1. Acabatview
The Hantek DSO2C10 is a dual-channel digital storage oscilloscope designed for precise electrical testing and signal analysis. It features a 100MHz bandwidth, 1GSa/s sampling rate, and 8M memory depth, making it suitable for a wide range of applications. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Figura 1.1: Frontal view of the Hantek DSO2C10 Digital Storage Oscilloscope.
2. Configuració
2.1 Desembalatge i inspecció
Carefully unpack the oscilloscope and all accessories. Verify that all components listed in the packing list are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
2.2 Connexió d'alimentació
Connect the provided AC power adapter to the oscilloscope's power input port and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting. The device operates on AC power.
2.3 Connexió de la sonda
Connect the test probes to the BNC input channels (CH1, CH2) on the front panel. Ensure a secure connection. For accurate measurements, always perform probe compensation before use.
Figure 2.1: Labeled front panel indicating Analog Channel Input Signal (CH1, CH2) and other controls.
2.4 Dimensions físiques
The oscilloscope measures approximately 12.44 x 4.33 x 5.91 inches (L x W x H) and weighs 1 kilogram. Its compact design allows for convenient placement on a workbench or in a handheld setup.
Figura 2.2: Diversos views of the oscilloscope, highlighting its compact form factor.
3. Instruccions de funcionament
3.1 Funcionament bàsic
The DSO2C10 features two independent channels, each controlled by dedicated knobs for vertical and horizontal adjustments. The LCD display provides a clear view of waveforms and measurement data.
- Ample de banda: 100 MHz analog channel bandwidth.
- SampTarifa de ling: Up to 1 GSa/s.
- Profunditat de memòria: 8M for capturing detailed waveforms.
- Interval vertical: 2mV/div to 10V/div.
- Resolució vertical: 8 bits.
3.2 Trigger Functions
The oscilloscope supports various trigger types to stabilize and capture specific events:
- Disparador de vora
- Activador de pols
- Activador de vídeo
- Slope Trigger
- Overtime Trigger
- Window Trigger
- Pattern Trigger
- Interval Trigger
- Sota Amp Disparador
- Bus Decode and Protocol Analysis: UART, LIN, CAN, SPI, IIC.
3.3 Measurement Features
The device offers 32 types of automatic measurements with real-time statistics, including maximum, minimum, and standard deviation. It also includes a 3-digit digital voltage meter and a 6-digit hardware frequency indicator.
Figure 3.1: Oscilloscope display showing various waveforms and measurement parameters.
Figura 3.2: Detallada view of the 32 automatic measurement display.
3.4 Emmagatzematge de dades i connectivitat
The oscilloscope can save multiple data formats, such as settings, waveforms, reference waveforms, CSV files, and pictures. It supports USB Host/Device connectivity for data transfer.
3.5 Demostració en vídeo
Watch this video for a practical demonstration of the Hantek Handheld Oscilloscope's capabilities, including CAN bus signal analysis.
Video 3.1: Demonstration of Hantek Handheld Oscilloscope (DSO2C10, DSO2C15, DSO2D10, DSO2D15) features and CAN bus signal analysis. Provided by Yuqiao--Store.
4. Manteniment
4.1 Neteja
Regularly clean the exterior of the oscilloscope with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the casing or screen. Ensure the device is powered off and disconnected from all power sources before cleaning.
4.2 Emmagatzematge
When not in use, store the oscilloscope in a dry, dust-free environment away from direct sunlight and extreme temperatures. Protect the screen and input connectors from physical damage.
4.3 Cura de la bateria
If your model includes a rechargeable battery, ensure it is charged periodically even during long storage periods to maintain battery health.
5. Solució De Problemes
This section addresses common issues you might encounter with your Hantek DSO2C10 oscilloscope. For problems not listed here, please contact customer support.
5.1 No Display or Power
- Check if the power adapter is securely connected to both the oscilloscope and the power outlet.
- Comproveu que l'interruptor d'alimentació estigui a la posició ON.
- Assegureu-vos que la presa de corrent funcioni.
5.2 Unstable Waveform
- Adjust the trigger level and trigger mode to stabilize the waveform.
- Check probe connections for looseness or damage.
- Perform probe compensation.
5.3 Incorrect Measurements
- Ensure probes are correctly calibrated and compensated.
- Verify the vertical and horizontal scale settings match the signal characteristics.
- Comproveu la connexió a terra adequada.
6. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Hantek |
| Model | DSO2C10 (DSO2000 Series) |
| Canals | 2 |
| Ample de banda | 100 MHz |
| SampTarifa ling | Up to 1 GSa/s |
| Profunditat de memòria | 8M |
| Interval vertical | 2 mV / div ~ 10V / div |
| Resolució vertical | 8 bits |
| Generador de formes d'ona | Built-in 1 CH 25MHz (DSO2D10, DSO2D15 models only) |
| Tipus de disparador | Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC |
| Bus Decode & Analysis | RS232/UART, I2C, SPI, CAN, LIN |
| Formats de dades | Settings, Waveforms, Reference Waveforms, CSV, Pictures |
| Digital Voltage Mesurador | 3 dígits |
| Hardware Frequency Indicator | 6 dígits |
| Mesures automàtiques | 32 types with statistics |
| Connectivitat | USB Host/Device |
| Font d'alimentació | AC |
| Pes de l'article | 1 quilograms |
| Dimensions de l'article (L x A x A) | 12.44 x 4.33 x 5.91 polzades |
7. Garantia i Suport
7.1 Informació de la garantia
The Hantek DSO2C10 Digital Storage Oscilloscope comes with a 1 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Conserveu el comprovant de compra per a reclamacions de garantia.
7.2 Suport tècnic
For technical assistance, troubleshooting, or service inquiries, please contact Hantek customer support. Refer to the contact information provided in your product packaging or visit the official Hantek weblloc web per obtenir els recursos de suport més actualitzats.