GRIFEMA G7007 Rain Shower Head and Hose Instruction Manual

Introducció

Welcome to your new GRIFEMA G7007 Rain Shower Head. This manual provides essential information for the safe installation, operation, and maintenance of your product. Please read it thoroughly before installation and keep it for future reference.

Informació de seguretat

Observeu les següents pautes de seguretat per evitar lesions o danys al producte:

• Tanqueu sempre el subministrament principal d'aigua abans de començar qualsevol treball d'instal·lació o manteniment.
• Use appropriate tools and wear protective gear, such as safety glasses, during installation.
• Ensure all connections are securely tightened to prevent leaks. Do not overtighten.
• Si no esteu segurs sobre algun dels passos d'instal·lació, consulteu un lampista qualificat.
• Do not use abrasive cleaners or harsh chemicals on the product's finish, as this may cause damage.

Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• 1 x GRIFEMA G7007 Rain Shower Head (25.4 cm / 10 inch square)
• 1 x Wall-Mounted Shower Arm
• 1 x Shower Hose (1.5 meters)
• Installation hardware (screws, anchors, seals)

Image: All components included in the GRIFEMA G7007 package.

Configuració i instal·lació

Abans de començar

• Ensure you have the necessary tools: adjustable wrench, PTFE tape, drill, screwdriver, level, pencil.
• Turn off the main water supply to your bathroom.

Passos d'instal·lació

Pas 1: prepareu l'àrea d'instal·lació

Identify the desired location for the shower arm on your wall. Ensure it is at an appropriate height and distance from the water outlet. The system is compatible with standard G1/2" connections.

Image: Universal G1/2" connections for shower system compatibility.

Step 2: Install the Shower Arm

1. Apply PTFE tape to the threaded ends of the shower arm.
2. Screw the shower arm into the wall water outlet. Use a wrench to tighten, ensuring it is level and secure.
3. Attach the decorative flange to cover the wall connection point.

Image: Details of the wall-mounted shower arm and its connections.

Step 3: Attach the Shower Head

1. Ensure a rubber washer is placed inside the shower head connection.
2. Screw the square rain shower head onto the end of the shower arm. Hand-tighten first, then use a wrench for a final snug fit.

Image: The 10-inch square shower head, constructed from 304 stainless steel.

Step 4: Connect the Shower Hose

1. Connect one end of the 1.5-meter shower hose to the designated outlet (if applicable, usually a diverter or separate connection).
2. Connect the other end of the hose to your handheld shower (not included in this set, but compatible).

Image: The GRIFEMA G7007 shower head in use, demonstrating the rain effect and the connected hose.

Step 5: Test for Leaks

Slowly turn on the main water supply. Check all connections for any signs of leakage. If leaks occur, turn off the water, tighten the connections further, and re-test.

Instruccions de funcionament

The GRIFEMA G7007 shower head is designed to provide a consistent and wide rain shower experience.

Adjusting the Shower Head Angle

The shower head features a swivel ball connector that allows for 360° rotation and approximately 15° of tilt. Gently adjust the angle of the shower head to your preferred position for the ultimate rain experience.

Manteniment

Regular maintenance will ensure the longevity and optimal performance of your shower head.

Cleaning the Shower Head Nozzles

The 196 soft silicone nozzles are designed to prevent limescale buildup. To clean, simply rub the nozzles gently with your finger or a soft cloth while the water is running. This will dislodge any mineral deposits and maintain consistent water flow.

Neteja general

Clean the chrome finish of the shower head and arm with a soft, damp cloth and a mild, non-abrasive soap. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.

Resolució de problemes

Si teniu algun problema, consulteu la taula següent per veure els problemes i les solucions més habituals:

Especificacions

Technical details for the GRIFEMA G7007 Rain Shower Head:

• Número de model: G7007
• Shower Head Dimensions: 25.4 cm x 25.4 cm (10 polzades x 10 polzades)
• Overall Product Dimensions (L x W x H): 47 x 30 x 5.5 cm
• Material: 304 Stainless Steel, Rubber (nozzles)
• Acabat: Chrome
• Tipus d'instal·lació: Muntat a la paret
• Nombre de brocs: 196 silicone nozzles
• Caudal: 2.0 GPM (galons per minut)
• Longitud de la mànega de dutxa: 1.5 metres
• Mida de la connexió: G1/2" Universal
• Pes: 1.96 quilograms
• País d'origen: Espanya

Imatge: Dimensional overview of the GRIFEMA G7007 shower system.

Garantia i Suport

For warranty information or technical support regarding your GRIFEMA G7007 Rain Shower Head, please refer to your purchase documentation or contact GRIFEMA customer service directly. Specific warranty terms and contact details can typically be found on the manufacturer's weblloc web o inclòs amb l'embalatge del producte.