1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Imatge 1.1: Frontal view of the SEBSON Outdoor Motion Detector.
2. Instruccions de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al dispositiu:
- Seguretat elèctrica: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Assegureu-vos que el vol operatiutage of 230V AC matches your electrical supply.
- Classificació IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Muntatge: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Nens: Keep packaging materials and small parts away from children.
3. Contingut del paquet
El paquet inclou:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Producte acabatview i Característiques
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Interval de detecció: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Compatible amb LED: Suporta LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Disseny durador: IP44 rated for outdoor use, anthracite color, made of plastic.
Imatge 4.1: acabatview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Configuració i instal·lació
Seguiu aquests passos per a una instal·lació correcta:
- Preparació per a la instal·lació: Abans de començar, assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
- Trieu la ubicació de muntatge: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Muntatge de la base:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Secure the detector's base firmly to the wall using screws.
- Connexions de cablejat: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Imatge 5.1: Ex.ample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Tancament d'habitatges: Carefully close the detector housing, ensuring no wires are pinched.
- Restaura l'alimentació: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Instruccions d'ús i ajustos
The motion detector features two adjustable dials for customizing its operation:
Imatge 6.1: Primer pla view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the sun icon for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the icona de lluna for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Manteniment
To ensure optimal performance and longevity of your motion detector:
- Neteja: Regularly clean the sensor lens and the outer casing amb un to suau, sec o lleugerament damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Inspecció: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Factors ambientals: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Solució De Problemes
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Light does not turn on when motion is detected. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Especificacions
| Característica | Especificació |
|---|---|
| Fabricant | SEBSON |
| Número de model | IR_OUT_BA |
| Dimensions del producte (L x A x A) | 8.6 x 6 x 9.6 cm |
| Pes | 155 grams |
| Color | Antracita |
| Material | Plàstic |
| Font d'alimentació | AC |
| Voltage | 230 Volts |
| Max. Power (LED) | 300 watts |
| Max. Power (Incandescent) | 1200 watts |
| Mètode d'instal·lació | Wall Mount (Surface-Mounted) |
| Compatibilitat del tipus de bombeta | LED |
| Interval de detecció | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 segons - 7 minuts |
| Ambient Brightness (LUX) | 3 - 2000 lux |
| Classificació IP | IP44 |
| Usos recomanats | A l'aire lliure |
| Temperatura nominal superior | 40 graus centígrads |
| País d'origen | Xina |
10. Garantia i Suport
Política de devolució: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Atenció al client: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
