BONTEC Dual Monitor Stand Riser

Introducció

The BONTEC Dual Monitor Stand Riser is designed to enhance your workspace ergonomics and organization. This versatile stand elevates your monitors to an optimal viewing height, reducing strain on your neck and back. Its adjustable length and swivel angles allow for a customized setup, while integrated storage compartments and cable management features help maintain a tidy desk environment.

Image: The BONTEC Dual Monitor Stand Riser in a typical setup, supporting two monitors and providing under-shelf storage.

Informació de seguretat

• Ensure all components are securely fastened before placing monitors or other items on the stand.
• No supereu la capacitat de càrrega màxima de 44 lliures (20 kg).
• Col·loqueu el suport sobre una superfície estable i anivellada per evitar que es bolqui.
• Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
• Avoid exposing the stand to excessive moisture or direct sunlight.

Contingut del paquet

Si us plau, verifiqueu que tots els components següents estiguin inclosos al vostre paquet:

• Monitor Stand (Engineered Wood components)
• Cargols de muntatge
• Claus de clavilles
• Tornavís (per al muntatge)
• Non-slip Pads
• Clip de gestió de cables

Configuració

Assembly of the BONTEC Dual Monitor Stand Riser is straightforward and typically takes about 3 minutes. Follow these steps:

1. Preparació dels components: Lay out all wooden panels, screws, and dowel pins. Identify the main center section and the two adjustable side sections.
2. Assemble Side Sections: For each side section, insert the dowel pins into the pre-drilled holes on the bottom panel. Align the side panels with the dowel pins and screw holes. Secure the side panels to the bottom panel using the provided screws and screwdriver.
   

   Image: Step-by-step visual guide for assembling the monitor stand sections using screws and dowel pins.

3. Connecta les seccions: Once the two side sections are assembled, position them on either side of the central section. The design allows for adjustable length and angle.
4. Aplicar coixinets antilliscants: Attach the provided non-slip pads to the bottom of each stand section to prevent scratching your desk surface and ensure stability.
   

   Image: Detail of the non-slip pads on the bottom of the stand, designed to protect your desk.

Guia de vídeo de muntatge

Operating the Stand

The BONTEC Dual Monitor Stand Riser offers several features for an optimized workspace:

• Longitud ajustable: The stand's length can be adjusted from 31.5 inches to 42.5 inches by sliding the side sections. This allows it to fit various desk sizes and accommodate different monitor setups.
• Angle de gir: The two side sections can be swiveled to create a straight, angled, or V-shaped configuration, providing flexibility for your viewing preference and desk layout.
• Alçada ergonòmica: By raising your monitors to eye level, the stand helps to reduce neck, back, and shoulder strain, promoting a healthier posture during long periods of use.
• Emmagatzematge integrat: Utilize the space underneath the stand to store your keyboard, mouse, laptop, files, or other office essentials, keeping your desktop clear and organized.
• Suport per a telèfon intel·ligent: A dedicated slot is provided to hold your smartphone upright for easy viewing i accés.
• Gestió de cables: An opening and included clip assist in routing and organizing cables, preventing clutter and tangles.

Image: Illustrations demonstrating the adjustable length and swivel angle capabilities of the stand.

Image: Visual comparison of posture before and after using the ergonomic monitor stand.

Imatge: Primer pla views of the integrated smartphone holder and cable management system.

Vídeo de les característiques del producte

Manteniment

To ensure the longevity and appearance of your BONTEC Dual Monitor Stand Riser, follow these simple maintenance guidelines:

• Neteja: Netegeu la superfície amb un suau, damp drap. Per a marques difícils, es pot utilitzar una solució de sabó suau i assecar-les després amb un drap net. Eviteu netejadors abrasius o productes químics agressius.
• Pols: Regularly dust the stand to prevent accumulation, which can dull the finish.
• Inspecció: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
• Eviteu la sobrecàrrega: Do not place items heavier than the specified load capacity on the stand.

Image: The stand's surface is easy to clean with a damp tela.

Resolució de problemes

Si teniu algun problema amb el suport del monitor, consulteu les solucions habituals següents:

• El suport és inestable: Ensure all assembly screws are fully tightened. Check that the stand is placed on a flat, stable surface. Verify that the non-slip pads are correctly applied to all contact points.
• Difficulty Adjusting Length/Angle: Ensure no objects are obstructing the sliding or swiveling mechanism. Apply gentle, even pressure when adjusting.
• Scratches on Desk: Confirm that the non-slip pads are properly installed and intact. If pads are worn, contact customer support for replacements.
• Elements que rellisquen: Ensure the stand is level and not tilted. Do not overload the stand beyond its weight capacity.

Especificacions

Garantia i Suport

BONTEC products are designed for durability and user satisfaction. For specific warranty details, please refer to the product packaging or contact BONTEC customer support.

For additional assistance, troubleshooting, or to download the full installation manual, please visit the official BONTEC weblloc web o consulteu el document PDF proporcionat:

• Guia d'usuari oficial (PDF): Descarrega el manual d'instal·lació
• BONTEC Store: Visit the BONTEC Store on Amazon