Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your SPRT Thermal Label Printer, Model 890 E. Please read this manual thoroughly before using the printer to ensure proper functionality and to extend the product's lifespan.
Imatge: Frontal view of the SPRT Thermal Label Printer 890 E, showing its compact black design and paper output slot.
Característiques principals:
- Printing Method: Thermal Line
- Print Speed: 220 mm/second
- Resolution: 8 dots/mm, 576 dots/line
- Effective Print Width: 72 mm
- Character Set: ASCII, GB18030 (Chinese), and BIG5
- Characters per Line: 42/48
- Tipus de paper: Paper tèrmic
- Paper Roll Diameter: Maximum: 80.0 mm
- Inner Diameter of Roll Core: 13 mm (minimum)
- Paper Cutting Life: 60 million lines
- Thermal Print Head Life: 100 KM
Configuració
- Desembalatge: Carefully remove the printer from its packaging. Ensure all components are present: printer unit, power adapter, USB cable, and user manual.
- Connectar l'alimentació: Connect the power adapter to the printer's power input port and then plug it into a suitable power outlet.
- Carregueu paper tèrmic:
- Open the paper compartment cover by pressing the release button or lifting the latch.
- Insert a thermal paper roll with the printing surface facing the print head. Ensure the roll is seated correctly.
- Pull a small amount of paper out past the cutter and close the cover firmly until it clicks into place.
- Connexió a l'ordinador: Connect the printer to your computer using the provided USB cable. Insert one end into the printer's USB port and the other into an available USB port on your computer.
- Instal·leu els controladors: Insert the driver CD (if provided) or download the latest drivers from the SPRT official weblloc. Seguiu les instruccions que apareixen a la pantalla per completar la instal·lació del controlador.
- Encès: Flip the power switch located on the side or back of the printer to the "ON" position. The power indicator light should illuminate.
Instruccions de funcionament
- Printing a Test Page: After driver installation, you can print a test page from your computer's printer settings to confirm proper setup.
- Enviament de treballs d'impressió: From your application (e.g., POS software, word processor), select the SPRT 890 E printer and initiate the print command.
- Alimentació de paper: Use the feed button on the printer to advance the paper manually.
- Tall automàtic: The printer features an automatic cutter. After each print job, the paper will be cut automatically.
Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil de la impressora.
- Neteja del capçal d'impressió:
- Apagueu la impressora i desconnecteu el cable d'alimentació.
- Obriu el compartiment de paper.
- Gently wipe the thermal print head (the dark strip) with a cotton swab lightly dampamb alcohol isopropílic.
- Deixeu que el capçal d'impressió s'assequi completament abans de tancar la tapa i engegar la impressora.
- Neteja del rodet de la platina: Utilitzeu un drap suau i sense pelusa dampened with isopropyl alcohol to clean the rubber platen roller.
- Neteja exterior: Wipe the exterior of the printer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Substitució de paper: Replace the paper roll as soon as the "Paper" indicator light illuminates or when print quality degrades.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La impressora no s'encén. | Power cable not connected, power switch off, faulty power adapter. | Check power cable connection, ensure power switch is ON, try a different power outlet. |
| No s'imprimeix o la sortida és en blanc. | Paper loaded incorrectly (upside down), out of paper, print head dirty, driver issue. | Reload paper correctly, replace paper roll, clean print head, reinstall printer drivers. |
| Poca qualitat d'impressió. | Dirty print head, low quality thermal paper, print head wear. | Clean print head, use high-quality thermal paper, contact support if print head is worn. |
| Emballament de paper. | Incorrect paper loading, foreign object in paper path. | Turn off printer, open cover, carefully remove jammed paper, ensure no obstructions. |
| Impressora no reconeguda per l'ordinador. | USB cable disconnected, driver not installed or corrupted. | Check USB cable connection, reinstall printer drivers, try a different USB port. |
Especificacions
| Característica | Detall |
|---|---|
| Fabricant | SPRT |
| Marca | SPRT |
| Número de model | 890 E |
| Dimensions del paquet | 28.4 x 18 x 17.4 cm |
| Pes de l'article | 1.58 quilos |
| Data de primera disponibilitat | 30 de març de 2021 |
| Tecnologia de connectivitat | USB |
| Tecnologia d'impressora | Tèrmica |
| Característiques especials | Portàtil |
| Nom del model | SP |
| Sortida de la impressora | Monocrom |
| Mida màxima del suport | 80.0 mm |
| Impressió dúplex | No |
Garantia i Suport
Your SPRT Thermal Label Printer 890 E comes with standard manufacturer warranty. For extended coverage, consider the following protection plans:
- Extended warranty for one year from Salama (email delivery)
- Extended warranty for two years from Salama (email delivery)
For technical support, driver downloads, or further assistance, please visit the official SPRT weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
