Introducció
Thank you for choosing the TORRAS Electric Lint Remover. This device is designed to efficiently remove lint and pills from various fabrics, restoring your garments and upholstery to a like-new condition. Please read this manual carefully before use to ensure safe and optimal performance.
Precaucions de seguretat
- Mantingueu el dispositiu fora de l'abast dels nens.
- Do not use the device on wet fabrics.
- Ensure the protective cover is securely in place before operation.
- Do not press the device too hard against the fabric to avoid damage.
- Avoid touching the blades directly.
- Desendolleu el dispositiu abans de netejar-lo o quan no l'utilitzeu durant períodes prolongats.
- If the device enters safety mode (indicated by three lamps flashing), clean the lint collector and reattach the front cover securely. If the issue persists, contact customer support.
Contingut del paquet
- TORRAS Electric Lint Remover
- Fulles de recanvi
- Raspall de neteja
- Cable de càrrega USB
- Manual d'usuari
Producte acabatview
- Funda protectora: 0.38mm aerospace-grade stainless steel cover with a 9° floating design to protect fabrics.
- Sistema de 6 fulles: High-precision stainless steel blades for efficient lint removal.
- Motor: Powerful 11000 RPM motor for quick and effective operation.
- Recollidor de pelusses: Transparent, detachable container for collected lint.
- Power Button/Mode Selector: Controls power and switches between 3 speed modes.
- Port de càrrega: USB-C port for convenient charging.
- Fluffy Guard: An accessory designed to protect delicate fabrics.
- AI Protection Chip: Monitors operation 233 times per second to prevent fabric damage.
Configuració
1. Càrrega del dispositiu
Before first use, fully charge the lint remover. Connect the provided USB cable to the device's charging port and a suitable USB power adapter (not included). The indicator lights will show the charging status. A full charge provides up to 180 minutes of continuous use.
2. Attaching the Fluffy Guard
For delicate fabrics, attach the fluffy guard to the protective cover. This accessory helps maintain an optimal distance between the blades and the fabric, preventing damage.
Instruccions de funcionament
1. Preparing the Fabric
Lay the garment or fabric flat on a hard, smooth surface. Ensure there are no wrinkles or folds that could be caught by the blades.
2. Engegada i selecció del mode
Press the power button to turn on the device. Press the button repeatedly to cycle through the three speed modes:
- Mode 1 (baixa velocitat): Ideal for delicate fabrics like silk or thin knits.
- Mode 2 (velocitat mitjana): Suitable for everyday fabrics like cotton or synthetic blends.
- Mode 3 (alta velocitat): Best for thick fabrics such as wool coats, sweaters, or upholstery.
3. Removing Lint
Gently glide the lint remover over the fabric surface. Do not apply excessive pressure. The device is designed to lift and cut lint effectively without pulling or damaging the fabric. Work in small sections, moving the device in circular motions or straight strokes.
Manteniment
1. Emptying the Lint Collector
Regularly check and empty the lint collector. The collector is magnetically attached for easy removal. Simply pull it off, discard the collected lint, and reattach it securely.
2. Cleaning the Blades and Protective Cover
After emptying the lint collector, use the provided cleaning brush to remove any remaining lint or debris from the blades and the inside of the protective cover. Ensure the device is turned off before cleaning.
3. Replacing Blades
When the blades become dull or damaged, they can be replaced. Refer to the replacement blade instructions for detailed steps. Ensure the device is off and unplugged before attempting to replace blades.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén ni es carrega. | Low battery; Safety mode activated; Loose front cover. | Charge the device fully. Ensure the front cover is securely attached. Clean the lint collector and reattach the cover to deactivate safety mode. |
| Poor lint removal performance. | Lint collector is full; Blades are dull or dirty; Incorrect speed mode. | Empty the lint collector. Clean the blades and cover. Select a higher speed mode for thicker fabrics. Consider replacing blades if dull. |
| El dispositiu s'atura durant el funcionament. | Safety mode activated (e.g., cover loose, collector full). | Check if the front cover is loose or the lint collector is full. Secure the cover and empty the collector. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | TORRAS |
| Número de model | B08HCYQQZV |
| Material | Acer inoxidable d'alta qualitat |
| Color | Red-Purple (Main Unit) |
| Dimensions del producte (P x A x A) | 7.3 x 6.5 x 17.8 cm |
| Material del mànec | Acer inoxidable |
| Recompte d'unitats | 1 |
| Mode d'operació | Automàtic |
| Velocitat del motor | 11000 RPM |
| Fulles | 6-blade system |
| Capacitat de la bateria | 2000 mAh |
| Temps d'ús continu | Up to 180 minutes (Low Speed) |
| Carregant | USB-C, 2-way power (cordless or while charging) |
Garantia i suport
Garantia del fabricant
This product comes with a 365-day long-term quality warranty. If the product breaks, fails to charge, or does not operate under normal use within the warranty period, a one-time new product replacement service will be provided unconditionally.
Contacta amb l'assistència
For warranty claims or any inquiries, please contact TORRAS customer support. You can typically find the contact option by navigating to the seller's page on the purchase platform (e.g., Amazon) and selecting "Ask a question" under the seller's name.
Nota important sobre els vídeos
No official product video URLs were provided in the product data. Therefore, no videos could be embedded in this manual.