Berserker 45HM SDS-Max Demolition Hammer User Manual

1. Introducció

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Berserker 45HM SDS-Max Demolition Hammer. Please read these instructions carefully before using the tool to ensure proper function and user safety. The Berserker 45HM is designed for demolition, chipping, and breaking applications in concrete, block, brick, tile, and stucco. It features a powerful 1300W motor and an SDS-Max bit system for efficient material removal.

2. Instruccions generals de seguretat

Always observe the following safety precautions when operating the demolition hammer to prevent electric shock, fire, and serious injury.

• Seguretat de l'àrea de treball: Mantingueu la zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden als accidents. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Els endolls de les eines elèctriques han de coincidir amb la presa de corrent. No modifiqueu mai l'endoll de cap manera. No maltracteu el cable. No utilitzeu mai el cable per transportar, estirar o desconnectar l'eina elèctrica. Mantingueu el cable allunyat de la calor, l'oli, les vores afilades o les peces mòbils.
• Seguretat personal: Always wear eye protection (safety goggles) and hearing protection (earplugs or earmuffs). Use a dust mask if operations create dust. Wear heavy-duty gloves. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica correcta per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques. Guardeu les eines elèctriques inactives fora de l'abast dels nens i no permeteu que persones que no estiguin familiaritzades amb l'eina elèctrica o amb aquestes instruccions la facin funcionar.
• Specific Demolition Hammer Safety: The Berserker 45HM has a "hammer only" function and "variable-lock positioning" function. NO DRILLING function is available. Adapts only to SDS-Max type chisels. Be aware of hidden electrical wires, water pipes, or gas lines when working on walls or floors.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• 1 x Berserker 45HM Demolition Hammer
• 1 x SDS-Max Flat Chisel
• 1 x SDS-Max Point Chisel
• 1 x Grease container
• 1 x clau anglesa
• 1 x Maletí de transport
• 1 x Set of Replaceable Carbon Brushes
• 1 x Manual d'usuari (aquest document)

Image: Berserker 45HM Demolition Hammer with its components and accessories, including SDS-Max chisels, carbon brushes, grease, and a wrench.

4. Característiques del producte

• Motor potent: Equipped with a 1300W (11 AMP) motor, delivering 4,100 BPM and 11.1 ft.lbs. (15 Joules) of impact energy for efficient demolition.
• Disseny lleuger: Weighs approximately 5.4 kilograms (12 pounds), facilitating both horizontal and vertical concrete demolition applications.
• SDS-Max Bit System: Provides tool-free bit changes with automatic bit locking, dust protection, and maximum impact energy transfer.
• Botó de bloqueig: Allows continuous operation without holding the trigger, enhancing user comfort during extended use.
• Disseny ergonòmic: Features a 360° adjustable accessory handle and an ergonomic grip area for various work positions.
• Posicionament Vario-Lock: Allows rotation and locking of chisels into 12 different positions to optimize the working angle, providing maximum comfort in tight spaces.
• Triple Vibration Control: Incorporates upgraded Anti-Vibration Technology, a longer air cushion in the hammer mechanism, and a spring-loaded vibration-absorbing rear handle to reduce fatigue and improve performance.
• External Grease Filler: For convenient lubrication and maintenance.
• Raspalls de carbó reemplaçables: Ensures extended tool life and easy maintenance.

Image: The Berserker 45HM Demolition Hammer in use, highlighting its 11.1 ft.lbs. impact energy for effective demolition.

Image: Illustration emphasizing the lightweight design of the Berserker 45HM, weighing only 12 lbs, suitable for various demolition tasks.

Imatge: Primer pla view of the Berserker 45HM's Dual Anti-Vibration System, showing spring compression and bounce mechanisms for reduced vibration.

Imatge: Interna view of the Berserker 45HM's extended cylinder, designed to improve impact performance.

Image: Diagram illustrating the Berserker 45HM's all-copper motor, highlighting its 1300W power, stable load, and increased impact performance.

5. Configuració

5.1 Attaching the Adjustable Handle

1. Afluixa el clamp on the 360° adjustable handle.
2. Slide the handle onto the front barrel of the demolition hammer.
3. Position the handle to a comfortable and secure working angle.
4. Apretar el clamp firmly to secure the handle in place.

