1. Introducció
Thank you for choosing the SEBSON HF_OUT_AA Outdoor Motion Detector. This high-frequency sensor is designed for outdoor use, offering reliable motion detection for various lighting applications. It is compatible with LED lamps and features adjustable settings for optimal performance. Please read this manual carefully before installation and use to ensure safe and correct operation.
2. Instruccions de seguretat
- Installation must be performed by a qualified electrician in accordance with national wiring regulations.
- Assegureu-vos que el subministrament elèctric estigui desconnectat abans de la instal·lació, el manteniment o la reparació.
- The product is rated IP54 for outdoor use, protecting against dust and splashing water. Do not immerse in water.
- Do not open or modify the device. Unauthorized modifications may void the warranty and pose safety risks.
- Mantenir els nens allunyats dels materials d'embalatge.
3. Producte acabatview
The SEBSON HF_OUT_AA is an anthracite-colored, surface-mounted motion detector featuring a high-frequency (HF) sensor. It is designed for outdoor applications and offers a wide detection range and adjustable settings.
Figura 3.1: Frontal view of the SEBSON HF_OUT_AA motion detector highlighting its features: 15m/180° detection, LED compatibility up to 300W, IP54 rating, 10 sec - 12 min operating duration, 300° vertical swivel, and 230V operation.
Les característiques clau inclouen:
- High-Frequency (HF) Sensor: Detects motion through non-metallic objects, offering broad coverage.
- Ampli rang de detecció: Up to 15 meters with a 180° detection angle.
- Adjustable Operating Duration: From 10 seconds to 12 minutes.
- Adjustable Ambient Brightness: Operates between 3 and 2000 lux.
- Compatible amb LED: Suporta LED lamps up to 300W and incandescent bulbs up to 1200W.
- Swiveling Wall Mount: The sensor head can be vertically swiveled up to 300° for precise aiming.
- Disseny durador: IP54 rated for outdoor use.
4. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | HF_OUT_AA |
| Dimensions (L x A x A) | 60 x 93 x 60 mm |
| Pes | 153 grams |
| Color | Antracita |
| Material | Plàstic |
| Font d'alimentació | 230 volts de corrent altern |
| Càrrega màxima (incandescent) | 1200 watts |
| Max. Load (LED/Energy Saving) | 300 watts |
| Interval de detecció | 15 metres |
| Angle de detecció | 180° |
| Swivel Angle (Vertical) | 300° |
| Operating Duration (TIME) | De 10 segons a 12 minuts |
| Ambient Brightness (LUX) | 3 a 2000 lux |
| Classe de protecció | IP54 |
| Tipus de muntatge | Muntatge de paret |
| Temperatura de funcionament | -20 °C a +40 °C |
Figure 4.1: Dimensions of the motion detector (87mm width, 93mm height, 60mm depth) and its 180° swiveling capability.
5. Configuració (Instal·lació)
Before proceeding with installation, ensure the main power supply is switched off at the circuit breaker to prevent electric shock.
5.1 Ubicació de muntatge
- Choose a stable wall surface for mounting.
- Avoid mounting near heat sources (e.g., vents, direct sunlight) or objects that might cause false triggers (e.g., moving branches, reflective surfaces).
- The optimal mounting height is typically between 1.5m and 3.5m for effective detection.
5.2 Cablejat
The motion detector requires a 3-wire connection (Live, Neutral, Switched Live). Refer to the wiring diagram below.
Figure 5.1: Wiring diagram showing connections for Live (L), Neutral (N), and Switched Live (L').
- Open the housing of the motion detector.
- Connect the Live wire (usually brown or red) to the 'L' terminal.
- Connect the Neutral wire (usually blue or black) to the 'N' terminal.
- Connect the Switched Live wire (to the lamp, usually black or brown) to the 'L'' terminal.
- Secure all connections and close the housing.
5.3 Muntatge del dispositiu
Figura 5.2: A baix view of the motion detector, indicating the mounting points.
- Mark the drilling points on the wall using the detector's base as a template.
- Perfora forats i insereix els tacs de paret adequats.
- Secure the detector to the wall using screws.
- Adjust the sensor head to the desired detection area. The head can swivel vertically up to 300°.
Figure 5.3: The sensor head can be adjusted vertically by 300°.
6. Operating (Settings)
The motion detector features three adjustable dials: LUX, SENS, and TIME. These allow you to customize the sensor's behavior.
Figure 6.1: Adjustment dials for LUX, SENS, and TIME on the side of the motion detector.
6.1 LUX (Ambient Brightness)
This dial controls the ambient light level at which the sensor becomes active. Rotate the dial to set the desired lux level:
- ‘3’ (Moon icon): The sensor will only activate in very dark conditions (approx. 3 lux).
- ‘2000’ (Sun icon): The sensor will activate in all light conditions, including daylight (approx. 2000 lux).
6.2 SENS (Sensitivity)
This dial adjusts the detection sensitivity of the sensor, influencing the range at which motion is detected.
- ‘-’ (Minimum): Lower sensitivity, shorter detection range.
- ‘+’ (Maximum): Higher sensitivity, longer detection range (up to 15m).
6.3 TIME (Operating Duration)
This dial sets how long the connected light remains on after motion is detected and no further motion is sensed.
- Ajustable de 10 segons a 12 minuts.
- Rotate clockwise for longer duration, counter-clockwise for shorter duration.
Figure 6.2: Illustration of the 180° detection area (5-15m range, 1.5-3.5m height) and detailed views of the LUX, SENS, and TIME adjustment dials.
7. Manteniment
The SEBSON HF_OUT_AA motion detector requires minimal maintenance.
- Neteja: Wipe the sensor surface gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspecció: Periodically check the mounting and wiring for any signs of damage or loose connections.
- Ensure the sensor lens is clear of dirt, dust, or spiderwebs, which can affect performance.
8. Solució De Problemes
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Light does not turn on when motion is detected. | 1. Power supply off. 2. Incorrect LUX setting. 3. Lamp defectuós. 4. Wiring error. | 1. Comproveu l'alimentació. 2. Adjust LUX dial towards 'Sun' icon. 3. Substituïu lamp. 4. Check wiring connections (ensure power is off). |
| La llum es manté encesa contínuament. | 1. Constant motion in detection area. 2. TIME setting too long. 3. Wiring error. | 1. Clear detection area of obstructions. 2. Adjust TIME dial to a shorter duration. 3. Check wiring (ensure power is off). |
| La llum s'encén sense moviment aparent. | 1. High sensitivity (SENS) setting. 2. Environmental factors (e.g., moving objects, heat sources). | 1. Adjust SENS dial towards '-'. 2. Reposition sensor or clear detection area of interference. |
| Detection range is too short. | 1. Low sensitivity (SENS) setting. 2. Obstructions in detection path. | 1. Adjust SENS dial towards '+'. 2. Clear obstructions or adjust sensor angle. |
9. Garantia i assistència
SEBSON products are manufactured with high-quality materials and undergo strict quality control. This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support or further assistance, please contact SEBSON customer service through the retailer's platform or the official SEBSON weblloc.
