XTRARM Flex 80 cm TV Wall Mount Instruction Manual

Introducció

Thank you for choosing the XTRARM Flex 80 cm TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new TV wall mount. Please read these instructions carefully before installation and retain them for future reference.

Informació de seguretat

• Capacitat de pes: Do not exceed the maximum load capacity of 60 kg (132 lbs). This mount is designed for TVs between 42 and 85 inches.
• Tipus de paret: Ensure the mounting surface can safely support the combined weight of the mount and your TV. This mount is suitable for solid concrete walls, brick walls, and solid wood studs. Avoid mounting on drywall alone without proper reinforcement.
• Instal·lació professional: Si no esteu segurs del procés d'instal·lació o de l'adequació de la vostra paret, consulteu un professional qualificat.
• Nens: Keep all components and packaging materials away from children.
• Eines: Feu servir les eines adequades i porteu equips de seguretat durant la instal·lació.

Què s'inclou

Verifiqueu que tots els components siguin presents abans de començar la instal·lació. El paquet inclou:

• Muntatge de muntatge a la paret
• Plantilla de perforació
• Various Screws, Wall Anchors, and Washers for TV and Wall Mounting
• Espaciadors
• Tecles hexagonals
• Lligaments de gestió de cables

Figure 1: All included components and tools for installation.

Especificacions

Figure 2: Detailed dimensions of the XTRARM Flex 80 cm TV Wall Mount.

Comprovació de compatibilitat

Before installation, ensure your TV is compatible with this wall mount:

1. Check TV Size: Your TV screen size must be between 42 and 85 inches.
2. Check TV Weight: Your TV's weight must not exceed 60 kg (132 lbs).
3. Comprova el patró VESA: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This mount supports VESA patterns from 100x100 mm up to 400x400 mm.

Figure 3: Steps to verify TV compatibility with the wall mount.

Configuració i instal·lació

1. Preinstal·lació

• Gather all necessary tools (drill, stud finder, level, pencil, screwdriver).
• Determine the desired mounting height for your TV.
• Locate wall studs if mounting on wood, or ensure the concrete/brick wall is solid.

2. Muntatge de la placa de paret

1. Place the drilling template on the wall at the desired height and use a level to ensure it is straight. Mark the drill holes.
2. Drill pilot holes at the marked locations. For concrete/brick, insert wall anchors.
3. Attach the wall plate to the wall using the provided screws and washers. Ensure it is securely fastened.

3. Attaching TV Brackets

1. Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta.
2. Attach the TV brackets to the back of your TV using the appropriate screws, washers, and spacers for your TV's VESA pattern. Ensure they are tightened securely.

4. Penjar el televisor

1. With assistance, carefully lift the TV and hook the attached brackets onto the wall plate.
2. Secure the TV to the wall mount using the safety screws or locking mechanisms provided.

Figura 4: Mésview del procés d'instal·lació.

Funcionament i ajustos

Extensió

The articulated arm allows the TV to extend up to 80 cm from the wall, providing flexible positioning. Gently pull or push the TV to adjust the distance.

Figure 5: The mount's extension capability for flexible viewing.

Giratòria

The mount allows for a swivel of up to 180 degrees (left to right), depending on your TV size and wall distance. This enables optimal viewing from various angles in a room.

Inclinació

Ajusteu la vertical viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment screws, set the desired angle, and re-tighten the screws.

Rotació

For specific applications, the TV can be rotated ±90 degrees to switch between landscape and portrait orientation. This feature provides maximum freedom of movement.

Figure 6: Tilt and rotation adjustments for personalized viewing.

Figure 7: Maximum freedom of movement with multiple articulation points.

Gestió de cables

Use the integrated cable management system or provided cable ties to organize and secure cables along the mount arm for a neat appearance.

Manteniment

• Neteja: Netegeu el suport amb un drap suau i sec. Eviteu netejadors o dissolvents abrasius.
• Comprovacions periòdiques: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que estiguin ben ajustats i segurs. Torneu a apretar-los si cal.
• Lubricació: The moving parts are designed for smooth operation. If any joints become stiff, a small amount of silicone-based lubricant can be applied.

Resolució de problemes

• El televisor no està anivellat: Check the wall plate installation with a level. Adjust the leveling screws on the TV brackets if available, or re-adjust the wall plate if significantly off.
• La muntura se sent fluixa: Immediately check all mounting screws on both the wall plate and the TV brackets. Ensure they are fully tightened. If the wall anchors are compromised, professional assistance may be required.
• Difficulty adjusting movement: Ensure no cables are snagged. Check if any adjustment screws (for tilt or swivel) are overtightened. Loosen slightly with the provided hex key if needed.
• Peces que falten: Refer to the "What's Included" section. Contact customer support if any essential parts are missing.

Garantia i Suport

Garantia

This XTRARM product comes with a 5-year manufacturer's warranty, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Atenció al client

For technical assistance, missing parts, or warranty inquiries, please contact XTRARM customer support through the retailer's platform or visit the official XTRARM weblloc per obtenir informació de contacte.