QVEVDACAR EL Wire Interior Car LED Strip Lights Instruction Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your QVEVDACAR EL Wire Interior Car LED Strip Lights. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Característiques del producte

• Upgraded USB Driver: Features a new USB drive and power box designed for quieter operation compared to previous models.
• Flexible EL Wire: The neon rope light is approximately 5 meters (16.5 feet) long with a wire diameter of 2.3mm and a 6mm sewing edge. It is flexible, water-resistant, and can be bent into various shapes and cut to desired lengths (new ends must be sealed).
• Safe and Tidy Installation: Powered by USB, allowing for installation in car gaps to create an ambient lighting effect while maintaining a neat interior. The EL wire generates no heat even during prolonged use and is brighter than standard EL wires.
• Aplicacions versàtils: Suitable for car interior decoration, home decoration, shopping window displays, festival fences, outdoor signs, stage design, nighttime fountains, lighting banners, and clothing.

Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:

• 1 x 16.5ft (5M) EL Wire
• 1 x USB Driver
• 1 x eina de palanca

Especificacions

Configuració i instal·lació

Follow these steps for proper installation of your EL Wire LED strip lights:

1. Planifica el teu disseny: Before beginning, determine the desired path for the EL wire within your car's interior. Identify gaps in the dashboard, door panels, or console where the sewing edge can be inserted.
2. Prepareu l'àrea d'instal·lació: Ensure the surfaces are clean and free of dust or debris.
3. Insert the Fiber: Use the provided pry tool to gently open gaps in your car's interior trim. Carefully insert the sewing edge of the EL wire into these gaps. Work slowly to ensure a snug fit and avoid damaging the trim.


Figure 1: Inserting the EL wire into a car's interior gap using the pry tool.

4. Cut Excess Fiber: Once the EL wire is routed to your satisfaction, cut any excess length. Important: After cutting, you must seal the new end of the EL wire to prevent damage and ensure proper function. Use electrical tape or a suitable sealant.


Figure 2: Cutting the EL wire to the desired length.

5. Connecteu el cable USB: Plug the USB driver into a compatible USB port in your car.

Figure 3: Plugging the USB cable into the car's USB port.
6. Verifica la instal·lació: Turn on your car's ignition and check if the EL wire lights up. Adjust the placement as needed for optimal aesthetic and secure fit.

Consell d'instal·lació: For complex installations or to ensure a professional finish, consider having a second person assist you. The pry tool is essential for creating space in tight gaps.

Figura 4: Example of a finished EL wire installation in a car interior.

Figura 5: Un altre view of the EL wire creating an ambient lighting effect in a car interior.

Figure 6: Before and after comparison of EL wire installation in a car interior.

Instruccions de funcionament

The QVEVDACAR EL Wire LED Strip Lights are designed for simple operation:

• Encès/apagat: The EL wire lights will illuminate automatically when the USB driver is connected to a powered USB port in your vehicle. They will turn off when the power to the USB port is cut (e.g., when the car is turned off or the USB cable is unplugged).
• Brillantor: The EL wire provides a consistent ambient glow. There are no adjustable brightness settings on this model.
• So: The upgraded USB driver is designed for quiet operation. While it may produce a very faint sound if held directly to the ear, it should not be noticeable during normal use in a vehicle.

Manteniment

To ensure the longevity and optimal performance of your EL Wire LED strip lights, follow these maintenance guidelines:

• Neteja: Gently wipe the EL wire with a soft, damp cloth if it becomes dirty. Avoid using harsh chemicals or abrasive cleaners, as these can damage the wire's coating and affect its light output.
• Sealing Cut Ends: If you cut the EL wire to a custom length, ensure the new end is properly sealed with electrical tape or a suitable sealant to prevent moisture ingress and maintain functionality.
• Eviteu la flexió excessiva: While flexible, repeated sharp bends or kinks can damage the internal components of the EL wire. Install it with smooth curves where possible.
• Resistència a l'aigua: The EL wire is water-resistant, meaning it can withstand splashes. However, it is not designed for submersion. Avoid direct exposure to heavy water streams.

Figure 7: The EL wire demonstrating water resistance.

Resolució de problemes

Garantia i Suport

QVEVDACAR is committed to providing quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly through the platform where the product was purchased.

For more information about QVEVDACAR products, you may visit the official brand store: QVEVDACAR Store.