Sylvac S_Cal EVO Basic Digital Caliper User Manual

Introducció

This manual provides essential information for the proper use, setup, operation, and maintenance of your Sylvac S_Cal EVO Basic Digital Caliper. This basic digital caliper is designed for precise dimensional measurements and does not feature data output capabilities.

Image: The Sylvac S_Cal EVO Basic Digital Caliper, displaying a measurement of 20.58 mm on its digital screen. The caliper features a main scale marked in millimeters and inches, with the Sylvac logo and "S_Cal EVO Basic" text visible on the beam. It also indicates an IP67 rating for protection against dust and water.

Configuració

Instal·lació de la bateria

The S_Cal EVO Basic requires a Lithium battery for operation. Ensure the battery is correctly inserted before first use.

1. Locate the battery compartment cover on the digital unit.
2. Traieu la coberta amb cura.
3. Insert the Lithium battery, observing the correct polarity (+/-) as indicated inside the compartment.
4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

Initial Power On and Zero Setting

After battery installation, the caliper should power on. If not, press the 'ON' button (if present, otherwise it might be automatic). To ensure accurate measurements, always zero the caliper before use.

1. Close the jaws completely, ensuring they are clean and free of debris.
2. Press the 'ZERO' button (or 'SET' button, as indicated on the device) to set the display to 0.00 mm (or 0.000 inch).
3. The caliper is now ready for measurement.

Instruccions de funcionament

Mesura de dimensions externes

Use the outside jaws to measure external dimensions of an object.

1. Open the outside jaws wider than the object to be measured.
2. Place the object between the jaws.
3. Gently close the jaws until they make firm contact with the object. Do not apply excessive force.
4. Llegeix la mesura que es mostra a la pantalla digital.

Mesura de dimensions internes

Use the inside jaws to measure internal dimensions, such as bore diameters.

1. Insert the inside jaws into the opening to be measured.
2. Open the jaws until they make firm contact with the internal surfaces.
3. Llegeix la mesura que es mostra a la pantalla digital.

Profunditat de mesura

Use the depth rod to measure the depth of holes or steps.

1. Place the end of the main beam firmly on the surface from which the depth is to be measured.
2. Extend the depth rod into the hole or down to the step until it makes contact with the bottom surface.
3. Llegeix la mesura que es mostra a la pantalla digital.

Etapes de mesura

Use the step measuring faces to measure the height of steps.

1. Place the fixed jaw's step face on the higher surface.
2. Slide the movable jaw's step face down to the lower surface.
3. Llegeix la mesura que es mostra a la pantalla digital.

Conversió d'unitats

If your model supports it, press the 'MODE' button to switch between millimeter (mm) and inch (in) units. The current unit will be indicated on the display.

Manteniment

Neteja

Regular cleaning ensures the longevity and accuracy of your caliper.

• Wipe the caliper clean with a soft, lint-free cloth after each use.
• Per a la brutícia persistent, utilitzeu un drap lleugerament humit.ampened with isopropyl alcohol. Avoid harsh solvents.
• Assegureu-vos que no entri líquid als components electrònics.

Emmagatzematge

Proper storage protects the caliper from damage and environmental factors.

• Guardeu el calibrador a la seva funda protectora quan no l'utilitzeu.
• Keep it in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances.
• Slightly open the jaws before storing to relieve tension on the measuring faces.

Canvi de bateria

Replace the battery when the display becomes dim or shows a low battery indicator. Refer to the "Battery Installation" section for replacement steps.

Resolució de problemes

Especificacions

Garantia i Suport

For information regarding product warranty, please refer to the documentation provided with your purchase or visit the official Sylvac website. For technical support or service inquiries, please contact Sylvac customer service directly. Contact details are typically available on the manufacturer's weblloc o embalatge del producte.

Manufacturer: Sylvac SA