AOPUTTRIVER AP-570S-APP Bluetooth Clamp Manual d'usuari del comptador

1. Producte acabatview

The AOPUTTRIVER AP-570S-APP is a portable, high-performance digital clamp meter designed for troubleshooting electrical problems. It offers a wide range of measurement functions including AC/DC voltage, AC/DC current, resistance, capacitance, frequency, temperature, diode, and continuity testing. This meter features Bluetooth connectivity for mobile phone app integration, allowing for data analysis and remote monitoring.

Image 1.1: AOPUTTRIVER AP-570S-APP Bluetooth Clamp Meter with included test leads, thermocouple, and battery.

2. Precaucions de seguretat

To ensure safe operation and prevent damage to the meter, please observe the following safety guidelines:

• Seguiu sempre les instruccions proporcionades en aquest manual.
• No intenteu mesurar el voltages o corrents que superen els límits màxims especificats.
• Ensure the test leads are properly connected and in good condition before each use.
• Do not operate the meter if it appears damaged or if the insulation is compromised.
• Traieu la pila si no heu d'utilitzar el mesurador durant un període prolongat per evitar fuites.
• Extremeu les precaucions quan treballeu amb circuits elèctrics en tensió.
• Desconnecteu sempre l'alimentació del circuit abans de fer mesures de resistència, capacitança o díode.

3. Disseny i components del producte

Familiarize yourself with the various parts of your AP-570S-APP clamp metre:

Image 3.1: Detailed layout of the clamp meter with labels for each component.

• Clamp Mandíbules: Opens up to 45mm to enclose conductors for current measurement.
• NCV Detection Area: S'utilitza per a voltatge de CA sense contactetage detecció.
• Jaw-Opening Handle: Used to open and close the clamp mandíbules.
• Interruptor rotatiu: Selects measurement functions and ranges.
• Tecla HOLD: Press to hold the current reading. Press and hold for more than 2 seconds to activate/deactivate backlight.
• Tecla SELECT: Used to switch between functions within a rotary switch position (e.g., AC/DC, Diode/Continuity).
• MAX/MIN Key: Press to display maximum or minimum measured values. Press and hold for 2 seconds to exit.
• REL Key: Relative measurement function.
• Hz/Duty Key: On ACV/ACA or Hz range, press to select Frequency or Duty Cycle measurement.
• Pantalla LCD: 6000 counts digital display with full function symbols.
• Presa d'entrada COM: Common input for test leads.
• VΩHzT+ Input Jack: Entrada per al voltage, resistance, frequency, temperature, diode, and capacitance measurements.

4. Configuració

4.1 Instal·lació de la bateria

The AP-570S-APP requires 2 AAA batteries (included). To install or replace batteries:

1. Ensure the meter is powered OFF.
2. Localitzeu la tapa del compartiment de la bateria a la part posterior del mesurador.
3. Utilitzeu un tornavís per obrir el compartiment de la bateria.
4. Introduïu les 2 piles AAA, respectant la polaritat correcta (+/-).
5. Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.

If the battery symbol flashes on the display, the battery is low and needs replacement for continued normal operation.

4.2 Bluetooth APP Connection

The meter can connect to a mobile phone via Bluetooth for data measurement and analysis using the 'AiLink' app.

Image 4.1: Visual guide for connecting the meter to the AiLink mobile application.

1. Pas 1: Baixeu l'aplicació. Scan the QR code provided in the product packaging or search for 'AiLink' in the Google Play Store (for Android) or Apple App Store (for iOS). Download and install the application. The app is compatible with iPhone 4S (iOS 7.0 and up) or Android 4.30 systems and up. You can also visit aicare.net.cn/app/ailink/download/ for direct download.
2. Step 2: Connect to the Phone. Open the 'AiLink' app. Ensure Bluetooth is enabled on your mobile device. The app should automatically pair with the clamp meter nearby. Press the 'App' button within the application to initiate the connection.
3. Step 3: Start Measurement. Once connected, you can start measurements, save data, and analyze it through the mobile app.

