Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Sunlite 87732-SU 6 Inch CCT Dimmable LED Recessed Light Fixture. This energy-efficient fixture offers adjustable color temperature and wattage, making it a versatile lighting solution for various applications. Please read these instructions carefully before installation and retain them for future reference.
Informació de seguretat
ADVERTIMENT: This product can expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to http://www.P65Warnings.ca.gov.
- Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
- Consulteu un electricista qualificat si no esteu segur del procés d'instal·lació.
- Assegureu-vos que totes les connexions elèctriques compleixin els codis i les ordenances locals.
- Do not install in areas where the operating temperature exceeds the fixture's rating.
- This fixture is ETL listed for wet locations, making it suitable for damp ambients.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Sunlite 87732-SU LED Recessed Light Fixture
- Caixa de connexió
- Instruccions d'instal·lació (aquest manual)
Configuració i instal·lació
The Sunlite 87732-SU fixture is designed for easy installation in new construction or retrofit applications. It features spring-loaded clips for a secure fit.
Pre-Installation Steps: Color Temperature and Wattage Selecció
Before installing the fixture, select your desired color temperature (CCT) and wattage output using the switches located on the back of the fixture. These settings cannot be changed easily once installed.
- Selecció de la temperatura del color (CCT): Choose between 3000K (Warm White), 3500K (Neutral White), or 4000K (Cool White) to match your preference or room ambiance.
- Wattage/Lumen Output Selection: Select the desired brightness level:
- 9 Watts for 750 Lumens
- 13 Watts for 1050 Lumens
- 19 Watts for 1500 Lumens


Passos generals d'instal·lació:
- Desconnecteu l'alimentació a l'interruptor principal.
- Cut a hole in the ceiling according to the fixture's dimensions (typically 6 inches for this model). Refer to the dimension image for precise measurements.
- Open the junction box and make the necessary electrical connections (line, neutral, ground) to your building's wiring. This fixture is multi-volt compatible (120-277V).
- Secure the junction box inside the ceiling.
- Connect the fixture to the junction box.
- Push the fixture into the ceiling opening. The spring-loaded clips will hold it in place.
- Restaura l'alimentació i prova l'aparell.


Instruccions de funcionament
Once installed, the Sunlite 87732-SU LED fixture operates like any standard light fixture. The primary operational feature is its dimmability.
- Funcionalitat regulable: This fixture is dimmable when connected to a compatible 0-10 Volt low voltage dimmer control. Ensure your dimmer is rated for 0-10V operation for optimal performance and a dimming range of 100-10%.
- Índex de reproducció del color (CRI): With a 90 CRI rating, this fixture provides excellent color accuracy, making colors appear truer and more vivid.

Manteniment
The Sunlite 87732-SU LED fixture is designed for minimal maintenance due to its long-life LED technology.
- Neteja: Per netejar l'aparell, assegureu-vos que l'alimentació estigui apagada. Feu servir un drap suau, sec o lleugerament humit.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Substitució de bombetes: The integrated LED chips have a lifespan of up to 50,000 hours, eliminating the need for frequent bulb replacements.
Resolució de problemes
Si teniu problemes amb el vostre dispositiu, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | Sense corrent, cablejat solt, interruptor defectuós | Check circuit breaker. Verify all wiring connections. Test the wall switch. |
| La llum parpelleja | Regulador d'intensitat incompatible, connexió fluixa, volumtage fluctuacions | Ensure dimmer is 0-10V compatible. Check wiring. Consult an electrician for voltage qüestions. |
| La llum no s'atenua correctament | Incompatible dimmer, incorrect dimmer wiring | Use a 0-10V low voltage dimmer. Verify dimmer wiring according to its instructions. |
Especificacions
| Marca | Sunlite |
| Número de model | 87732-SU |
| UPC | 653703877327 |
| Color | Acabat blanc |
| Material | Aluminum and Polycarbonate Plastic |
| Usos específics | Commercial, Residential, Offices, Living Rooms, Bedrooms |
| Font d'alimentació | Elèctric amb cable |
| Tipus de font de llum | LED |
| Material d'ombra | Policarbonat |
| Nombre de fonts de llum | 1 |
| Voltage | 120-277 Volts (Multi-Volt) |
| Wattage | 9W / 13W / 19W (Selectable) |
| Sortida de lumens | 750lm / 1050lm / 1500lm (Selectable) |
| Temperatura de color | 3000K / 3500K / 4000K (Seleccionable) |
| Regulabilitat | 0-10V Low Voltage Dimming (100-10% range) |
| CRI | 90 |
| Vida útil | Fins a 50,000 hores |
| Tipus de fixació | Muntatge encastat |
| Certificacions | ETL Listed (Wet Location), Energy Star Certified, IC Rated, Airtight |
| Muntatge obligatori | No |
| Forma de l'element | Ronda |

Garantia i Suport
Your Sunlite 87732-SU LED Recessed Light Fixture is backed by a Garantia limitada d'3 any from a USA-based company, ensuring quality and reliability.

For technical support, warranty claims, or further assistance, please contact Sunlite customer service. Refer to the product packaging or the official Sunlite weblloc web per obtenir la informació de contacte més actualitzada.