Texecom AKD-0001 Capture Grade 2 Wired 20m Dual Tech PIR Sensor

Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your Texecom AKD-0001 Capture Grade 2 Wired 20m Dual Tech PIR Sensor. This advanced motion detector combines Passive Infrared (PIR) and Microwave (MW) technologies to provide reliable and accurate detection, minimizing false alarms. Please read this manual thoroughly before installation and keep it for future reference.

Informació de seguretat

Seguiu sempre les precaucions de seguretat següents per evitar lesions o danys al dispositiu:

• La instal·lació només l'ha de dur a terme personal qualificat d'acord amb els codis i les normatives elèctriques locals.
• Ensure power is disconnected before performing any wiring or maintenance.
• Do not expose the sensor to extreme temperatures, humidity, or direct water.
• Use only specified power sources (Corded Electric).
• Avoid placing the sensor near heat sources, direct sunlight, or strong air currents, which can cause false alarms.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Texecom AKD-0001 Capture Grade 2 Dual Tech PIR Sensor
• Cargols de muntatge i tacs de paret
• Plantilla d'instal·lació (si s'inclou)
• Aquest manual d'usuari

Producte acabatview

The Texecom AKD-0001 sensor is designed for robust indoor motion detection. It features a sleek white casing and a prominent spherical lens for optimal detection coverage.

Figura 1: Frontal view of the Texecom AKD-0001 PIR Sensor. The sensor is white with a large, clear, spherical detection lens in the center.

Figura 2: lateral view of the Texecom AKD-0001 PIR Sensor, illustrating its compact design suitable for wall mounting.

Components clau:

• Lent de detecció: The spherical lens is optimized for a 20-meter detection range.
• LED d'estat: (Location may vary) Indicates detection events and operational status.
• Bloc de terminals: For wired connections (power, alarm, tamper).
• Base de muntatge: Dissenyat per a un muntatge segur a la paret.

Configuració i instal·lació

Selecció d'una ubicació:

• Mount the sensor in a corner or on a flat wall at a height of 2.0 to 2.4 meters (6.5 to 8 feet) for optimal coverage.
• Avoid aiming the sensor directly at windows, heat sources (radiators, vents), or areas with significant air currents.
• Assegureu-vos que la zona de detecció estigui lliure d'obstacles grans.

Passos de muntatge:

1. Prepareu la superfície de muntatge: Ensure the wall is clean and stable.
2. Marqueu els forats de perforació: Use the provided mounting template (if applicable) or the sensor's base to mark the screw positions on the wall.
3. Forats: Drill pilot holes for the mounting screws. Insert wall plugs if mounting into drywall or masonry.
4. Cablejat de ruta: Feed the necessary alarm system wiring through the opening in the sensor's backplate.
5. Base segura: Attach the sensor's mounting base to the wall using the provided screws.
6. Connexions de cable: Connect the power (12V DC), alarm, and tamper zone wires to the appropriate terminals on the sensor's PCB. Refer to your alarm panel's manual for specific wiring diagrams.
7. Attach Sensor Body: Carefully clip or screw the main sensor body onto the mounted base, ensuring all wires are neatly tucked away and not pinched.

Funcionament del sensor

The Texecom AKD-0001 is a passive device that detects motion by sensing changes in infrared radiation (PIR) and microwave reflections (MW). When both technologies detect movement simultaneously, an alarm signal is generated.

Prova de caminada:

After installation, perform a walk test to confirm the sensor's coverage and functionality:

1. Enceneu el sistema d'alarma.
2. Walk through the entire intended detection area, observing the sensor's status LED.
3. The LED should illuminate when motion is detected.
4. Adjust the sensor's position or sensitivity (if adjustable via jumpers/DIP switches, refer to specific product datasheet) until the desired coverage is achieved.

Nota: The dual-tech nature of this sensor helps reduce false alarms by requiring confirmation from both PIR and Microwave elements before triggering an alarm.

Manteniment

The Texecom AKD-0001 sensor requires minimal maintenance to ensure optimal performance.

• Neteja: Periodically wipe the sensor's lens and casinNetegeu amb un drap suau, sec i sense borrissol. No utilitzeu productes de neteja abrasius ni dissolvents.
• Comprovació d'obstruccions: Regularly check that no objects (e.g., furniture, plants) are obstructing the sensor's field of view.
• Prova de funcionalitat: Perform a walk test annually or as recommended by your alarm system provider to ensure continued proper operation.

Resolució de problemes

Especificacions

Garantia i Suport

Texecom products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Texecom weblloc.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your authorized Texecom installer or distributor. You may also find additional resources and contact information on the official Texecom weblloc: www.texecom.com