Producte acabatview
The Thule Bike Protector is an accessory designed to provide additional protection for bicycles when they are transported or stored in close proximity, such as on a bike rack. It prevents direct contact between bike frames and components, minimizing the risk of dents and scratches.
Característiques principals:
- Ajust versàtil: Designed to accommodate various bike frame geometries.
- Ajust fàcil: Features an adjustable design with no loose parts, simplifying installation and removal.
- Contact Prevention: Utilizes a rubber spacer to create separation between potential contact points.
- Secure Fixation: Includes a sturdy strap to secure bikes together, further preventing movement and contact.
- Ús polivalent: Suitable for transportation, parking, and storage scenarios.
Instruccions de configuració
Follow these steps to properly install the Thule Bike Protector to ensure maximum protection for your bicycles.
- Identify Contact Points: Before placing bikes on a rack or in storage, identify areas where bike frames, handlebars, pedals, or other components might come into contact with each other.
- Position the Protector: Place the rubber spacer component of the Thule Bike Protector between the identified contact points. Ensure the spacer is firmly seated to create a buffer.
- Secure with Strap: Wrap the integrated sturdy strap around the bike frames or components that need to be held together. Pull the strap taut and secure it to prevent movement. The strap should be tight enough to hold the bikes firmly but not so tight as to damage components.
- Verifica la ubicació: Once installed, gently shake the bikes to confirm that the protector is effectively separating them and that the strap is holding them securely. Adjust as necessary.
Image: Two Thule Bike Protectors, illustrating the design with a rubber spacer and securing strap.
Imatge: Primer pla view of the Thule Bike Protector in use, separating two bicycles on a car-mounted rack.
Image: Wider view of bikes secured with the Thule Bike Protector on a car rack, demonstrating effective separation.
Instruccions de funcionament
The Thule Bike Protector is designed for continuous use during bike transportation, parking, and storage to prevent damage.
- During Transport: Ensure the protector is securely fastened before starting any journey. Periodically check its position and tightness during long trips.
- Parking and Storage: Use the protector when bikes are parked closely together or stored in a garage or shed to prevent accidental contact and damage.
- Eliminació: To remove, unfasten the strap and carefully detach the rubber spacer from between the bikes.
Manteniment
Proper maintenance ensures the longevity and effectiveness of your Thule Bike Protector.
- Neteja: Clean the protector with mild soap and water. Rinse thoroughly and allow it to air dry completely before storage. Avoid harsh chemicals or abrasive cleaners.
- Inspecció: Regularly inspect the rubber spacer for any signs of wear, tears, or damage. Check the strap for fraying or loss of elasticity. Replace the protector if significant wear is observed to maintain optimal protection.
- Emmagatzematge: Store the protector in a cool, dry place away from direct sunlight when not in use.
Resolució de problemes
If you encounter issues with your Thule Bike Protector, refer to the following common solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| Bikes still touching despite protector. | Incorrect placement of the protector or insufficient strap tightness. | Reposition the rubber spacer to the exact contact point. Ensure the strap is pulled taut and securely fastened to minimize bike movement. Consider using additional protectors if multiple contact points exist. |
| Protector slips out of position. | Strap is not tight enough or protector is not properly seated. | Tighten the strap firmly. Ensure the rubber spacer is wedged securely between the bike components. The design allows for a snug fit on various frame shapes. |
| Strap appears worn or damaged. | Normal wear and tear or excessive force during tightening. | Discontinue use if the strap is compromised. Contact Thule customer support for replacement options or consider purchasing a new unit to ensure reliable protection. |
Especificacions del producte
| Nom del model | Bike Protector |
| Número de part | 988000 |
| Marca | Thule |
| Material | Plàstic |
| Dimensions de l'article (LxWxH) | 3.9 x 7 x 15 polzades |
| Pes de l'article | 4.59 unces |
| Dimensions del paquet (LxWxH) | 7.17 x 6.5 x 3.35 polzades |
| Pes del paquet | 0.29 quilos |
| Nombre d'articles | 1 |
| Usuaris suggerits | Adult unisex |
| Any model | 2021 |
Informació de la garantia
The Thule Bike Protector is covered by a Garantia limitada de per vida. This warranty covers defects in materials and workmanship. For specific terms, conditions, and to make a warranty claim, please refer to the official Thule website or contact Thule customer support directly.
Atenció al client
For further assistance, questions, or to report any issues not covered in this manual, please contact Thule customer support:
- Weblloc: Visit the official Thule weblloc web per a preguntes freqüents, registre de productes i informació de contacte.
- Formulari de contacte: Utilize the online contact form available on the Thule support page.
- Telèfon: Refer to the Thule weblloc web per a números de telèfon d'atenció al client regionals.
When contacting support, please have your product model (988000) and purchase details available.