1. Introducció
Thank you for choosing the KUNPHY 350ml Ultrasonic Cleaner. This device utilizes high-frequency ultrasonic waves (46,000 Hz) to provide thorough and gentle cleaning for various items without causing damage. The ultrasonic vibrations, combined with a gentle water flow, effectively remove hidden dirt and grime from intricate surfaces. This manual provides essential information for the safe and efficient operation of your ultrasonic cleaner.
2. Instruccions de seguretat
- Llegiu totes les instruccions abans d'utilitzar l'aparell.
- No submergiu la unitat principal en aigua o altres líquids.
- Assegureu-vos que el cable d'alimentació no estigui danyat i que estigui connectat correctament a una presa de corrent amb connexió a terra.
- Mantenir fora de l'abast dels nens.
- Do not operate the cleaner without liquid in the tank.
- Desendolleu el dispositiu quan no l'utilitzeu i abans de netejar-lo.
- Avoid cleaning scratched or cracked glasses/sunglasses, as ultrasonic cleaning may worsen existing damage.
- Do not disassemble or attempt to repair the unit yourself. Contact customer support for assistance.
3. Producte acabatview
3.1 Components
- Ultrasonic Cleaner Unit (with 304 stainless steel tank)
- Tapa transparent
- Power Adapter (integrated or separate, depending on model)
- Watch Stand (included for specific items)
3.2 Característiques
- Neteja ultrasònica eficaç: 46,000 Hz frequency for deep cleaning.
- Capacitat generosa: 350ml stainless steel tank, suitable for various items.
- Operació senzilla: One-button ON/OFF control.
- Apagat automàtic: Device automatically turns off after a cleaning cycle (typically 3 minutes).
- Construcció duradora: 304 stainless steel interior for corrosion resistance.
- Disseny estable: Non-slip silicone strip on the bottom for stability and noise reduction.
- Ús versàtil: Ideal for jewelry, watches, glasses, dentures, electric shaver heads, makeup brushes, combs, and more.
Image 1: KUNPHY 350ml Ultrasonic Cleaner showing its compact design and items it can clean.
Image 2: Versatility of the KUNPHY Ultrasonic Cleaner for various items including watches, dentures, and jewelry.
4. Configuració
- Col·locació: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure it is near a power outlet.
- Connexió d'alimentació: Connecteu l'adaptador d'alimentació a una presa de corrent adequada.
- Omplir el dipòsit: Open the lid and fill the stainless steel tank with tap water. Do not exceed the maximum fill line. For enhanced cleaning, a small amount of dish soap or a specialized ultrasonic cleaning solution can be added.
Image 3: Visual guide for filling the tank and placing items.
5. Instruccions de funcionament
- Preparar els elements: Ensure items to be cleaned are suitable for ultrasonic cleaning. For watches, use the included watch stand if applicable.
- Col·locar elements: Carefully place the items into the water in the stainless steel tank. Ensure items are fully submerged but not overcrowded.
- Comença a netejar: Close the lid and press the ON/OFF button to start the cleaning cycle. The device will begin operating, and you may hear a gentle humming sound.
- Apagat automàtic: The cleaner will automatically stop after approximately 3 minutes.
- Inspect and Repeat: After the cycle, open the lid and carefully remove the cleaned items. Rinse them under clean water and dry with a soft cloth. If items are still dirty, you may repeat the cleaning cycle.
- Buidar i netejar: After use, unplug the device, empty the water from the tank, and wipe the tank and exterior clean.
Image 4: Demonstration of cleaning effectiveness on glasses.
Image 5: Demonstration of cleaning effectiveness on jewelry.
6. Manteniment
- Neteja del dipòsit: After each use, empty the water and wipe the stainless steel tank with a soft cloth. Do not use abrasive cleaners or harsh chemicals.
- Neteja exterior: Netegeu l'exterior del bloc amb l'anunciamp cloth. Ensure no water enters the electronic components.
- Emmagatzematge: Store the cleaner in a cool, dry place away from direct sunlight and moisture when not in use.
- Descalcificació: If mineral deposits build up in the tank, use a mild descaling solution or vinegar diluted with water, run a short cycle, then rinse thoroughly.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén. | Sense font d'alimentació. | Comproveu si el cable d'alimentació està ben connectat a la unitat i a la presa de corrent. Assegureu-vos que la presa de corrent funciona. |
| La neteja no és efectiva. | Insufficient water or cleaning solution; items too dirty; items overcrowded. | Ensure tank is filled to the appropriate level. Add a small amount of cleaning solution. Clean fewer items at a time. Run multiple cycles if necessary. |
| Soroll inusual durant el funcionament. | Unit not on a flat surface; tank empty. | Place the unit on a stable, flat surface. Ensure the tank is filled with water. |
8. Especificacions
- Número de model: Mor-DE-UC-BCM-187
- Fabricant: SWX
- Capacitat: 350 ml
- Freqüència d'ultrasons: 46,000 Hz
- Potència: 18 watts-hora
- Material: PTFE (Polytetrafluoroethylene), 304 Stainless Steel
- Color: Blanc
- Dimensions del paquet: 31 x 11.2 x 7.9 cm
- Pes: 680 grams
- Components inclosos: Ultrasonic cleaner unit, watch stand
- Bateries necessàries: No
- Data de primera disponibilitat: 15 d'abril de 2022
9. Atenció al client
For any questions, concerns, or technical assistance regarding your KUNPHY Ultrasonic Cleaner, please contact our customer service. We aim to provide high-quality support to ensure your satisfaction.