5.2 Inserting SDS-Max Chisels

1. Assegureu-vos que l'eina estigui desconnectada de la font d'alimentació.
2. Clean the shank of the SDS-Max chisel and apply a small amount of grease to it.
3. Estireu el collar del mandril de l'eina.
4. Insert the chisel into the chuck until it clicks into place. The SDS-Max system allows for tool-free bit changes.
5. Release the chuck collar. Pull on the chisel to ensure it is securely locked. There will be a small amount of play, which is normal for SDS-Max systems.
6. To remove the chisel, pull back the chuck collar and pull the chisel out.

6. Instruccions de funcionament

The Berserker 45HM is designed for hammer-only operations. It does not support drilling functions.

Image: Graphic indicating that the Berserker 45HM Demolition Hammer operates in "Hammer Only" mode.

6.1 Engegada/apagada

1. Connecteu el cable d'alimentació a una presa de corrent de 230 V CA adequada.
2. Per iniciar l'eina, premeu l'interruptor ON/OFF.
3. To stop the tool, release the ON/OFF switch.

6.2 Using the Lock-On Button

For continuous operation, press the ON/OFF switch and then press the lock-on button. The tool will continue to run without holding the switch. To disengage the lock-on function, press the ON/OFF switch again.

6.3 Posicionament Vario-Lock

The vario-lock system allows you to adjust the angle of your chisel. To change the chisel angle:

1. Assegureu-vos que l'eina estigui desendollada.
2. Rotate the chuck collar to the "Vario-Lock" position (indicated by an arrow or specific symbol).
3. Rotate the chisel to the desired angle (up to 12 different positions).
4. Rotate the chuck collar back to the "Hammer" position to lock the chisel angle.

6.4 Demolition Techniques

• Subjecteu sempre l'eina fermament amb les dues mans.
• Apply steady, moderate pressure. Do not lean heavily on the tool; let the hammer mechanism do the work.
• Start chipping at the edge of the material or at pre-drilled holes for easier breaking.
• Work in small sections to maintain control and prevent material from falling unexpectedly.

7. Manteniment

Regular maintenance ensures the longevity and optimal performance of your demolition hammer. Always unplug the tool before performing any maintenance.

7.1 Lubrication (Greasing)

The Berserker 45HM features an external grease filler for easy lubrication. Refer to the included grease container for recommended type and frequency. Typically, grease should be applied every 40-50 hours of operation or as needed.

1. Locate the external grease filler cap on the tool body.
2. Desenrosqueu la tapa.
3. Using the provided grease or a suitable equivalent, inject a small amount of grease into the opening. Do not overfill.
4. Replace and tighten the cap securely.

7.2 Substitució de les escombretes de carbó

Carbon brushes wear down over time and need replacement to maintain motor performance. The tool is supplied with a replaceable set of carbon brushes.

1. Localitzeu les tapes de les escombretes de carbó als costats de la carcassa del motor.
2. Using a screwdriver or the provided wrench, unscrew the caps.
3. Traieu amb cura les escombretes de carbó antigues.
4. Introduïu les noves escombretes de carbó, assegurant-vos que estiguin orientades correctament.
5. Replace and tighten the carbon brush caps.
6. After replacement, run the tool without load for a few minutes to allow the new brushes to seat properly.

7.3 Neteja i emmagatzematge

• After each use, clean the tool with a dry cloth to remove dust and debris. Do not use water or solvents.
• Inspeccioneu el cable d'alimentació per detectar qualsevol dany.
• Store the demolition hammer in its carrying case in a dry, secure place, out of reach of children.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

10.1 Informació de la garantia

The Berserker 45HM Demolition Hammer comes with a 24-month warranty service from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear of consumable parts like carbon brushes or chisels. Please retain your proof of purchase for warranty claims.

10.2 Atenció al client

For technical assistance, warranty claims, or to order replacement parts, please contact Berserker customer support. Please have your model number (45HM) and purchase details ready when contacting support.

Informació de contacte:

• Weblloc: www.berserker.com (Example, replace with actual if available)
• Correu electrònic: support@berserker.com (Example, replace with actual if available)
• Telèfon: +1-XXX-XXX-XXXX (Example, replace with actual if available)