VASAGLE KDT077B01 Foldable Dining Table Instruction Manual

1. Introducció

Thank you for choosing the VASAGLE KDT077B01 Foldable Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Advertències de seguretat

• Assembly may involve small parts. Keep all components out of reach of children during assembly.
• Do not exceed the recommended maximum weight capacity of 50 kg (110 lbs) to ensure stability and prevent damage.
• Assegureu-vos que tots els cargols i elements de fixació estiguin ben ajustats abans d'utilitzar-los. Comproveu-los periòdicament i torneu-los a apretar si cal.
• Avoid standing or sitting on the table.

2. Contingut del paquet

Abans del muntatge, verifiqueu que totes les peces que s'enumeren a continuació siguin presents i no estiguin danyades. Si hi ha alguna peça que falti o estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Tabletop components (main section and drop leaves)
• Table legs (4 units)
• Assembly hardware kit (screws, bolts, washers, Allen key)
• Manual d'instruccions

3. Instruccions de muntatge

Assembly requires approximately 30-60 minutes and is recommended for dues persones. A screwdriver is the only additional tool recommended.

1. Desempaquetar i identificar les peces: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the included illustrated instructions and numbered parts to identify each piece.
2. Fixar les potes de la taula: Securely attach the four table legs to the main tabletop section using the provided screws and Allen key. Ensure all connections are firm.
3. Install Drop Leaf Mechanisms: Attach the folding support mechanisms to the underside of the main tabletop and the drop leaves as indicated in the diagram. Ensure the hinges operate smoothly.
4. Attach Drop Leaves: Connect the drop leaves to the main tabletop using the installed mechanisms. Test the folding and extending action to ensure proper alignment.
5. Ajustar els peus: The table features adjustable feet. Once assembled, place the table in its desired location and adjust the feet to ensure the table is level and stable on uneven floors.

4. Operating the Foldable Mechanism

The VASAGLE KDT077B01 table is designed for versatility, allowing you to easily adjust its size to suit your needs.

Ampliant la taula

1. Locate the drop leaves on either side of the main tabletop.
2. Gently lift one drop leaf upwards until it is level with the main tabletop.
3. Pull out the support arm located underneath the drop leaf until it locks into place, providing stable support.
4. Repeat for the other drop leaf if full extension is desired.

Plegant la taula

1. Push the support arm back underneath the drop leaf to unlock it.
2. Gently lower the drop leaf downwards until it hangs vertically alongside the table legs.
3. Repeat for the other drop leaf if a compact configuration is desired.

5. Cura i Manteniment

Proper care will help maintain the appearance and longevity of your table.

• Neteja: Netegeu la superfície de la taula amb un drap suauamp drap. Eviteu utilitzar productes químics agressius, netejadors abrasius o humitat excessiva, ja que poden danyar l'acabat.
• Vessaments: Netegeu els vessaments immediatament per evitar taques, especialment a la superfície de fusta sintètica.
• Calor i humitat: Use coasters and placemats to protect the surface from hot items and moisture.
• Llum solar: Eviteu l'exposició prolongada a la llum solar directa, que pot causar decoloració o esvaïment.
• Maquinari: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.

6. Solució De Problemes

If you encounter any issues with your table, please refer to the following common solutions:

• La taula està inestable: Ensure all assembly screws are fully tightened. Adjust the leveling feet on the bottom of each leg to compensate for uneven floor surfaces.
• Drop Leaves Not Level: Check that the support arms are fully extended and locked into place. Ensure the hinges are correctly installed and not bent.
• Dificultat per treure els adhesius: Some identification stickers may leave residue. Use a mild adhesive remover or rubbing alcohol on a soft cloth to gently clean the area. Test on an inconspicuous spot first.
• Greasy Mechanical Parts: Some mechanical parts may have a protective grease. Wipe off any excess grease with a paper towel or cloth before handling to avoid transfer.
• Peces que falten: If any parts are missing from the assembly kit, please contact VASAGLE customer support with your product model number and a description of the missing parts.

7. Especificacions del producte

8. Garantia i atenció al client

For any questions, concerns, or issues regarding your VASAGLE KDT077B01 Foldable Dining Table, please contact VASAGLE customer support. Details regarding warranty coverage can typically be found on the product packaging or the official VASAGLE weblloc.

Please have your model number (KDT077B01) and purchase information ready when contacting support to ensure efficient service.