5. Instruccions de funcionament

5.1 Funcionament general

To begin a measurement, turn the Rotary Switch to the desired function. Use the SELECT button to toggle between AC/DC modes or other sub-functions if available within that range.

5.2 Funcions de mesura

The AP-570S-APP offers the following measurement capabilities:

• Volum AC / DCtage: Mesura AC voltage from 6V to 750V and DC voltage from 600mV to 1000V. Connect test leads to the VΩHzT+ and COM jacks.
• Corrent CA/CC: Measure AC/DC current from 600A to 1000A using the clamp jaws. Ensure the conductor is centered within the jaws.
• Resistència: Measure resistance from 600Ω to 60MΩ. Connect test leads to the VΩHzT+ and COM jacks.
• Capacitat: Measure capacitance from 6nF to 60mF. Connect test leads to the VΩHzT+ and COM jacks.
• Freqüència: Measure frequency from 9.999Hz to 9.999MHz. Use the Hz/Duty key to switch to frequency measurement.
• Temperatura: Measure temperature from -20℃ to 1000℃ (-4℉ to 1832℉) using the included thermocouple. The unit can be switched between ℃ and ℉.


Image 5.1: Temperature measurement using the thermocouple, demonstrating the ℃/℉ switchable function.

• Prova de díodes i continuïtat: Perform diode and audible continuity tests. Connect test leads to the VΩHzT+ and COM jacks.
• Vol. AC sense contactetagDetecció de e (NCV): Detecta el volum de CAtage without physical contact. Place the NCV detection area near the conductor. The meter will indicate voltage presence with an audible sound and light.


Image 5.2: Non-Contact Voltage (NCV) detection in progress, showing the meter detecting voltage without touching wires.

5.3 Funcions especials

• Conservació de dades: Premeu el botó HOLD per congelar la lectura actual a la pantalla. Premeu-lo de nou per alliberar-la.
• Il·luminació de fons: Press and hold the HOLD button for more than 2 seconds to turn the backlight ON or OFF. This feature aids in reading measurements in dim environments.


Image 5.3: The meter's display with backlight enabled, improving visibility in dark conditions.

• Apagat automàtic: The meter will automatically power off after a period of inactivity to save battery life. Set the function switch to OFF when finished operating to conserve battery power.

6. Manteniment

6.1 Neteja

Netegeu la c del comptadorasing amb anunciamp drap i detergent suau. No utilitzeu abrasius ni dissolvents. Assegureu-vos que el mesurador estigui completament sec abans d'utilitzar-lo.

6.2 Emmagatzematge

When not in use, store the meter in a dry, cool place, away from direct sunlight and extreme temperatures. Remove the batteries if storing for an extended period.

7. Solució De Problemes

• El mesurador no s'encén: Comproveu la instal·lació de les piles i assegureu-vos que no estiguin esgotades. Substituïu-les si cal.
• Indicador de bateria baixa: If the battery symbol flashes on the display, replace the batteries immediately.
• Lectures inexactes: Ensure test leads are properly connected and the correct function is selected. Verify the circuit is within the meter's specified range.
• Problemes de connectivitat de l'aplicació Bluetooth: Ensure Bluetooth is enabled on your mobile device and the 'AiLink' app has necessary permissions (e.g., location access). Restart both the meter and the app if connection fails.
• Preguntes generals: If you encounter any issues not covered here, please consult the manufacturer for assistance.

8. Especificacions

9. Garantia i Suport

For any questions regarding the use, maintenance, or troubleshooting of your AOPUTTRIVER AP-570S-APP Bluetooth Clamp Meter, please contact AOPUTTRIVER customer support. We are committed to assisting you with any inquiries you may have.

For more information about AOPUTTRIVER products, please visit the official AOPUTTRIVER Store.