HOFTRONIC Esto 2-Light GU10 Black LED Spotlight

1. Introducció

Thank you for choosing the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight. This product is designed for indoor use, providing adjustable lighting with two GU10 LED bulbs. Constructed from high-quality aluminum, this spotlight offers a modern aesthetic and reliable performance. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Image: The HOFTRONIC Esto 2-Light GU10 Black LED Spotlight installed on a ceiling, providing illumination in a modern interior setting.

2. Instruccions de seguretat

• Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement.
• La instal·lació ha de ser realitzada per un electricista qualificat per garantir el compliment dels codis elèctrics locals i les normes de seguretat.
• This product is rated IP20 and is suitable for només per a ús interiorNo exposeu a la humitat ni a l'aigua directa.
• Assegureu-vos que el voltage supply matches the product's requirements (230V AC).
• No supereu la potència màximatage of 35 Watts per GU10 LED bulb.
• Assegureu-vos que hi hagi una ventilació adequada al voltant de l'aparell per evitar el sobreescalfament.
• No cobriu l'aparell amb material aïllant tret que estigui dissenyat específicament per a això.

3. Contingut de la caixa

Si us plau, comproveu que tots els components siguin presents i no estiguin danyats abans de continuar amb la instal·lació.

Image: Contents of the product box, including the spotlight fixture and mounting hardware.

• 1x HOFTRONIC Esto Double Black LED Ceiling Spot Fixture
• 1x clau Allen
• 4x cargols
• 4x rentadores
• 4x endolls de paret

4. Configuració i instal·lació

Follow these steps for safe and correct installation of your LED spotlight.

1. Preparació per a la instal·lació: Assegureu-vos que l'alimentació principal de la zona d'instal·lació estigui desconnectada a l'interruptor.
2. Marca els punts de perforació: Position the fixture on the ceiling at the desired location. Use the mounting holes on the base of the fixture to mark the drilling points. Refer to the diagram below for mounting dimensions.


Image: Detailed diagram of the spotlight's base with mounting hole dimensions (69mm x 69mm spacing, 4mm diameter holes, 13mm edge distance, max 12mm cable inlet).

3. Forats: Perforeu els forats als punts marcats. Introduïu els tacs de paret proporcionats als forats.
4. Connecteu el cablejat: Open the terminal cover on the fixture. Carefully connect the electrical wires from your ceiling to the terminal block inside the fixture. Ensure correct connections: Live (L), Neutral (N), and Earth (⌀). The cable inlet supports a maximum diameter of 12mm.
5. Muntar l'aparell: Align the fixture's mounting holes with the wall plugs. Secure the fixture to the ceiling using the provided screws and washers. Do not overtighten.
6. Insert GU10 Bulbs: Insert two GU10 LED bulbs (not included) into the lamp holders. Ensure they are securely twisted into place. Do not exceed 35 Watts per bulb.
7. Restaura l'alimentació: Once installation is complete and all connections are secure, restore the main power supply.

5. Instruccions de funcionament

The HOFTRONIC Esto spotlight is designed for simple operation.

• Encès/apagat: Control the spotlight using your standard wall light switch.
• Ajusta la direcció de la llum: The GU10 fittings are tiltable, allowing you to adjust the light direction by up to 30 degrees. Gently pivot the inner lamp holders to direct the light as desired.

Image: Illustration of the adjustable light direction, demonstrating the 30-degree tilt capability of the GU10 fittings.

6. Manteniment

Regular maintenance will help prolong the life and appearance of your spotlight.

• Neteja: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior of the spotlight with a soft, dry, or slightly damp drap. No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar l'acabat.
• Substitució de bombetes:
  1. Apagueu la font d'alimentació de l'aparell.
  2. Deixeu que la bombeta es refredi completament si s'ha utilitzat recentment.
  3. Gently push the GU10 bulb into its fitting and twist it counter-clockwise to remove.
  4. Insert a new GU10 LED bulb (max 35W) by pushing it into the fitting and twisting clockwise until secure.
  5. Restaura el poder.

7. Solució De Problemes

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• La llum no s'encén:
  • Comproveu si la font d'alimentació principal està connectada.
  • Assegureu-vos que l'interruptor de paret estigui en la posició "on".
  • Verify that the GU10 bulbs are correctly inserted and not faulty.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Parpelleig de llum:
  • Ensure GU10 bulbs are fully seated in their sockets.
  • Try replacing the bulb to rule out a faulty bulb.
  • Check for loose wiring connections (with power off).
• Fixture feels hot:
  • Confirm that the installed GU10 bulbs do not exceed the maximum wattage de 35W.
  • Ensure there is no obstruction preventing proper heat dissipation.

If problems persist, contact customer support or a qualified electrician.

8. Especificacions

Image: Overall dimensions of the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight.

9. Garantia

This HOFTRONIC product comes with a 3 any de garantia, reflecting our commitment to quality and durable construction. The robust aluminum enclosure ensures a long lifespan for your ceiling light.

Image: Warranty information, indicating a 3-year warranty and durable build quality.

10. Suport

For further assistance, technical support, or warranty claims, please contact your retailer or the HOFTRONIC customer service department. Refer to your purchase documentation for contact details.