify it using the SADP tool. Ensure the IP address, subnet mask, and gateway are correct for your network.
- Accés via Web Navegador: Obre a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using the password you set during activation.
5. Instruccions de funcionament
5.1 Viu View
Un cop iniciada la sessió a la càmera web interfície, navegueu fins a "En directe View" section to see the real-time video feed. You can adjust stream quality, resolution, and other display settings here.
5.2 Enregistrament i reproducció
The camera supports continuous recording, motion-triggered recording, and scheduled recording to a MicroSD card (up to 128GB) or a Network Video Recorder (NVR).
- Instal·lació de la targeta MicroSD: Power off the camera. Locate the MicroSD card slot (refer to the product diagram or quick start guide). Insert the card carefully until it clicks into place. Power on the camera.
- Formatting MicroSD Card: Accedir a la càmera web interface, go to "Storage" or "SD Card Settings," and format the inserted MicroSD card.
- Programa de gravació: In the "Recording" or "Event" settings, configure your desired recording schedule and event triggers (e.g., motion detection).
- Reproducció: A view foo gravattage, access the "Playback" section in the web interface or through your NVR/client software. Select the date and time to review enregistraments.
5.3 Detecció de moviment i alertes
Configure motion detection to trigger recordings or send alerts.
- Activa la detecció de moviment: Navigate to "Event" or "Motion Detection" settings. Enable the feature.
- Define Detection Area: Draw or select the areas within the camera's view where motion should be detected.
- Ajustar la sensibilitat: Set the sensitivity level to minimize false alarms while ensuring important events are captured.
- Configure Linkage Actions: Specify what happens when motion is detected, such as:
- Trigger recording to MicroSD card or NVR.
- Send email notifications.
- Upload images/videos to an FTP server.
6. Manteniment
6.1 Neteja
- Regularly clean the camera lens and housing with a soft, dry cloth.
- Per a la brutícia persistent, utilitzeu un drap lleugerament humit.ampesbandida amb aigua. Eviteu productes químics agressius o netejadors abrasius.
- Assegureu-vos que la càmera estigui apagada abans de netejar-la.
6.2 actualitzacions de microprogramari
Reviseu periòdicament el fabricant website for firmware updates. Firmware updates can improve performance, add new features, and address security vulnerabilities.
- Baixeu l'últim firmware file for your specific model from the LTS support weblloc.
- Accedir a la càmera web interface and navigate to "System" or "Maintenance" -> "Firmware Upgrade."
- Carregueu el firmware file and follow the on-screen instructions. Do not power off the camera during the upgrade process.
6.3 Còpia de seguretat de dades
Feu còpies de seguretat regularment dels vídeos importantstage from your MicroSD card or NVR to an external storage device to prevent data loss.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La càmera no s'encén | No power supply; Faulty power adapter/PoE switch; Loose connection. | Check power adapter/PoE connection. Ensure power source is active. Test with a known good power source. |
| Sense canal de vídeo | Network connectivity issue; Incorrect IP address; Camera not activated; Firewall blocking access. | Verify network cable connection. Use SADP tool to check/modify IP address. Ensure camera is activated with a strong password. Check firewall settings on your computer/router. |
| Mala qualitat d'imatge | Dirty lens; Insufficient lighting; Incorrect video settings. | Clean the camera lens. Ensure adequate lighting or verify IR functionality. Adjust brightness, contrast, and resolution settings in the web interfície. |
| La detecció de moviment no funciona | Motion detection disabled; Incorrect sensitivity; Detection area not configured. | Enable motion detection in settings. Adjust sensitivity. Define detection areas correctly. |
| La targeta microSD no grava | Card not inserted correctly; Card not formatted; Card full; Recording schedule not set. | Reinsert MicroSD card. Format the card via web interface. Check available storage. Configure recording schedule. |
8. Especificacions
| Característica | Detall |
|---|---|
| Model | LTDHIP3662W-28ISM |
| Sensor d'imatge | 1 / 2.9 "Progressive Scan CMOS" |
| Màx. Resolució | 3072 × 2048 (6MP) |
| Velocitat de fotogrames | 20 fps (3072 × 2048) |
| Lent | Lent fixa de 2.8 mm |
| Camp de View (FOV) | Horitzontal: 98°, Vertical: 67° |
| Il·luminació mínima | Color: 0.04 Lux @ (F1.6, AGC ON), B / N: 0 Lux amb IR |
| Rang IR | Fins a 50 m (164 peus) |
| Compressió de vídeo | H.265+/H.265/H.264+/H.264 |
| Àmbit dinàmic ampli (WDR) | WDR veritable de 120 dB |
| Reducció de soroll digital (DNR) | DNR 3D |
| Àudio | Micròfon incorporat |
| Emmagatzematge local | MicroSD slot, up to 128 GB |
| Interfície de xarxa | 1 port Ethernet autoadaptatiu RJ45 10M / 100M |
| Font d'alimentació | 12 VDC ± 25%, PoE (802.3af, classe 3) |
| Consum d'energia | Màx. 7.5 W |
| Condicions de funcionament | -30 °C a 60 °C (-22 °F a 140 °F), humitat 95% o menys (sense condensació) |
| Protecció d'entrada | IP67 |
| Dimensions | (Refer to product diagram for exact measurements) |
| Pes | (Refer to product packaging) |
9. Garantia i Suport
For information regarding product warranty, technical support, or service, please refer to the official LTS weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Recursos en línia: Visit the LTS support portal for FAQs, firmware downloads, and additional documentation.