Manual d'usuari de la bomba submergible DEKO de 400 W

1. Introducció

Thank you for choosing the DEKO 400W Submersible Pump. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your pump. Please read this manual thoroughly before use and keep it for future reference.

Figure 1: DEKO 400W Submersible Pump. This image shows the overall design of the pump, featuring its blue and white casing, integrated handle, float switch, and outlet connection.

2. Instruccions de seguretat

Observeu sempre les següents precaucions de seguretat per reduir el risc de lesions o danys:

• Seguretat elèctrica: Ensure the power supply matches the pump's specifications (240V). Always connect to a grounded outlet. Do not operate with damaged cables or plugs.
• Seguretat de l'aigua: Never operate the pump out of water. Do not use the pump for flammable, explosive, or corrosive liquids.
• Seguretat personal: Keep hands, feet, and clothing away from moving parts. Disconnect power before performing any maintenance or cleaning.
• Nens i animals de companyia: Mantingueu els nens i les mascotes lluny de la zona d'operacions.
• Temperatura: Do not pump liquids above 35°C (95°F).

3. Components del producte

Familiarize yourself with the main parts of your DEKO Submersible Pump:

Figure 2: Key components of the DEKO Submersible Pump. This diagram labels the cable, pump handle, output tie-in, float switch, and water suction port.

• Mànec de la bomba: For easy carrying and lowering the pump into water.
• Interruptor de flotador: Automatically starts and stops the pump based on water level.
• Output Tie-in: Connection point for the discharge hose.
• Water Suction Port: Located at the base, where water enters the pump.
• Cable de corrent: Connecta la bomba a la xarxa elèctrica.

4. Configuració i instal·lació

4.1 Connexió de la mànega

The pump supports multiple hose sizes: 1 inch, 1-1/4 inch, G1 inch, and G1-1/2 inch. Choose the appropriate adapter for your hose.

1. Attach the desired hose adapter to the output tie-in.
2. Secure the discharge hose to the adapter using a hose clamp or by threading it if applicable.

4.2 Col·locació

Place the pump on a stable, flat surface in the water. Ensure the float switch can move freely and is not obstructed by obstacles.

Figure 3: The DEKO Submersible Pump operating in a body of water. This image demonstrates the pump's intended use, showing it partially submerged with the float switch and discharge hose visible.

5. Instruccions de funcionament

5.1 Automatic Operation (Float Switch)

The pump is equipped with an automatic float switch for hands-free operation.

• When the water level rises and lifts the float switch to approximately 50 cm, the pump will automatically start.
• When the water level drops and the float switch falls to approximately 25 cm, the pump will automatically stop to prevent dry running.

Figure 4: Diagram illustrating the float switch's working and stop states. The pump starts when the float switch is lifted (water level at or above 50cm) and stops when it drops (water level at or below 25cm).

5.2 Funcionament manual

If the water level is too low for the float switch to operate automatically, you can operate the pump manually.

• To operate manually, ensure the float switch is secured in an "ON" position (e.g., by tying it up).
• Plug in the pump to start. Unplug to stop.
• In manual mode, the pump can reduce the water level down to 35 mm. Monitor the pump to prevent dry running.

5.3 Pumping Dirty Water

This pump is designed to handle dirty water with solid particles up to 35 mm in diameter.

Figure 5: The DEKO Submersible Pump is capable of pumping dirty water with solids up to 35mm. This image highlights the pump's ability to manage water containing debris.

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba.

• Neteja: After each use, especially when pumping dirty water, rinse the pump with clean water to remove debris.
• Inspecció: Periodically inspect the power cable, plug, and float switch for any signs of damage. Check the water suction port for blockages.
• Emmagatzematge: Store the pump in a dry, frost-free location when not in use for extended periods.

7. Solució De Problemes

8. Especificacions tècniques

Figure 6: Technical diagram showing the dimensions and some key specifications of the DEKO Submersible Pump.

9. Garantia i Suport

For warranty information and customer support, please refer to the documentation provided with your purchase or contact DEKO customer service. Keep your proof of purchase for warranty claims.

Fabricant: DECO

For further assistance, visit the official DEKO weblloc web o contacteu amb els seus canals d'assistència.