1. Introducció
Thank you for choosing the LEPOTEC 30-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.
Contingut del paquet:
- LEPOTEC 30-LED Motion Sensor Cabinet Light (2 units)
- Cable de càrrega USB
- Adhesive Magnetic Strips
- Manual d'usuari
2. Característiques del producte
- Tecnologia LED avançada: Features 30 side-emitting LED lamp beads for bright (up to 200 lumens) yet soft, non-glare illumination. Constructed from durable aluminum alloy.
- Fàcil instal·lació: Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included adhesive tape and metal sheet for secure mounting. Lights can be easily removed for charging or relocation.
- Tres modes de treball: Equipped with a 3-mode switch (ON-OFF-G) for continuous illumination, off, or motion sensor mode.
- USB recarregable: Integrated 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Offers approximately 3 hours of continuous light or 2-4 weeks in motion sensor mode (based on 10 activations per day) on a full charge.
- Aplicació àmplia: Suitable for various indoor locations such as closets, cabinets, corridors, workshops, basements, garages, and stairwells.
Image: Two LEPOTEC 30-LED Motion Sensor Cabinet Lights, illustrating the product design.
3. Configuració i instal·lació
The LEPOTEC cabinet light offers flexible installation options due to its magnetic design.
Passos d'instal·lació:
- Fixació magnètica directa: If installing on an iron surface (e.g., refrigerator, metal cabinet), simply place the light directly onto the surface. The built-in magnet will secure it.
- Adhesive Magnetic Strip Installation (for non-iron surfaces):
- Clean the desired installation surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive tape and attach it to the metal plate.
- Peel off the protective film from the other side of the adhesive tape and firmly press the metal plate onto the cleaned surface.
- Attach the LEPOTEC cabinet light to the metal plate. The light will magnetically adhere to the plate.
Image: Illustration of the built-in magnet for direct attachment and the adhesive magnetic strip method for non-metal surfaces.
4. Instruccions de funcionament
The LEPOTEC cabinet light features a versatile 3-mode switch and motion sensing capabilities.
Selecció del mode:
Locate the switch on the side of the light bar. Slide the switch to select one of the following modes:
- ACTIVITAT: La llum romandrà encesa contínuament.
- DESACTIVAT: La llum s'apagarà.
- G (Motion Sensor Mode): In a dark environment, the light will automatically detect human motion within a 10ft/120° range. It will turn on when motion is detected and automatically turn off after 20 seconds of no movement. The motion sensor is designed to activate only in low-light conditions to conserve battery life.
Imatge: Detallada view of the 3-mode switch (G, OFF, ON) and the Type-C charging port.
Image: Explanation of the auto-induction condition, showing the motion sensor activates only in low light (night) and not in bright light (daytime).
5. Manteniment
Càrrega de la bateria:
The light is equipped with a built-in rechargeable battery. When the battery is low, the light output may diminish. To charge:
- Connect the included USB charging cable to the Type-C charging port on the light bar.
- Connecteu l'altre extrem del cable USB a un adaptador de corrent USB estàndard (no inclòs) o a un port USB de l'ordinador.
- El llum indicador de càrrega s'il·luminarà en vermell durant la càrrega.
- Un cop carregada completament (aproximadament 3 hores), l'indicador lluminós es tornarà verd.
- Desconnecteu el cable de càrrega.
Image: Visual representation of the 1000mAh battery, quick charge capability, and charging status indicators (red for charging, green for fully charged).
Neteja:
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
6. Solució De Problemes
If you encounter issues with your LEPOTEC cabinet light, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Light does not turn on in 'G' (Motion Sensor) mode. | Insufficient darkness; battery low; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the battery. Check if the sensor is clean and unobstructed. |
| Light stays on continuously in 'G' mode or flickers. | Constant motion detected; sensor malfunction; switch issue. | Ensure no continuous motion is within the sensor's range. Try switching to 'OFF' and then back to 'G' mode. If the issue persists, contact customer support. |
| La llum no carrega. | Faulty cable; power source issue; charging port damage. | Try a different USB cable and power adapter. Ensure the charging port is clean and undamaged. |
| La durada de la bateria és més curta del que s’esperava. | Frequent activation; continuous 'ON' mode usage. | Battery life varies with usage frequency. Reduce activations in 'G' mode or use 'OFF' mode when not needed. Ensure the light is fully charged. |
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | LEPOTEC |
| Número de model | TL030-2 |
| Font de llum | 30 perles LED |
| Color clar | Llum Blanca |
| Brillantor | 200 lúmens |
| Wattage | 2 watts |
| Voltage | 3.7 Volts |
| Capacitat de la bateria | Polímer de liti de 1000 mAh |
| Temps de càrrega | Aprox. 3 hores |
| Interval del sensor de moviment | 10 peus / 120° |
| Temps d'apagat automàtic | 20 seconds (after no motion in 'G' mode) |
| Material | Alumini, ferro |
| Dimensions del producte | 8.2"L x 3.5"W x 0.6"H (7.8 inch length for the light bar itself) |
| Pes de l'article | 9.12 unces |
| Tipus d'instal·lació | Magnetic, Adhesive Mount |
| Ús interior/exterior | Interior |
8. Garantia i Suport
LEPOTEC is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LEPOTEC 30-LED Motion Sensor Cabinet Light, please contact our customer service team.
Si us plau, consulteu la documentació de la vostra compra o la del venedor. weblloc web per obtenir detalls específics de la garantia i informació de contacte.