BONTEC GDM01 Single Monitor Arm Instruction Manual for 13-27 inch LCD LED Screens

Introducció

Thank you for choosing the BONTEC GDM01 Single Monitor Arm. This manual provides essential information for the safe and correct installation, operation, and maintenance of your monitor arm. Please read these instructions carefully before assembly and keep them for future reference.

The BONTEC GDM01 is designed to support LCD LED screens ranging from 13 to 27 inches, with a maximum weight capacity of 6.5 kg (14.3 lbs). It features a gas spring for smooth height adjustment and offers full motion flexibility, including tilt, swivel, and rotation, to achieve an ergonomic viewposició d'ingrés.

Informació de seguretat

Assegureu-vos que tots els components siguin presents i no estiguin danyats abans del muntatge. No utilitzeu peces danyades.
No supereu la capacitat màxima de pes de 6.5 kg (14.3 lliures).
Ensure the mounting surface (desk) is strong enough to support the combined weight of the monitor arm and your monitor.
Tighten all screws firmly but do not overtighten. Overtightening can damage the product.
Always use two people for heavy lifting or when attaching the monitor to the arm.
Keep children away from small parts that could be swallowed.
If you have any questions or encounter difficulties, contact customer support.

Contingut del paquet

Si us plau, verifiqueu que totes les peces estiguin incloses al paquet:

Conjunt del braç del monitor
Escriptori Clamp Component
Grommet Mount Component
Placa VESA
Kit de ferramenta (cargols, volanderes, claus Allen)
Manual d'instruccions

Configuració i instal·lació

The BONTEC GDM01 monitor arm offers two installation methods: desk clamp i muntatge de grommet.

Method 1: Desk Clamp Instal·lació

Adjunteu el Clamp Base: Assegureu-vos el C-clamp to the edge of your desk. Ensure the desk thickness is between 10mm and 83mm. Tighten the clamp screw until the base is firmly attached to the desk.
Enganxeu el braç: Slide the monitor arm assembly onto the pole of the clamp base. Secure it with the provided screws or locking mechanism.
Col·loqueu la placa VESA al monitor: Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm). Use the appropriate screws from the hardware kit to secure the plate to the monitor.
Muntar el monitor al braç: Carefully slide the monitor (with VESA plate attached) onto the arm's mounting head. The open top slots on the VESA plate make this process easier. Ensure it clicks into place or is secured with the locking screw.

Two installation methods: desk clamp and grommet mount — Image: Two installation methods for the monitor arm: desk clamp i muntatge de grommet.

VESA plate with open top slots for easy monitor mounting — Image: The VESA plate features open top slots for simplified monitor attachment.

Method 2: Grommet Mount Installation

Prepare Grommet Hole: Ensure your desk has a grommet hole. If not, you may need to drill one (consult a professional if unsure).
Insert Grommet Base: Place the grommet base through the hole. Secure it from underneath the desk with the provided plate and nut.
Enganxeu el braç: Slide the monitor arm assembly onto the pole of the grommet base. Secure it with the provided screws or locking mechanism.
Col·loqueu la placa VESA al monitor: Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm). Use the appropriate screws from the hardware kit to secure the plate to the monitor.
Muntar el monitor al braç: Carefully slide the monitor (with VESA plate attached) onto the arm's mounting head. Ensure it clicks into place or is secured with the locking screw.

Operating and Adjusting the Monitor Arm

The BONTEC GDM01 monitor arm offers extensive adjustability for optimal viewing comfort and ergonomics.

Tension Adjustment (Gas Spring)

The built-in gas spring allows for smooth and effortless height adjustment. The tension needs to be adjusted according to the weight of your monitor.

If the monitor arm sags or cannot hold the monitor's weight, turn the bolt clockwise to increase gas spring tension.
If the monitor arm is too stiff or difficult to move downwards, turn the bolt counter-clockwise to decrease tension.

Monitor arm with gas spring tension adjustment using an Allen key — Image: Adjusting the gas spring tension with an Allen key to support the monitor's weight.

Ajust d'alçada

Once the gas spring tension is correctly set, you can easily raise or lower your monitor to the desired height. The arm allows for a height adjustment range from 155mm to 400mm.

Ergonomic posture with monitor at eye level versus poor posture with monitor too low — Image: Proper ergonomic setup with the monitor at eye level, preventing neck and shoulder strain.

Tilt, Swivel, and Rotation

Inclinació: Adjust the monitor tilt from -45° to +90° to reduce glare and find your preferred viewangle de ing.
Girar: The arm allows for 180° swivel at the base and 250° swivel at the joint, enabling you to share your screen or change viewdirecció.
Rotació: Gireu el monitor 360° per a l'orientació horitzontal o vertical.

Monitor rotating 360 degrees on the arm — Image: Monitor rotation capability, allowing for both landscape and portrait orientations.

Monitor tilting up and down on the arm — Image: Monitor tilt adjustment for optimal viewing angle and glare reduction.

Monitor arm swiveling at the joint — Image: Swivel functionality at the arm's joint for flexible screen positioning.

Gestió de cables

The integrated cable management system helps keep your workspace tidy. Route your monitor cables along the arm and through the designated clips or channels to conceal them.

Monitor arm with cables routed through integrated management system — Image: Integrated cable management system routing monitor cables along the arm for a clean workspace.

Manteniment

Reviseu regularment tots els cargols i connexions per assegurar-vos que estiguin ben ajustats.
Netegeu el braç del monitor amb un drap suau iamp drap. Eviteu productes de neteja o dissolvents abrasius.
No intenteu desmuntar el mecanisme de la molla de gas.

Resolució de problemes

Problema	Causa possible	Solució
Vigila si els braços s'enfonsen o no es mantenen drets.	La tensió de la molla de gas és massa baixa per al pes del monitor.	Increase gas spring tension by turning the adjustment bolt clockwise with the provided Allen key.
El braç del monitor és massa rígid per moure's.	La tensió de la molla de gas és massa alta.	Decrease gas spring tension by turning the adjustment bolt counter-clockwise with the provided Allen key.
El monitor tremola al braç.	VESA plate screws or arm connection screws are loose.	Ensure all VESA plate screws and arm connection screws are securely tightened.
Escriptori clamp no és estable.	Clamp not tightened sufficiently or desk surface is uneven.	Retighten the desk clamp. Ensure the desk surface is flat and stable. Consider using the grommet mount if the clamp és inadequat.

Especificacions

Model: GDM01
Material: Acer d'aliatge
Compatibilitat de la mida de la pantalla: 13 - 27 polzades
Capacitat de pes: 6.5 kg (14.3 lliures)
Compatibilitat VESA: 75x75mm, 100x100mm
Interval d'ajust d'alçada: 155 mm - 400 mm
Extensió del braç: Fins a 525 mm
Rang inclinat: -45° a +90°
Interval de rotació: 180° (base), 250° (joint)
Rotació: 360°
Escriptori Clamp Gruix: 10 mm - 83 mm

Specifications for monitor arm: fits 13-27 inch, 6.5kg capacity, VESA 75x75 and 100x100 — Image: Key specifications including screen size compatibility, weight capacity, and VESA standards.

Garantia i Suport

BONTEC products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BONTEC website. Please have your model number (GDM01) and purchase details ready when contacting support.

Fabricant: BONTEC

BONTEC GDM01