Behringer RX1202FX V2 12-Channel Analog Mixer with FX

Introducció

The Behringer RX1202FX V2 is a premium 12-input microphone/line mixer designed for professional audio applications. This 3U rack-mountable analog mixer offers ultra-low noise operation and versatile connectivity for various audio setups. It features high-quality XENYX microphone preamps, a warm 2-band 'British' EQ on each channel, and a studio-grade 24-bit multi-FX processor with 100 presets including reverb, chorus, flanger, delay, and pitch shifter.

This manual provides essential information for the safe and efficient operation of your RX1202FX V2 mixer. Please read it thoroughly before use and retain it for future reference.

Instruccions importants de seguretat

ADVERTIMENT: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Llegeix aquestes instruccions.
• Conserveu aquestes instruccions.
• Compte amb totes les advertències.
• Seguiu totes les instruccions.
• No utilitzeu aquest aparell prop de l'aigua.
• Netejar només amb un drap sec.
• No obstruïu cap obertura de ventilació. Instal·leu d'acord amb les instruccions del fabricant.
• No instal·leu a prop de cap font de calor com ara radiadors, registres de calor, estufes o altres aparells (inclosos amplificadors) que produeixen calor.
• No anul·leu el propòsit de seguretat de l'endoll polaritzat o de connexió a terra. Un endoll polaritzat té dues fulles, una més ampla que l'altra. Un endoll de tipus posada a terra té dues fulles i una tercera punta de connexió a terra. La fulla ampla o la tercera punta es proporcionen per a la vostra seguretat. Si l'endoll proporcionat no encaixa a la vostra presa de corrent, consulteu un electricista per substituir la presa obsoleta.
• Eviteu que el cable d'alimentació sigui trepitjat o pessigat, especialment als endolls, els receptacles i el punt on surten de l'aparell.
Utilitzeu només accessoris/accessoris especificats pel fabricant.
• Desendolleu aquest aparell durant les tempestes amb llamps o quan no l'utilitzeu durant llargs períodes de temps.
• Demaneu tot el servei a personal de servei qualificat. El manteniment és necessari quan l'aparell s'ha fet malbé d'alguna manera, com ara el cable d'alimentació o l'endoll està danyat, s'ha vessat líquid o han caigut objectes a l'aparell, l'aparell ha estat exposat a la pluja o la humitat, no funciona amb normalitat. , o s'ha deixat caure.

Configuració

1. Desembalatge i inspecció

Carefully unpack your RX1202FX V2 mixer. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging materials for future shipping or if the unit needs to be returned for service.

2. Muntatge en bastidor

The RX1202FX V2 is designed for standard 19-inch rack mounting, occupying 3U of rack space. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.

3. Connexió d'alimentació

Connect the supplied power cord to the AC/POWER inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the voltage matches the requirements specified on the unit. The mixer operates at 120 Volts.

4. Connecting Inputs

The RX1202FX V2 offers 12 input channels:

• Microphone Inputs (Channels 1-8): Use balanced XLR cables for connecting microphones. These channels feature XENYX preamps.
• Line Inputs (Channels 1-12): Use balanced 1/4" TRS or unbalanced 1/4" TS cables for connecting line-level sources such as keyboards, drum machines, or other audio devices. Channels 9-12 are stereo line inputs.
• Entrada CD/Cinta: Connect external playback devices (e.g., CD player, media player) using RCA cables to the CD/TAPE IN jacks.

5. Connecting Outputs

• Sortides principals: Connect your main PA system or recording interface to the MAIN OUT (XLR) jacks.
• Sortides de la sala de control: Connect your studio monitors to the CTRL OUT (1/4" TRS) jacks.
• Sortida d'auriculars: Connect headphones to the PHONES (1/4" TRS) jack for monitoring.
• Enviaments auxiliars: Use the AUX SENDS (1/4" TS) to send signals to external effects processors or monitor mixes.
• Aux Returns: Connect the output of external effects processors to the AUX RETURNS (1/4" TS) jacks.

Imatge: Rear panel of the Behringer RX1202FX V2 mixer. This view displays the AC power inlet, power switch, main XLR outputs, control room outputs, monitor outputs, CD/Tape inputs and outputs, Aux sends and returns, and the 8 XLR microphone inputs with corresponding 1/4" line inputs and inserts.

Instruccions de funcionament

1. Encès / apagat

After all connections are made, press the AC/POWER switch on the rear panel to turn the unit on. Always turn on your mixer before connecting power amplifiers or active speakers, and turn it off after them, to prevent loud thumps.

2. Channel Controls (Channels 1-12)

Imatge: Front panel of the Behringer RX1202FX V2 mixer. This view highlights the individual channel strips with Gain, High EQ, Low EQ, MON (Monitor) send, FX send, PAN/BAL, and Level faders. The master section with the FX processor display, program knob, FX to Main/MON controls, CD/Tape controls, and Main Mix/Phones level controls is also visible.

• GUANY: Adjusts the input sensitivity for the microphone or line input. Use the CLIP LED as a guide; it should flash only occasionally on the loudest peaks.
• EQ ALTA: Adjusts the high-frequency content of the channel.
• EQ BAIXA: Adjusts the low-frequency content of the channel.
• MON (Monitor) Send: Controls the amount of signal sent to the monitor output. This is pre-fader.
• Enviament FX: Controls the amount of signal sent to the internal effects processor. This is post-fader.
• PAN/BAL: Pans the mono signal (channels 1-8) or balances the stereo signal (channels 9-12) across the stereo main mix.
• LEVEL Fader: Adjusts the overall output level of the channel to the main mix.
• LED CLIP: Illuminates when the input signal is too high, indicating potential distortion. Reduce the GAIN if this LED lights up frequently.

3. Alimentació phantom (+48 V)

For condenser microphones, activate the +48V PHANTOM switch on the rear panel. Ensure microphones are connected before engaging phantom power to prevent damage.

4. FX Processor

The RX1202FX V2 includes a 24-bit multi-effects processor with 100 presets. Use the PROGRAM knob to select the desired effect. The FX TO MAIN and FX TO MON controls in the master section adjust the amount of the effect signal sent to the main mix and monitor mix, respectively.

5. Master Section Controls

• MAIN MIX Fader: Controla el nivell de sortida general de la mescla estèreo principal.
• PHONES/CTRL ROOM Level: Adjusts the output level for the headphones and control room outputs.
• CD/TAPE TO MAIN/CTRL ROOM: Buttons to route the CD/Tape input to the main mix or control room/phones output.

Manteniment

Neteja

Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Keep faders and knobs free from dust and debris.

Emmagatzematge

When not in use for extended periods, store the mixer in a cool, dry environment, away from direct sunlight and extreme temperatures. If rack-mounted, ensure the rack provides adequate protection from dust and physical impact.

Resolució de problemes

Especificacions

Garantia

Behringer products, distributed by authorized MUSIC Tribe dealers, include a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty information provided with your product or visit the official Behringer weblloc.

Suport

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact your authorized Behringer dealer or visit the official Behringer support website for up-to-date information, FAQs, and service contact details.