Lightkiwi J4070 Wireless Dimmer Switch

Introducció

The Lightkiwi J4070 Wireless Dimmer Switch provides convenient control over Lightkiwi modular LED under cabinet lighting systems. This system includes a dial remote control and a receiver unit, allowing users to wirelessly adjust the power and brightness of their lighting. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

Informació de seguretat

• This product is designed for use with Lightkiwi modular LED under cabinet lighting systems. Ensure compatibility before connecting to other products.
• Comproveu que el vol operatiutage of your lighting system is within the specified range of 12-24V DC.
• Do not exceed the maximum load rating of 6A (12V:<72W, 24V:<144W).
• Ensure correct battery polarity when installing AAA batteries in the remote control.
• Mantingueu el dispositiu allunyat de l'aigua i de la humitat excessiva.
• No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb el servei d'assistència si sorgeixen problemes.

Contingut del paquet

• 1 x Lightkiwi Wireless Dial Remote Control
• 1 x Lightkiwi RF Remote Receiver
• Note: 2 x AAA batteries are required for the remote control and are not included.

Producte acabatview

The Lightkiwi J4070 system consists of two main components: the wireless dial remote control and the RF remote receiver.

Wireless Dial Remote Control

Image: The Lightkiwi J4070 wireless dial remote control, a compact, circular device with a silver top and black base.

This dial-shaped remote allows for intuitive control of your lighting. It features a push-button function for power on/off and a rotational function for dimming. Its wireless capability provides flexibility in placement.

RF Remote Receiver

Image: The Lightkiwi RF remote receiver with input and output cables. It is a small black rectangular unit with connectors on both ends.

The receiver unit connects between your power supply and the LED lighting system. It receives signals from the wireless dial remote control to manage the power and brightness of the connected lights.

Configuració

1. Install Batteries in Remote Control

Image: A four-panel image showing the Lightkiwi dial remote control being opened to reveal the battery compartment, where two AAA batteries are inserted. The bottom right panel explicitly states "*Battery Not Included."

1. Gently twist the top silver part of the dial remote counter-clockwise to separate it from the black base.
2. Insert two (2) AAA batteries into the battery compartment, ensuring correct polarity (+/-).
3. Align the top silver part with the black base and twist clockwise to secure it.

2. Connect the RF Remote Receiver

1. Locate your plug-in power supply for the LED under cabinet lighting system.
2. Connect the male connector of your power supply to the female input connector of the RF remote receiver.
3. Connect the male output connector of the RF remote receiver to the female input connector of your Lightkiwi modular LED under cabinet lighting (or a splitter if used).
4. Assegureu-vos que totes les connexions siguin segures.

3. Mounting the Remote Control (Optional)

The remote control can be mounted using the included 3M double-sided adhesive tape on the back of the black base. Ensure the mounting surface is clean and dry for optimal adhesion.

Instruccions de funcionament

Image: The Lightkiwi dial remote control with blue arrows indicating its functions: a downward arrow for pressing, and curved arrows for rotating left and right.

1. Encès/apagat: Short-click (press and release) the top of the dial remote control to turn the connected LED lighting system on or off.
2. Ajusta la brillantor:
   • Rotate the dial remote control clockwise to increase the brightness of the lights.
   • Rotate the dial remote control counter-clockwise to decrease the brightness of the lights.

Manteniment

• Neteja: Netegeu el comandament a distància i el receptor amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Substitució de la bateria: When the remote control's range or responsiveness decreases, replace the AAA batteries as described in the Setup section.
• Emmagatzematge: If storing the device for an extended period, remove the batteries from the remote control to prevent leakage.

Resolució de problemes

• Els llums no s'encenen/apaguen:
  • Check if the remote control batteries are installed correctly and are not depleted. Replace if necessary.
  • Ensure all connections between the power supply, receiver, and LED lights are secure.
  • Verify that the power supply is functioning and providing power to the system.
• Lights not dimming:
  • Confirm that the remote control batteries are fresh.
  • Ensure the remote control is within the effective wireless range (up to 98ft/30m) of the receiver.
  • Check for any obstructions between the remote and receiver that might interfere with the signal.
• Control intermitent:
  • Substituïu les piles del comandament a distància.
  • Relocate the receiver or remote to minimize interference from other wireless devices.

Especificacions

Dimensions

Image: Dimensions of the Lightkiwi dial remote control, showing a height of 1.2 inches and a diameter of 2.3 inches.

Image: Dimensions of the Lightkiwi RF remote receiver, showing the main unit as 1.9 inches long and 1.0 inch wide, with cables extending 4.5 inches from each side.

Garantia i Suport

For warranty information or technical support, please contact Lightkiwi customer service. Refer to the product packaging or the Lightkiwi official weblloc per obtenir dades de contacte.