UltraPro Z-Wave Plus Smart Light Switch (Model 54890) User Manual

1. Introducció

Thank you for choosing the UltraPro Z-Wave Plus Smart Light Switch. This device allows you to remotely control your lighting and create schedules for a wide range of fixtures when connected to a compatible Z-Wave hub. It features QuickFit and SimpleWire technologies for easier installation and enhanced reliability. This manual provides detailed instructions for installation, operation, and troubleshooting.

2. Informació de seguretat

• RISC DE DESCÀCTICA ELÈCTRICA: Electricity can cause personal injury and property damage if handled improperly. All wiring must be performed by a qualified electrician or knowledgeable person.
• DESCONNECTEU L'ALIMENTACIÓ: Always turn OFF the power to the circuit breaker or fuse box before installing or servicing this device.
• CABLE NEUTRE REQUERIT: This smart switch requires a neutral wire for proper operation. If your switch box does not have a neutral wire, consult a qualified electrician.
• NOMÉS ÚS INTERIOR: Aquest dispositiu només està dissenyat per a ús interior.
• COMPATIBILITAT: Assegureu-vos el wat totaltage of the connected load does not exceed the switch's maximum rating (120 watts).

3. Contingut del paquet

• 2 x UltraPro Z-Wave Plus Smart Light Switches
• Manual d'usuari

4. Característiques

• Disseny d'ajust ràpid: Reduced housing depth (up to 20% less than previous Z-Wave models) and elimination of heat tabs make installation easier in older or crowded switch boxes.
• Tecnologia SimpleWire: Auto-detecting line/load terminals simplify wiring by automatically identifying line and load wires. Dual offset ground ports support daisy-chaining.
• Certificat Z-Wave Plus: Ensures compatibility with all Z-Wave certified hubs and devices.
• Integrated Repeater: Amplia l'abast de la teva xarxa Z-Wave.
• Control de veu: Compatible with Google Assistant and Amazon Alexa when connected to a compatible Z-Wave hub.
• Control remot i programació: Remotely turn lights on/off and create custom schedules via your Z-Wave hub.
• Compatibilitat versàtil: Works with all LED, CFL, incandescent, and halogen bulbs, as well as other devices.

This smart switch is compatible with various bulb types, including LED, CFL, incandescent, and halogen.

5. Configuració i instal·lació

5.1 Llista de comprovació prèvia a la instal·lació

• Verify that your switch box has a neutral wire (usually white).
• Ensure the power to the switch location is OFF at the circuit breaker.
• Confirm you have basic wiring tools (screwdriver, wire strippers).

5.2 Instruccions de cablejat

The UltraPro Smart Switch features SimpleWire technology for simplified wiring. The auto-detecting line/load terminals will identify the correct wires. Dual ground ports are offset to prevent interference with mounting screws.

1. Turn OFF Power: At the circuit breaker, turn off the power to the switch box you are working on.
2. Treure l'interruptor antic: Carefully remove the existing switch from the wall box. Disconnect the wires, noting their original connections.
3. Connecteu els cables: Connect the wires from your wall box to the UltraPro Smart Switch terminals as follows:
• Cable de terra: Connect the bare copper or green wire from the wall box to the GROUND terminal.
• Fil neutre: Connect the white neutral wire from the wall box to the NEUTRAL terminal.
• Line/Load Wires: Connect the black line and load wires to the LINE/LOAD terminals. The SimpleWire technology will automatically detect which is which.
• Traveler Wire (for 3-way setups): If installing in a 3-way configuration, connect the traveler wire to the TRAVELER terminal. (Requires an UltraPro add-on switch #39350, sold separately).
4. Interruptor segur: Carefully fold the wires and push the switch into the wall box. Secure it with the provided screws.
5. Instal·leu la placa de paret: Attach the wallplate (sold separately).
6. Restaura l'alimentació: Turn ON the power at the circuit breaker. The blue LED on the switch should illuminate.

Wiring diagram for the UltraPro Z-Wave Plus Smart Switch, illustrating connections for ground, line/load, traveler, and neutral wires.

The switch supports both single-pole and multi-switch (3-way) configurations. Multi-switch setups require an UltraPro add-on switch (sold separately).

