1. Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your Warm Audio WA87 R2 Large-diaphragm Condenser Microphone. The WA87 R2 is designed for professional audio recording applications, offering multiple polar patterns and robust construction.
2. Instruccions de seguretat
- Always handle the microphone with care to prevent damage to the capsule and internal components.
- Avoid exposing the microphone to extreme temperatures, humidity, or direct sunlight.
- Ensure proper phantom power (48V) is supplied by your audio interface or mixer. Incorrect power can damage the microphone.
- Disconnect the microphone from power before cleaning or performing any maintenance.
- Do not attempt to open the microphone casing, as this may void the warranty and expose sensitive electronics.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- Warm Audio WA87 R2 Microphone
- Muntatge de xoc
- Muntatge dur
- Wooden Storage Box
4. Producte acabatview
The Warm Audio WA87 R2 is a large-diaphragm condenser microphone featuring three switchable polar patterns, a 10dB pad, and a high-pass filter. Its design incorporates a genuine CineMag transformer for enhanced performance.

Davant view of the Warm Audio WA87 R2 microphone, showcasing its nickel-plated brass body, metal grille, and the Warm Audio logo. The polar pattern switch is visible above the logo, allowing selection between cardioid, omnidirectional, and figure-8 patterns.
5. Configuració
- Muntatge: Secure the WA87 R2 microphone into the provided shockmount or hard mount. Attach the mount to a standard microphone stand.
- Connexió: Connect an XLR cable from the microphone's output to an XLR input on your audio interface or mixer.
- Potència fantasma: Activate 48V phantom power on your audio interface or mixer. The microphone requires phantom power to operate.
- Guanyar Staging: Adjust the input gain on your audio interface or mixer to achieve an appropriate signal level without clipping.
6. Funcionament
6.1 Polar Patterns
The WA87 R2 offers three selectable polar patterns via a switch on the microphone body:
- Cardioid (Heart-shaped symbol): Picks up sound primarily from the front, rejecting sound from the sides and rear. Ideal for vocals and single instruments.
- Omnidirectional (Circle symbol): Picks up sound equally from all directions. Suitable for capturing room ambiance or multiple sources.
- Figure-8 (Figure-eight symbol): Picks up sound equally from the front and rear, rejecting sound from the sides. Useful for duets or M/S stereo recording.
6.2 10dB Pad
A 10dB pad switch is located on the microphone body. Engage this switch when recording very loud sound sources to prevent input overload and distortion.
6.3 High-Pass Filter
The high-pass filter switch reduces low-frequency rumble and proximity effect. Activate this filter when recording vocals or instruments where excessive bass frequencies are undesirable.
7. Manteniment
- Mantingueu el micròfon net netejant-lo amb un drap suau i sec.
- Store the microphone in its protective wooden box when not in use to shield it from dust and physical damage.
- Avoid touching the microphone capsule directly, as oils and debris can affect performance.
8. Solució De Problemes
- Sense so: Ensure 48V phantom power is enabled on your audio interface/mixer. Check all cable connections. Verify input gain is set appropriately.
- So distorsionat: Engage the 10dB pad if recording loud sources. Reduce input gain on your audio interface/mixer.
- Greus/Rumble excessius: Activate the high-pass filter. Ensure proper microphone placement to minimize proximity effect.
- Senyal intermitent: Check XLR cable for damage or loose connections. Try a different XLR cable.
9. Especificacions
| Característica | Especificació |
|---|---|
| Factor de forma del micròfon | Diafragma gran |
| Patrons polars | Bidirectional, Omnidirectional, Unidirectional (Cardioid) |
| Sensibilitat d'àudio | 10 decibels |
| Ràtio senyal / soroll | 10 dB |
| Resposta de freqüència | 20 Hz - 20 kHz |
| Tecnologia de connectivitat | XLR |
| Font d'alimentació | Corded Electric (48V Phantom Power) |
| Material | Llautó, Níquel |
| Pes de l'article | 1 lliures (0.45 kg) |
| Dimensions del producte (L x A x A) | 14.55 x 13.7 x 6.05 polzades (aprox. 37 x 34.8 x 15.4 cm) |
| Número de model | WA87-R2 |
| UPC | 850016400581 |
10. Garantia i Suport
For warranty information and technical support, please refer to the official Warm Audio weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el comprovant de compra per a reclamacions de garantia.
You can visit the Warm Audio store for additional resources: Warm Audio Store