ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire User Manual

Introducció

Gràcies per la compraasing the ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire. This manual provides essential information for the safe installation, operation, and maintenance of your new LED light fixture. Please read these instructions carefully before installation and retain them for future reference.

Instruccions de seguretat

• Seguretat elèctrica: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the main power supply is switched off at the circuit breaker before commencing any installation or maintenance work.
• Voltage: This luminaire is designed for operation with a 100-240V AC power supply. Verify your supply voltage matches this requirement.
• Muntatge: Ensure the mounting surface is structurally sound and capable of supporting the weight of the luminaire.
• Classificació IP54: This product is rated IP54, indicating protection against dust ingress and splashing water from any direction. It is suitable for both indoor and outdoor use, but not for submersion.
• Font de llum LED: El LED lamps are built-in and cannot be changed. Do not attempt to open or modify the LED module.
• Calor: The luminaire may become warm during operation. Avoid touching the surface directly after extended use.

Contingut del paquet

Si us plau, comproveu que tots els components siguin presents i no estiguin danyats abans de la instal·lació:

• ONE Light 67384/AN/W LED Luminaire (1 unit)
• Materials de muntatge (cargols, tacs de paret)
• Manual d'instruccions (aquest document)

Configuració i instal·lació

Segueix aquests passos per a una instal·lació segura i correcta:

1. Preparació: Switch off the main power supply at the circuit breaker. Ensure the installation area is clean and dry.
2. Lloc de muntatge: Select a suitable wall or ceiling location for the luminaire. Consider the desired light distribution and accessibility for future maintenance.
3. Marcatge: Use the luminaire's mounting bracket as a template to mark the drilling points on the surface.
4. Perforació: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall plugs if necessary.
5. Cablejat: Connect the electrical wires from your power supply to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) as indicated on the luminaire. Secure all connections tightly.
6. Mounting the Luminaire: Secure the luminaire to the mounting surface using the provided screws. Ensure it is firmly attached and stable.
7. Comprovació final: Double-check all connections and ensure the luminaire is securely mounted. Restore power at the circuit breaker.

Image: The ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire, showcasing its sleek, round design suitable for modern indoor and outdoor environments.

Image: Technical drawing illustrating the dimensions of the luminaire: 340mm diameter and 50mm height.

Instruccions de funcionament

The ONE Light 67384/AN/W luminaire is designed for simple operation.

• Encès/apagat: Control the luminaire using a standard wall switch (push button controller type). Flip the switch to turn the light on or off.
• Font de llum: This luminaire features a built-in LED light source that provides warm white (WW) illumination. The LEDs are non-removable and designed for long-term use.

Manteniment

Regular maintenance ensures optimal performance and longevity of your luminaire.

• Neteja: Before cleaning, ensure the power supply to the luminaire is switched off. Use a soft, damp cloth to wipe the exterior surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Lamp Substitució: El LED lamps in this luminaire are built-in and cannot be replaced. If the LED light source fails, the entire luminaire must be replaced by a qualified professional.
• Inspecció: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, switch off the power and consult a qualified electrician.

Image: EU Energy Label for the luminaire, indicating it contains built-in LED lamps that cannot be changed, in compliance with regulation 874/2012.

Resolució de problemes

If you encounter issues with your luminaire, refer to the following common problems and solutions:

• La llum no s'encén:
  • Check if the main power supply is switched on.
  • Verifiqueu que l'interruptor de paret estigui en la posició "ON".
  • Inspect electrical connections for looseness or damage (ensure power is off before inspection).
  • Check the circuit breaker for a tripped fuse.
• Parpelleig de llum:
  • Assegureu-vos que totes les connexions elèctriques siguin segures.
  • Comproveu la font d'alimentació voltage is stable and within the specified range (100-240V).
• Brillantor reduïda:
  • Clean the luminaire's surface to remove any dust or dirt accumulation.
  • Els LED tenen una llarga vida útil, però es poden degradar gradualment al llarg dels anys.

If the problem persists after attempting these solutions, contact a qualified electrician or the retailer for assistance. Do not attempt to repair the luminaire yourself.

Especificacions

Garantia i Suport

Per obtenir informació sobre la garantia, consulteu els termes i condicions proporcionats pel vostre distribuïdor en el moment de la compra. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

If you require technical support or have questions not covered in this manual, please contact the retailer where you purchased the product or visit the official ONE Light weblloc per obtenir dades de contacte.