5.3 Dimensions

Physical dimensions of the UltraPro Smart Switch, including depth, width, and height, shown in both inches and millimeters. Note the SmartStart QR code for easy pairing.

6. Instruccions de funcionament

6.1 Control manual

• Activar: Press the top of the paddle switch.
• DESACTIVAR: Press the bottom of the paddle switch.

6.2 Z-Wave Integration (Pairing)

To integrate your smart switch into your Z-Wave network, you will need a compatible Z-Wave hub. The switch supports SmartStart for simplified pairing.

1. Activa el mode de vinculació: Put your Z-Wave hub into inclusion or pairing mode. Refer to your hub's instruction manual for specific steps.
2. SmartStart (Recommended): If your hub supports SmartStart, scan the QR code located on the switch or its packaging. The switch will automatically pair with your hub. The Device Specific Key (DSK) is also printed near the QR code for manual entry if needed.
3. Inclusió manual: If SmartStart is not available, initiate manual inclusion on your Z-Wave hub. Then, quickly press the top or bottom paddle of the UltraPro switch once. The LED indicator will flash to confirm inclusion.
4. Confirmació: Your Z-Wave hub should confirm successful pairing. You can now control the switch through your hub's interface.

6.3 Control de veu

Once successfully paired with a Z-Wave hub that supports Amazon Alexa or Google Assistant integration, you can use voice commands to control your lights.

1. Connect Hub to Voice Assistant: Follow your Z-Wave hub's instructions to link it with your Amazon Alexa or Google Assistant account.
2. Descobriu els dispositius: Use the voice assistant app to discover new devices. Your UltraPro Smart Switch should appear.
3. Comandaments de veu: Ara podeu utilitzar ordres com ara:
• "Alexa, encén el llum de la sala d'estar."
• "Ei Google, apaga el llum de la cuina."

Control your UltraPro Smart Switch using voice commands with Amazon Alexa or Google Assistant, requiring a compatible Z-Wave hub.

6.4 Remote Control and Custom Scenes

Through your Z-Wave hub's application, you can control your lights from anywhere and create custom scenes.

• Control des de qualsevol lloc: Use your smartphone, tablet, or PC to turn lights on or off, or adjust schedules, even when you're away from home.
• Escenes personalitzades: Program groups of hardwired fixtures for specific events, times, or moods. For example, a "Movie Night" scene could dim the lights, or a "Good Morning" scene could gradually brighten them.

Control your lighting from any smart device, including smartphones, tablets, or PCs, from any location.

Create custom scenes to program groups of hardwired fixtures for entertaining, events, or specific times.

7. Manteniment

The UltraPro Smart Light Switch requires minimal maintenance. To clean, gently wipe the surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. There are no user-serviceable parts inside the switch.

8. Solució De Problemes

• La llum no s'encén/s'apaga:
  • Assegureu-vos que es restableixi el corrent a l'interruptor.
  • Check wiring connections to ensure they are secure and correct (Line, Load, Neutral, Ground).
  • Verify the bulb is working and properly installed.
• Switch does not pair with Z-Wave hub:
  • Ensure your Z-Wave hub is in inclusion/pairing mode.
  • Try moving the hub closer to the switch during pairing.
  • Reset the switch: With the switch LED glowing, quickly press the top paddle three times, then the bottom paddle three times. The LED will flash to confirm reset. Then attempt pairing again.
  • If using SmartStart, ensure the QR code is scanned correctly.
• El comandament a distància no funciona:
  • Confirm the switch is successfully paired with your Z-Wave hub.
  • Check your Z-Wave network's health and signal strength. The switch acts as a repeater, but obstacles can still affect communication.
  • Ensure your Z-Wave hub has internet connectivity if controlling remotely.

9. Especificacions

10. Garantia

UltraPro products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the manufacturer's official weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

11. Suport

If you encounter any issues or have questions regarding the UltraPro Z-Wave Plus Smart Light Switch, please refer to the troubleshooting section of this manual or contact UltraPro customer support. Contact information can typically be found on the product packaging or the manufacturer's weblloc.