1. Introducció
The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.
Image 1.1: The FLAMMA FS06 Digital Preamp Pedal.
2. Contingut del paquet
- Preamplificador digital FLAMMA FS06amp Pedal
- Guia ràpida
- FLAMMA Logo Sticker
Image 2.1: Contents of the FLAMMA FS06 package.
3. Configuració i connexions
3.1 Font d'alimentació
The FS06 pedal requires a Font d'alimentació de 9 V CC with a current output of més de 303 mA. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.
3.2 Connexió del pedal
The FS06 can be integrated into various audio setups:
- To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar ampmés viu.
- Direct to a Power Ampmés viu: Connect the pedal's output directly to a dedicated power ampmés viu.
- To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.
Image 3.1: Input jack of the FS06 pedal.
Image 3.2: Output jack of the FS06 pedal.
Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.
4. Funcionament
4.1 Controlsview
The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:
- BAIX: Ajusta la resposta de baixa freqüència.
- MITJÀ: Adjusts the middle-frequency response.
- TRE (Aguts): Ajusta la resposta d'alta freqüència.
- NIVELL: Controla el volum de sortida general.
- GUANY: Adjusts the amount of overdrive/distortion.
- SAVE SELECT Button: Used to select preamp models and save presets.
- Interruptor de peu: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.
Image 4.1: Control knobs and their functions.
Image 4.2: Footswitch functionality.
4.2 Preamp Models
The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.
| Número | Nom | Amp Model Basis |
|---|---|---|
| 1 | DELUXEBLUE | Based on Fender® Blues Deluxe |
| 2 | AC31 | Based on Vox® AC30 |
| 3 | CORAL REEF | Based on Two Rock® Coral |
| 4 | PLEX 50 | Basat en Marshall® Plexi 50 |
| 5 | BLUE EYE 100 | Based on Friedman® BE-100 |
| 6 | MB 5th Gen | Based on Mesa Boogie® MARK V |
| 7 | HVE 5151 | Based on EVH® 5150 |
Imatge 4.3: acabatview of the 7 preamp models.
4.3 Desar preajustos
Cada preamp model has two channels, allowing you to save a unique preset for each. To save your settings:
- Select your desired preamp model using the SAVE SELECT button.
- Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
- Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.
This allows you to recall your customized tones instantly during performance or practice.
5. Manteniment
To ensure the longevity and optimal performance of your FLAMMA FS06 pedal, follow these maintenance guidelines:
- Neteja: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Emmagatzematge: Guardeu el pedal en un lloc sec, allunyat de temperatures extremes, llum solar directa i humitat elevada.
- Manipulació: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts.
- Potència: Always disconnect the power supply when the pedal is not in use for extended periods.
6. Solució De Problemes
6.1 No Sound or Weak Signal
- Comproveu la font d'alimentació: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
- Connexions de cable: Verify all audio cables are securely connected to the input and output jacks.
- Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your amplifier o interfície d'àudio.
- Mode bypass: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.
6.2 Unexpected Behavior
- Cicle d'alimentació: Disconnect and reconnect the power supply to reset the pedal.
- Restabliment de fàbrica: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.
7. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | FS06 |
| Pes de l'article | 10.5 unces (0.3 quilograms) |
| Dimensions del producte | 2.75 x 1.97 x 4.78 polzades (7 x 5 x 12.1 cm) |
| Tipus de material | Metall |
| Font d'alimentació | Elèctric amb cable |
| Voltage | 9 Volts DC |
| Format del senyal | Digital |
| Interfície del maquinari | Àudio d'1/4 de polzada |
| Preamp Models | 7 |
| Saveable Presets | Yes (2 channels per preamp model) |
| Cabinet Simulation | Integrat |
8. Garantia i Suport
For warranty information, technical support, or further inquiries, please visit the official FLAMMA weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
FLAMMA Official Weblloc: Visit the FLAMMA Store on Amazon