Eibach Pro-Spacer Wheel Spacer Instruction Manual

Introducció

The Eibach Pro-Spacer is designed to enhance vehicle aesthetics and handling by increasing track width. This product, when installed, positions the wheels further out, filling the wheel arches for a wider stance and improved stability. It is manufactured from high-tensile strength aluminum alloy, ensuring precise fitment and exceptional wheel balance.

This manual provides essential information for the correct installation, operation, and maintenance of your Eibach Pro-Spacer. Please read all instructions carefully before proceeding with installation or use.

Informació de seguretat

WARNING: Improper installation or use of wheel spacers can lead to serious injury or vehicle damage. Always follow manufacturer's instructions and consult a qualified mechanic if unsure.

• Ensure all components are clean and free from debris before installation.
• Use appropriate tools and torque specifications.
• Regularly inspect wheel spacers and lug nuts for tightness and wear.
• Do not exceed the recommended torque values.
• Ensure sufficient thread engagement for lug nuts after spacer installation.

Què hi ha a la caixa

Your Eibach Pro-Spacer package should contain the following items:

• Pro-Spacer(s)
• Appropriate lug nuts/bolts (if included with your specific kit)
• Manual d'instruccions (aquest document)

Image 1: Contents of the Eibach Pro-Spacer kit, including the spacers, lug nuts, and packaging.

Configuració i instal·lació

This section outlines the general steps for installing Eibach Pro-Spacers. Specific vehicle requirements may vary. Always refer to your vehicle's service manual for wheel and lug nut torque specifications.

1. Preparar el vehicle: Park the vehicle on a level, stable surface. Engage the parking brake. Loosen the lug nuts on the wheel(s) to be fitted with spacers.
2. Aixecar i assegurar: Safely lift the vehicle using a jack and support it with jack stands. Remove the lug nuts and then the wheel.
3. Superfícies de muntatge netes: Thoroughly clean the vehicle's hub mounting surface and the back of the wheel spacer. Ensure there is no rust, dirt, or debris that could prevent flush contact.
4. Install Spacer: Place the Eibach Pro-Spacer onto the vehicle's hub. Ensure it sits flush against the hub.
5. Secure Spacer (if applicable): If your spacer system requires it, use the provided hardware to secure the spacer to the vehicle's hub. Torque these bolts to the manufacturer's specifications.
6. Mount Wheel: Place the wheel onto the installed spacer. Ensure the wheel sits flush against the spacer.
7. Install Lug Nuts/Bolts: Install the new, longer lug nuts/bolts (if provided or required) or the original lug nuts/bolts (if using a hub-centric spacer that uses existing studs). Hand-tighten them.
8. Vehicle inferior: Carefully lower the vehicle until the wheel just touches the ground, but the full weight is not yet on the wheel.
9. Torque Lug Nuts/Bolts: Using a torque wrench, tighten the lug nuts/bolts in a star pattern to the vehicle manufacturer's specified torque. Do not overtighten.
10. Baixada final: Baixeu completament el vehicle i traieu el gat i els suports del gat.
11. Repetiu: Repeat the process for all wheels where spacers are to be installed.

Imatge 2: Detallada view of the Eibach Pro-Spacer and accompanying lug nuts, highlighting the product's design.

Operation and Driving Considerations

Once installed, Eibach Pro-Spacers are designed to integrate seamlessly with your vehicle's wheel system. While they improve handling and appearance, it's important to be aware of the following:

• Comprovació inicial: After driving the first 50-100 kilometers (30-60 miles), re-check the torque of all lug nuts/bolts. This is crucial as components can settle.
• Handling Changes: Widening the track width can alter the vehicle's handling characteristics. Drive cautiously until you are accustomed to the changes.
• Liquidació: Ensure there is adequate clearance between the tire/wheel and fender, suspension components, and brake lines, especially during full steering lock and suspension compression.
• Compliment legal: Verify that the use of wheel spacers complies with local traffic laws and regulations.

Manteniment

Regular inspection and maintenance are vital for the safe and reliable operation of your Eibach Pro-Spacers.

• Periodic Torque Check: Re-check the torque of the lug nuts/bolts at regular service intervals (e.g., every 5,000-10,000 km or 3,000-6,000 miles) or whenever wheels are removed and reinstalled.
• Inspecció visual: Periodically inspect the spacers for any signs of damage, cracks, corrosion, or deformation. If any damage is observed, replace the spacer immediately.
• Neteja: Keep the spacers and mounting surfaces clean to prevent corrosion and ensure proper fitment.

Resolució de problemes

If you encounter issues after installing your Eibach Pro-Spacers, consider the following:

If troubleshooting steps do not resolve the issue, discontinue use and consult a qualified automotive technician.

Especificacions

• Model: S90-6-10-032-N-B
• Fabricant: Eibach
• Material: High-tensile strength aluminum alloy
• Pes de l'article: 1.28 quilos
• Dimensions del producte (L x A x A): 18.3 x 18.3 x 10 cm
• Número de peça: S90-6-10-032-N-B
• ASIN: B08TK2JDXW
• Característica clau: 114,3/5-64-160-1450 black (This appears to be a specific fitment code, likely bolt pattern, center bore, etc.)

Informació de la garantia

Eibach products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official Eibach website or contact Eibach customer service directly. Keep your proof of purchase for any warranty claims.

Atenció al client

For technical assistance, installation questions, or product inquiries, please contact Eibach customer support:

• Weblloc: www.eibach.com (Please check the official Eibach website for regional contact information.)
• Correu electrònic/Telèfon: Consulteu l'oficial weblloc web per obtenir les dades de contacte més actualitzades.