XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation and operation of the XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable. This cable is designed to provide both data transfer and power supply for internal Serial ATA (SATA) devices, simplifying connections within a computer system.

Image 1.1: Two XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cables. Each cable features a SATA 7-pin data connector, a SATA 15-pin power connector, and an IDE 4-pin power connector.

2. Característiques del producte

• Disseny integrat: Combines SATA 22-pin (15+7 pin) data and power into a single cable, eliminating the need for separate data and power cables.
• Transferència de dades d'alta velocitat: Supports SATA III 6 Gbps data transfer rates, backward compatible with SATA I and SATA II. Actual transfer speed is dependent on the connected device's rating.
• Àmplia compatibilitat: Compatible with various SATA devices including hard disk drives (HDDs), solid-state drives (SSDs), optical drives, DVD burners, and PCI cards.
• Connectivitat d'alimentació: Features an IDE 4-pin to SATA 15-pin power connection, supporting multi-voltage compatibilitat.
• Hot-Plugging Support: Designed for hot-plugging without requiring driver installation.
• Construcció duradora: The flat SATA data cable has a soft sheath for flexible installation, and the power cord is covered with an insulated braided sheath to prevent heat generation.
• Longitud: Each cable measures 50cm (19.7 inches) in length.

Image 2.1: Diagram illustrating the 50cm length of both the SATA 7-pin data cable segment and the IDE-SATA 15-pin power cable segment.

Image 2.2: Visual representation of SATA III 6 Gbps data transfer capability and compatibility with HDDs, SSDs, RAID controllers, optical drives, and DVD drives, utilizing an IDE 4-pin power cable.

3. Guia d'instal·lació

Follow these steps to properly install the XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable:

1. Prepareu el vostre sistema: Ensure your computer is powered off and unplugged from the wall outlet before opening the case.
2. Localitza els connectors: Identify the SATA data port on your motherboard or host controller and an available IDE 4-pin power connector from your power supply unit (PSU).
3. Connecta't al dispositiu: Connect the SATA 22-pin (15+7 pin) end of the cable to your SATA hard drive, SSD, or optical drive. Ensure the connection is firm and the stainless steel clip engages securely.


Imatge 3.1: Un primer pla view of the 7-Pin SATA data connector, highlighting the L-type key receptacle and the stainless steel clip designed for secure attachment.



Image 3.2: The XMSJSIY SATA 2-in-1 cable properly connected to a hard disk drive, showing both data and power connections.

4. Connect Data to Motherboard: Plug the 7-pin SATA data connector into an available SATA port on your motherboard or host controller.
5. Connect Power to PSU: Connect the IDE 4-pin power connector to an available IDE 4-pin power cable from your PSU.
6. Gestió de cables: Route the cable neatly within your computer case to ensure proper airflow and prevent interference with other components. The flat design of the data cable assists with organization.
7. Secure and Power On: Close your computer case, plug in the power cord, and power on your system. The connected device should now be recognized by your operating system.

4. Funcionament

Once installed, the XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable operates automatically to provide both data transfer and power to your connected SATA device.

• Transferència de dades: The cable facilitates high-speed data communication between your motherboard/host controller and the SATA device.
• Subministrament d'energia: It supplies the necessary electrical power from your PSU to the SATA device.
• Plug and Play: The cable supports plug-and-play functionality, meaning no additional drivers are typically required for basic operation.
• Hot-Plugging: This cable supports hot-plugging, allowing you to connect or disconnect compatible SATA devices while the system is running, provided your motherboard and operating system also support this feature.

Image 4.1: Illustration of the plug-and-play capability of the cable when connecting to a hard disk or an optical drive.

5. Especificacions

6. Solució De Problemes

If you encounter issues with your XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable, consider the following troubleshooting steps:

• Dispositiu no detectat:
  • Ensure all cable connections (SATA data, SATA power, IDE power) are securely seated.
  • Verifiqueu que el port SATA de la placa base estigui habilitat a la configuració de la BIOS/UEFI.
  • Test the cable with a different SATA device or test the device with a different SATA cable to isolate the problem.
• Velocitats de transferència de dades lentes:
  • Confirm that both your motherboard's SATA port and the connected device support SATA III (6 Gbps). The cable's speed is limited by the slowest component.
  • Check for updated motherboard drivers.
• Problemes d'alimentació:
  • Assegureu-vos que la vostra font d'alimentació (PSU) tingui prou aiguatage to power all connected devices.
  • Verify the IDE 4-pin power connection from the PSU is functional.

7. Garantia i Suport

For warranty information or technical support regarding your XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable, please refer to the product packaging or contact XMSJSIY customer service directly. Contact details can typically be found on the manufacturer's official weblloc web o a través del venedor on es va comprar el producte.