1. Producte acabatview
The Heayzoki DC Motor Speed Controller is designed for precise control of DC brush motors. It features Pulse Width Modulation (PWM) technology for accurate and stable speed adjustment, along with a forward/reverse rotation control switch. The robust circuit board and well-designed casing ensure durability and efficient heat dissipation.
Figura 1: Frontal view of the Heayzoki DC Motor Speed Controller, highlighting its PWM control, 40A current capacity, and 12-60V DC input range.
2. Especificacions
| Marca | Heayzoki |
| Model | Heayzokii4p7n1abgm6351 |
| Entrada Voltage | DC 12-60V |
| Corrent màxim | 40A |
| Tipus de control | PWM (modulació d'amplada de pols) |
| Tipus de motor | DC Brush Motor |
| Control de rotació | Forward/Reverse/Stop (CCW Reversible Switch) |
| Material | Coure (components interns) |
| Dimensions del producte (amplada x alçada) | 90 mm x 99 mm d'amplada |
| Pes de l'article | 0.26 quilos |
Figure 2: Detailed dimensions of the speed controller for installation planning.
3. Configuració i instal·lació
Follow these steps for proper installation of your DC Motor Speed Controller:
- Desconnexió d'alimentació: Ensure all power sources are disconnected before beginning installation to prevent electrical shock.
- Muntatge: Securely mount the controller in a suitable location, considering its dimensions and ensuring adequate ventilation.
- Connexions de cablejat: Refer to the wiring diagram below and connect the power supply and motor leads to the appropriate terminals.
- Connect the positive (+) terminal of your DC power supply to the +POWER terminal del controlador.
- Connect the negative (-) terminal of your DC power supply to the -PODER terminal del controlador.
- Connect one motor lead to the +MOTOR terminal.
- Connect the other motor lead to the -MOTOR terminal.
- Verifica les connexions: Double-check all wiring for correct polarity and secure connections. Loose connections can cause malfunction or damage.
Figura 3: posterior view of the controller with clearly labeled power and motor terminals for wiring.
4. Instruccions de funcionament
Once installed, operate the speed controller as follows:
- Encès: Connect the DC power supply. The red indicator light on the front panel should illuminate.
- Motor Direction Control: Use the three-position switch labeled 'RUN' to select the motor's direction or stop it.
- Mou el commutador a UP position for forward rotation.
- Mou el commutador a MITJÀ posició per aturar el motor.
- Mou el commutador a ABAIX position for reverse rotation.
- Ajust de velocitat: Rotate the knob labeled 'SPEED CONTROL' to adjust the motor's speed.
- Turn the knob towards 'Low' for slower speeds.
- Turn the knob towards 'High' for faster speeds.
- Apagar: To turn off the system, first set the direction switch to the 'STOP' (middle) position, then disconnect the main DC power supply.
Figure 4: Front panel controls including the speed adjustment knob and the forward/reverse/stop switch.
5. Manteniment
To ensure the longevity and optimal performance of your speed controller, follow these maintenance guidelines:
- Neteja: Periodically clean the exterior of the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no dust or debris accumulates in ventilation openings.
- Inspecció: Regularly inspect all wiring connections to ensure they remain secure and free from corrosion or damage.
- Medi ambient: Operate the controller within its specified temperature and humidity ranges. Avoid exposure to excessive moisture, dust, or corrosive environments.
- Ventilació: Ensure the controller has adequate airflow around it to prevent overheating, especially during prolonged operation at high loads.
6. Solució De Problemes
If you encounter issues with your Heayzoki DC Motor Speed Controller, refer to the following table:
| Problema | Causa possible | Solució |
|---|---|---|
| El motor no funciona | No power supply; Incorrect wiring; Faulty motor; Direction switch in 'STOP' position. | Check power connections and supply voltage; Verify wiring against diagram; Test motor independently; Ensure direction switch is in 'Forward' or 'Reverse'. |
| Motor runs erratically or at incorrect speed | Loose wiring connections; Incompatible motor; Speed knob setting; Overload. | Check and secure all wiring; Ensure motor is compatible with controller specifications; Adjust speed knob; Reduce motor load. |
| El controlador es sobreescalfa | Excessive load on motor; Insufficient ventilation; Short circuit. | Reduce motor load; Ensure adequate airflow around the controller; Check for short circuits in wiring or motor. |
| Direction switch does not change motor direction | Faulty switch; Incorrect motor type (not reversible). | Verify switch functionality; Confirm motor is a reversible DC brush type. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
7. Informació de la garantia
Heayzoki products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or normal wear and tear.
8. Atenció al client
For further assistance, technical support, or warranty inquiries, please contact Heayzoki customer service through the retailer where the product was purchased or visit the official Heayzoki brand store online. When contacting support, please have your product model number (Heayzokii4p7n1abgm6351) and purchase details ready.
You can find more information about Heayzoki products at: Heayzoki Store